FeO0.7F1.3/C Nanocomposite as a High‐Capacity Cathode Material for Sodium‐Ion Batteries

Searching high capacity cathode materials is one of the most important fields of the research and development of sodium‐ion batteries (SIBs). Here, we report a FeO_0.7F_1.3/C nanocomposite synthesized via a solution process as a new cathode material for SIBs. This material exhibits a high initial discharge capacity of 496 mAh g^?1 in a sodium cell at 50 °C. From the 3^rd to 50^th cycle, the capacity fading is only 0.14% per cycle (from 388 mAh g^?1 at 3^rd the cycle to 360 mAh g^?1 at the 50^th cycle), demonstrating superior cyclability. A high energy density of 650 Wh kg^?1 is obtained at the material level. The reaction mechanism studies of FeO_0.7F_1.3/C with sodium show a hybridized mechanism of both intercalation and conversion reaction.     

Induction of Oxidative Stress and Antioxidative Mechanisms in Arabidopsis thaliana after Uranium Exposure at pH 7.5

To evaluate the environmental impact of uranium (U) contamination, it is important to investigate the effects of U at ecologically relevant conditions. Since U speciation, and hence its toxicity, strongly depends on environmental pH, the present study aimed to investigate dose-dependent effects of U at pH 7.5. Arabidopsis thaliana plants (Mouse-ear Cress) were exposed for three days to different U concentrations at pH 7.5. In the roots, the increased capacities of ascorbate peroxidase and glutathione reductase indicate an important role for the ascorbate-glutathione cycle during U-induced stress. However, a significant decrease in the ascorbate redox state was observed after exposure to 75 and 100 µM U, indicating that those roots are severely stressed. In accordance with the roots, the ascorbate-glutathione cycle plays an important role in the antioxidative defence systems in A. thaliana leaves exposed to U at pH 7.5 as the ascorbate and glutathione biosynthesis were upregulated. In addition, small inductions of enzymes of the antioxidative defence system were observed at lower U concentrations to counteract the U-induced stress. However, at higher U concentrations it seems that the antioxidative defence system of the leaves collapses as reductions in enzyme activities and gene expression levels were observed.     

Production of 2,3-butanediol from diverse saccharides via fermentation

The present study aimed to evaluate the potential use of whey to produce 2,3-BD via the fermentation of lactose and its monosaccharides, glucose and galactose, in a synthetic culture medium (medium 9, M9) using a modified strain of Escherichia coli K12 MG1655 (E. coli JFR12) at a 0.1 L/L (10 vol%) inoculum ratio, 37 °C, atmospheric pressure, an initial pH 7.4, and 100 rpm for 72 h varying the saccharide concentration from 12.5, 25, and 50 g/L. The 2,3-BD yield was ∼80 % of the theoretical yield using 25 g/L of glucose and lactose, corresponding to 0.38 g/g saccharides at a fermentation time of 48 h (glucose) and 72 h (lactose). However, the 2,3-BD yield was halved (0.19 g/g galactose), fermenting 25 g/L of galactose at 48 h. Taking into account these results, two important conclusions were determined: i) E. coli JFR12 could transform galactose into 2,3-BD although its yield was half of the yield observed with glucose at 48 h; and ii) E. coli JFR12 was as efficient as other natural 2,3-BD producers such as Klebsiella species fermenting lactose. However, the E. coli strain has the advantage of being an innocuous strain. To the best of our knowledge, there is no other study presenting the production of 2,3-BD from galactose and lactose with a genetically modified E. coli strain.     

Toward a continuous synthesis of porous carbon xerogel beads

A continuous process for producing porous carbon xerogel beads has been developed. It consists in injecting a pre‐cured aqueous solution of resorcinol and formaldehyde on top of a column filled with hot oleic acid. The latter is pumped on the top of the column and fed at the bottom, generating an upward flow that can be adjusted to match the terminal velocity of the settling beads. Thus, the bead residence time in the column can be adjusted to match the gelation time, allowing the beads to solidify before reaching the bottom of the vessel. The obtained beads are subsequently dried and pyrolyzed. The developed experimental setup proved the continuous synthesis of porous carbon beads is possible. Nevertheless, the shaping process caused various texture changes of the porous carbon, which mainly yields macropores instead of micro and mesopores. This process also leads to the build‐up of a denser skin around the beads. © 2018 American Institute of Chemical Engineers AIChE J, 64: 1049–1058, 2018     

CIGI2011: A heuristic method for resource-constrained project scheduling with activity overlapping

The overlapping of activities is a common practice to accelerate the execution of engineering projects. This technique consists in executing in parallel two activities, normally executed in a sequential way, by allowing the downstream activity to start before the end of the upstream activity based on preliminary information. In this paper, we propose a constructive heuristic for the resource-constrained project scheduling problem with overlapping modes (RCPSP-OM). Given a set of activities to execute, the RCPSP-OM consists in determining the order of execution in time of a set of activities so as to minimize the total project duration, while respecting precedence relations, resource constraints and overlapping possibilities. The heuristic implies that rework tasks related to overlapping are added to downstream activities and that the consumption of the resources is constant throughout the execution of the project (including rework). The method also considers that the possible overlapping modes for every couple of activities and the duration of rework tasks associated with every mode are known in advance. Results show that, when the objective consists in minimizing the project duration, the consideration of the costs associated to activity overlapping allows to significantly reducing the cost of reworks. On the other hand, when the objective consists in maximizing the gains related to the project execution, the search for the best trade-off between acceleration and increase of project costs enables to avoid losses.     

