Modélisation d'un four de calcination du coke de pétrole: II. Simulation du procédé

A one-dimensional steady-state mathematical model has been developed to simulate the process of calcination of petroleum coke in a rotary kiln. A simulation is made to reproduce the operating conditions prevailing during a normal working day, in order to validate the model, and to study the effects of the main process control variables. It has been found that of the energy provided by combustion, 59.5 % comes from hydrogen, 14.6 % from the carbon of the coke bed, 13.8 % from coke dust, 11.3 % from methane and 0.8 % from tar. A comparison with existing models is made to identify eventual similarities between the various kilns under study. It appears that maximum coke temperature occurs at 45 to 55 % of kiln length, while volatile matters evolution takes place between 5 and 60 % of kiln length, measured from feed end.     

Gasification kinetics of oil sands coke

Kinetics of steam gasification of delayed and fluid cokes derived from Athabasca bitumen have been studied in 6.35 cm diameter stirred and fixed bed reactors. Experiments were carried out at atmospheric pressure and at temperatures between 800°C and 930°C. The coke particle size ranged from 0.1 to 3.5 mm, and the steam partial pressure was varied from 15.2 to 60.6 kPa. Scanning electron microscopy, surface area analysis, and mercury porosimetry were employed to relate physical structure changes in the solids to experimental kinetic data. Several kinetic models for gasification were tested with the experimental gasification data. Rate expressions are presented for carbon conversion and for the release of sulphur.     

EFFECT OF NONSOLVENT ADDITIVES ON THE PORE SIZE AND THE PORE SIZE DISTRIBUTION OF AROMATIC POLYAMIDE RO MEMBRANES

In this paper discussions are made on the effect of nonsolvent swelling agents on the average pore size and pore size distributions at the surface of polyamide membranes which result from casting solutions involving above nonsolvent swelling agents.

The size of the polymer aggregate in the film casting solution and the size of polymer network pores are correlated to physicochemical data of ions which constitute the electrolytes used as nonsolvent swelling agents. As such ionic properties the charge density and the free energy of transition of ions from polyamide phase to water phase were considered. The validity of the correlation is limited in a range of casting solution composition where the polymer concentration in the casting solution is close to the limiting concentration of polymer at the phase boundary and the molar ratio of the nonsolvent swelling agent to the amide group involved in the polyamide polymer is equal to or slightly more than 0.7.     

Relationship between chemical degradation and thickness loss of an amine-cured epoxy coating exposed to different UV environments

The relationship between chemical degradation and thickness loss of an unpigmented, non UV-stabilized, crosslinked amine-cured epoxy coating exposed to three UV conditions was investigated. Spin-coated samples having a thickness of approximately 7 μm on an Si substrate were prepared from a stochiometric mixture of a bisphenol A epoxy resin and a tetra-functional amine curing agent. Samples were exposed outdoors and to two accelerated laboratory UV environments. Chemical degradation and thickness loss were measured by transmission Fourier transform infrared spectroscopy (FTIRS) and laser scanning confocal microscopy (LSCM), respectively. In addition, surface roughness and morphological changes were measured by atomic forcemicrosocopy (AFM) and LSCM. Substantial chemical degradation, thickness loss, and morpholocal changes occurred in the exposed films, and the rate of chemical degradation was greater than that due to the thickness loss. This additional chemical loss was attributed to an inhomogeneous degradation process in which nanoscale localized depressions initiate at certain sites on the surface, which then enlarge and deepen with exposure time. The results of this study provide a better understanding of the degradation mechanism and should lead to the development of scientific-based models for predicting the service life of crosslinked amine-cured epoxy coatings. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL     

Illuminant Aware Gamut‐Based Color Transfer

This paper proposes a new approach for color transfer between two images. Our method is unique in its consideration of the scene illumination and the constraint that the mapped image must be within the color gamut of the target image. Specifically, our approach first performs a white‐balance step on both images to remove color casts caused by different illuminations in the source and target image. We then align each image to share the same ‘white axis’ and perform a gradient preserving histogram matching technique along this axis to match the tone distribution between the two images. We show that this illuminant‐aware strategy gives a better result than directly working with the original source and target image's luminance channel as done by many previous methods. Afterwards, our method performs a full gamut‐based mapping technique rather than processing each channel separately. This guarantees that the colors of our transferred image lie within the target gamut. Our experimental results show that this combined illuminant‐aware and gamut‐based strategy produces more compelling results than previous methods. We detail our approach and demonstrate its effectiveness on a number of examples.     

