Modeling of failure mode of laser welds in lap-shear specimens of HSLA steel sheets

Failure mode of laser welds in lap-shear specimens of high strength low alloy (HSLA) steel sheets is investigated in this paper. The experiments for laser welds in lap-shear specimens under quasi-static loading conditions are briefly reviewed first. The experimental results showed that the laser welds failed in a ductile necking/shear failure mode and the ductile failure was initiated at a distance away from the crack tip near the boundary of the base metal and heat affected zone. In order to understand the failure mode of these welds, finite element analyses under plane strain conditions were conducted to identify the effects of the different plastic behaviors of the base metal, heat affected zone, and weld zone as well as the weld geometry on the ductile failure. The results of the reference finite element analysis based on the homogenous material model show that the failure mode is most likely to be a middle surface shear failure mode in the weld. The results of the finite element analysis based on the multi-zone non-homogeneous material models show that the higher effective stress–plastic strain curves of the weld and heat affected zones and the geometry of the weld protrusion result in the necking/shear failure mode in the load carrying sheet. The results of another finite element analysis based on the non-homogeneous material model and the Gurson yield function for porous materials indicate that the consideration of void nucleation and growth is necessary to identify the ductile failure initiation site that matches well with the experimental observations. Finally, the results of this investigation indicate that the failure mode of the welds should be examined carefully and the necking/shear failure mode needs to be considered for development of failure or separation criteria for welds under more complex loading conditions.     

Proposed improvements in sand-lime bricks and mortar bonding

The results of a study by Asim Yeginobali and Hikmat Hammdouni provides valuable information for improving the quality of local masonry mortars, the sand-lime bricks and the bonding between them. As a result of this study, improvements have been recommended for both mortar content and sand-lime brick manufacture.     

A new mesoporous FeBO3 material having dominant surface magnetism

A new mesoporous iron(III) borate material has been synthesized hydrothermally by using supramolecular assembly of cationic (cetyltrimethylammonium bromide, CTAB) or anionic (sodiumdodecyl sulfate, SDS) surfactant as structure directing agent (SDA) during co-condensation of Fe(III) and H₃BO₃ under controlled pH condition. Powder X-ray diffraction, N₂ sorption, HRTEM, FE-SEM-EDS, AAS, FT-IR and UV–Vis spectroscopic tools, Mössbauer and magnetization measurements are used to characterize the nanostructure, porosity, morphology, chemical composition and magnetic properties. Template molecules can be removed from the as-synthesized material by two consecutive HCl–EtOH extraction and the template-free sample showed good surface area with a peak pore width of ca. 2.6 nm. Spectroscopic results suggested the octahedral coordination of Fe(III) in the FeBO₃ framework. Magnetic measurements suggested the coexistence of antiferromagnetic core and the glassy magnetic behavior. The glassy magnetic behavior is ascribed to the dominant surface magnetism for mesoporous FeBO₃. Acid catalytic properties of this material in liquid phase benzylation of mesityline and anisole have been studied.     

Ground plane impact on quadrifilar helix antenna performance with respect to deployment heights

Quadrifilar helix antenna (QHA) has its applications in satellite communications. This paper presents the performance optimisation of input and radiation characteristics of QHA in the presence of infinite and finite metallic ground planes. For the infinite ground plane, it has been observed that input parameters such as impedance and voltage standing wave ratio (VSWR) are stable, and the antenna has broader half power beamwidth (HPBW). Smaller metallic platforms that act as finite ground planes produce better 3‐dB axial ratio beamwidth and boresight axial ratio. Deployment of QHA on smaller metallic platforms such as nanosatellites and CubeSats enhances the circularly polarised beamwidth of the antenna with improved boresight axial ratio. However, on large low earth orbit (LEO) satellites, stable input characteristics and broader HPBW have been achieved at the cost of narrow circularly polarised beamwidth and degraded boresight axial ratio.     

Mapping past,current and future energy research trend in Pakistan: a scientometric assessment

This work describes the contribution of researchers in the field of the energy from Pakistan in the period 1990–2016. A scientometric approach was applied to analyze the scientific publications in the field using the Scopus Elsevier database. Different aspects of the publications were analyzed, such as publication type, major research areas, journals, citations, authorship pattern, affiliations as well as the keyword occurrence frequency. The present research trends are analyzed and future research directions are outlined. The impact factor, h-index and number of citations were used to investigate the strength of active institutes, authors, and journals in the field of the energy in Pakistan. From 1990 to 2016, 991 articles have been published by 2139 authors from 213 research institutes. The total number of citations and impact factor are 10,287 and 2301 respectively, corresponding to 10 citations per paper and an impact factor of 2.32 per publication. The research articles originate primarily from COMSATS, NUST, PIEAS, and PINSTECH. Pakistan has published 60% of publication with the collaboration of the foreign institutes, mainly from the United States, the United Kingdom, China and Malaysia. The core research activities in the field are mainly focused on resource assessment, energy policy, energy efficiency, feasibility study, energy economics, and performance assessment. The most productive journal, author, institution, are renewable & sustainable energy review, Shahbaz M., and COMSATS, respectively.     

Standard potentials of the silver-silver iodide electrode in aqueous mixtures of ethanol and propan-2-ol at different temperatures. Free energies and entropies of transfer of hydroiodic acid at 25°

Standard potentials of E^θ of the silver-silver iodide electrode in ethanol + water and propan-2-ol + water mixtures have been determined from the emf of the cell Pt, H₂ (g, 1 atm)|HI(itm), solvent| Agl-Ag at seven temperatures ranging from 10 to 40° for ethanol and from 5 to 35° for propan-2-ol. Free energies ΔS^gq_itt of transfer HI obtained therefrom have been briefly discussed in the light of ion-solvent interactions and solvent structure.     

Generation of electrical energy using lead zirconate titanate (PZT-5A) piezoelectric material: Analytical,numerical and experimental verifications

Energy harvesting is the process of attaining energy from the external sources and transforming it into usable electrical energy. An analytical model of piezoelectric energy harvester has been developed to determine the output voltage across an electrical circuit when it is forced to undergo a base excitation. This model gives an easy approach to design and investigate the behavior of piezoelectric material. Numerical simulations have been carried out to determine the effect of frequency and loading on a Lead zirconate titanate (PZT-5A) piezoelectric material. It has been observed that the output voltage from the harvester increases when loading increases whereas its resonance frequency decreases. The analytical results were found to be in good agreement with the experimental and numerical simulation results.