Individual and area socioeconomic inequalities in cause-specific unintentional injury mortality: 11-Year follow-up study of 2.7 million Canadians

This study investigated the association between individual and area socioeconomic status (SES) and leading causes of unintentional injury mortality in Canadian adults. Using the 1991–2001 Canadian Census Mortality Follow-up Study cohort (N = 2,735,152), Cox proportional hazard regression was used to calculate hazard ratios and 95% confidence intervals for all-cause unintentional injury, motor vehicle collision (MVC), fall, poisoning, suffocation, fire/burn, and drowning deaths. Results indicated that associations with SES differed by cause of injury, and were generally more pronounced for males. Low education was associated with an elevated risk of mortality from all-cause unintentional injury and MVC (males only) and poisoning and drowning (both sexes). Low income was strongly associated with most causes of injury mortality, particularly fire/burn and poisoning. Having no occupation or low occupational status was associated with higher risks of all-cause injury, fall, poisoning and suffocation (both sexes) and MVC deaths among men. Associations with area deprivation were weak, and only areas with high deprivation had elevated risk of all-cause injury, MVC (males only), poisoning and drowning (both sexes). This study reveals the importance of examining SES differentials by cause of death from a multilevel perspective. Future research is needed to clarify the mechanisms underlying these differences to implement equity-oriented approaches for reducing differential exposures, vulnerability or consequences of injury mortality.     

Gut Microbial Metabolites of Polyunsaturated Fatty Acids Correlate with Specific Fecal Bacteria and Serum Markers of Metabolic Syndrome in Obese Women

The aim of this human study was to assess the influence of prebiotic-induced gut microbiota modulation on PUFA-derived bacterial metabolites production. Therefore, we analyzed the circulating fatty acid profile including CLA/CLnA in obese women treated during 3 months with inulin-type fructan prebiotics. In these patients, we had already determined gut microbiota composition by phylogenetic microarray and qPCR analysis of 16S rDNA. Some PUFA-derived bacterial metabolites were detected in the serum of obese patients. Despite the prebiotic-induced modulation of gut microbiota, including changes in CLA/CLnA-producing bacteria, the treatment did not impact significantly on the circulating level of these metabolites. However, some PUFA-derived bacterial metabolites were positively correlated with specific fecal bacteria (Bifidobacterium spp., Eubacterium ventriosum and Lactobacillus spp.) and inversely correlated with serum cholesterol (total, LDL, HDL). These correlations suggest a potential beneficial effect of some of these metabolites but this remains to be confirmed by further investigation.     

Modeling heterogeneous photocatalytic inactivation of E. coli using suspended and immobilized TiO2 reactors

A study was carried out to develop a kinetic model of the photocatalytic inactivation of Escherichia coli using different TiO₂ catalysts. The model developed is based on a reaction scheme that involves effectively coupling mass‐transfer fluxes between bacteria and catalyst surface on one hand and bacterial degradation reaction on the other. The photocatalytic results were derived from experiments led in a batch reactor under both dark and Ultra Violet (UV) irradiation conditions. Using a reference catalyst, the robustness of the developed model was tested under solar conditions. The experimental data validated the model as successfully able to reproduce evolutions in the viable bacteria concentration in the range of parameters studied without any further adjustment of the kinetic parameters. The model was used to simulate the bacterial degradation kinetics under different working conditions to describe the partitioning of both bacterial adhesion and photocatalytic reaction in the solution to be treated © 2015 American Institute of Chemical Engineers AIChE J, 61: 2532–2542, 2015     

Processing–formulation–performance relationships of polypropylene/short flax fiber composites

This work is a comprehensive study of the effect of extrusion process parameters and formulation on the properties of polypropylene (PP)/short flax fiber composites. The parameters that were varied during the twin‐screw extrusion process were screw configuration, revolutions per minute (rpm), extrusion temperature, and flow rate. The effect of the feeding zone location of cellulosic fiber was also considered. This study investigates the effect of the formulation, cellulosic fiber content, the presence of a coupling agent, and of a reactive additive on composite performance. The composites were characterized in terms of morphology and microstructure, fiber length, rheological, thermal, and mechanical properties. Sensibility to humidity and recyclability were also considered. When compared with as‐received PP, the tensile strength of injection‐molded parts increased with cellulosic content by up to 40 vol %, and the tensile modulus increased 3.5 times when a combination of coupling and reactive agents was used. Exposed to controlled humidity of 50% during 1 year, these composites exhibited a very low level of humidity uptake around 0.85 wt %. The processability of these materials using a cast film line and the mechanical properties of extruded sheets are also presented. Furthermore, these materials demonstrate a good recyclability using injection molding by keeping the integrality of their mechanical properties after five reprocessing cycles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41528.