Crack Growth in Solid Oxide Fuel Cell Materials: From Discrete to Continuum Damage Modeling

This paper addresses the damage and fracture issues of glass and ceramic materials used in solid oxide fuel cells. Analyses of an internal crack and of an interface crack between dissimilar materials were conducted using a modified boundary layer modeling approach. In this approach, fracture is allowed to occur in a small process window situated at an initial crack tip. Elastic displacement crack-tip fields are prescribed as remote boundary conditions. Crack propagation was first modeled discretely. Next, a continuum damage mechanics (CDM) model for brittle materials was developed to capture damage and crack growth in the process window. In particular, the damage model was applied to a glass-ceramic material that had been developed in-house for sealing purposes. Discrete and continuum damage solutions were then compared. Finally, the CDM model was used to determine the crack propagation direction as a function of a mode mixity measure.     

Relationship Between Interfacial Water Layer Adhesion Loss of Silicon/Glass Fiber-Epoxy Systems: A Quantitative Study

Water at the polymer/substrate interface is often the major cause of adhesion loss in coatings, adhesives, and fiber-reinforced polymer composites. This study critically assesses the relationship between the interfacial water layer and the adhesion loss in epoxy/siliceous substrate systems. Both untreated and silane-treated Si substrates and untreated and silane-treated E-glass fibers were used. Thickness of the interfacial water layer was measured on epoxy/Si systems by Fourier transform infrared-multiple total internal reflection (FTIR-MTIR) spectroscopy. Adhesion loss of epoxy/Si systems and epoxy/E-glass fiber composites was measured by peel adhesion and short-beam shear tests, respectively. Little water accumulation at the epoxy/Si substrate interface was observed for silane-treated Si substrates, but about 10 monolayers of water accumulated at the interface between the epoxy and the untreated Si substrate following 100 h of exposure at 24 °C. More than 70% of the initial epoxy/untreated Si system peel strength was lost within 75 h of exposure, compared with 20% loss after 600 h for the silane-treated Si samples. Shear strength loss in composites made with untreated E-glass fiber was nearly twice that of composites fabricated with silane-treated fiber after 6 months of immersion in 60 °C water. Further, the silane-treated composites remained transparent, but the untreated fiber composites became opaque after water exposure. Evidence from FTIR-MTIR spectroscopy, adhesion loss, and visual observation strongly indicated that a water layer at the polymer/substrate interface is mostly responsible for the adhesion loss of epoxy/untreated siliceous substrate systems and epoxy/untreated glass fiber composites and that FTIR-MTIR is a viable technique to reliably and conveniently assess the adhesion loss attributable to water sorption at the interface.     

Utilizing similarity relationships among existing data for high accuracy processing of content-based image retrieval

Retrieving similar images based on its visual content is an important yet difficult problem. We propose in this paper a new method to improve the accuracy of content-based image retrieval systems. Typically, given a query image, existing retrieval methods return a ranked list based on the similarity scores between the query and individual images in the database. Our method goes further by relying on an analysis of the underlying connections among individual images in the database to improve this list. Initially, we consider each image in the database as a query and use an existing baseline method to search for its likely similar images. Then, the database is modeled as a graph where images are nodes and connections among possibly similar images are edges. Next, we introduce an algorithm to split this graph into stronger subgraphs, based on our notion of graph’s strength, so that images in each subgraph are expected to be truly similar to each other. We create for each subgraph a structure called integrated image which contains the visual features of all images in the subgraph. At query time, we compute the similarity scores not only between the query and individual database images but also between the query and the integrated images. The final similarity score of a database image is computed based on both its individual score and the score of the integrated image that it belongs to. This leads effectively to a re-ranking of the retrieved images. We evaluate our method on a common image retrieval benchmark and demonstrate a significant improvement over the traditional bag-of-words retrieval model.     

An improved technique for exfoliating and dispersing nanoclay particles into polymer matrices using supercritical carbon dioxide

An environmentally benign process, which uses supercritical carbon dioxide (sc-CO₂) as a processing aid, is developed in this work to help exfoliate and disperse nanoclay into the polymer matrices. The process relies on rapid expansion of the clay followed by direct injection into the extruder where the mixture is dispersed into the polymer melt. Results from the mechanical properties, rheological studies, and X-ray diffraction (XRD) show that this method represents a significant improvement relative to direct melt blending in single or twin-screw extruders or other methods using sc-CO₂. The greatest mechanical property response was a result of directly injecting pre-mixed sc-CO₂ and nanoclay into the polypropylene melt during extrusion. It was observed that for concentrations as high as 6.6 wt% (limited only by present process capabilities), XRD peaks were eliminated, suggesting a high degree of exfoliation. Mechanical properties such as modulus increased by as much as 54%. The terminal region of the dynamic mechanical spectrum was similar to that of the base polymer, contrary to what is frequently reported in the literature.     

Authentification and identification — Taking the user into account

Username/Password is still the prevailing authentication mechanism for internet based services — but it is not secure! We show how new authentication and identification mechanisms focused on usability and security can change this.