Biodegradation of pollutants in the effluents of food industry enterprises

The article has investigated the processes of obtaining biogas by means of anaerobic fermentation of the effluents of food production in periodic and continuous modes with their subsequent add-on treatment by the method of aerobic fermentation.     

High-Performance Liquid Chromatography Method for the Monitoring of the <Emphasis Type="Italic">Allium</Emphasis> Derivative Propyl Propane Thiosulfonate Used as Natural Additive in Animal Feed

A new simple analytical method for monitoring propyl propane thiosulfonate (PTSO) in animal feed is presented. PTSO is an active ingredient from Allium spp. (like onion and shallot), proposed as a natural additive for feed being an efficient alternative to antibiotics used as growth promoter due to its efficiency improving animal health. Reversed-phase liquid chromatography with UV detection has been used and a previous sample treatment based on solid-liquid extraction has been developed and optimized in order to extract PTSO from a feed for laying hens using acetone as extraction solvent. The method has been characterized obtaining limits of detection and quantification of 11.2 and 37.3 mg kg^?1, respectively, which are lower than the concentrations expected in samples containing this additive. The intra- and interday relative standard deviations (RSDs) were lower than 8.3 % in all the cases, and recoveries varied from 90.2 to 94.6 %. Finally, in order to check the unequivocal identification of PTSO, mass spectrometry detection was applied. The proposed method is a simple procedure for monitoring PTSO in commercial feed, being possible to implement it in routine laboratories for quantification purposes and stability studies of the distributed products.     

Surface texture of the milled surface of aluminum-ceramic composite

Journal of Mechanical Science and Technology - The work concerns the assessment of the parameters of the geometric structure of the surface of an aluminum-ceramic composite after milling in various...     

Effect of AMC on fixed‐rate traffic with hard delay constraints in mobile broadband systems

The adaptive modulation and coding (AMC) technique, which has been adopted by advanced mobile telecommunication systems, supports a flexible response to the random radio behaviour. As a result, the attained transmission rate over a wireless link is time varying. Hence, resource demands are not deterministic but fluctuating even for calls with constant bit rate service requirements. Consequently, constant bit rate calls are susceptible to a forced call termination because of insufficient resources not only in a target cell during inter‐cell handoffs but also in a serving cell during radio link deterioration. Furthermore, call blocking and dropping probabilities depend on radio propagation conditions among other factors and therefore they are dissimilar throughout a service area. The latter leads to unfairness problems. We analytically measure the impact of AMC on fixed‐rate service with hard delay constraints such as voice for different signal, mobility and traffic conditions. We consider a reference case (call requests are admitted into the system provided there are enough free resources) and two classes of admission control approaches: traditional (only inter‐cell handoffs are prioritised) and modified (all ongoing calls are prioritised). The reported results reveal conditions for which AMC affects voice call performance and can serve as guidelines on admission control design. Copyright © 2013 John Wiley & Sons, Ltd.     

Obtaining and Studying Films of Tungsten,Titanium and Their Oxides

Glass Physics and Chemistry - The initial polycrystalline films of tungsten and titanium, whose surface has predominantly ultrananodispersed morphology and a thickness of 50 to 100 nm, are obtained...     

Characterization of CVD Bonded Tyranno® Fibers Oxidized at High Temperatures

The oxidation of highly porous ceramic matrix composites (PCMCs) based on different Tyranno^® fibers has been analyzed by means of thermogravimetry and electron microscopy. Both uncoated fibers and PCMC materials exhibit parabolic kinetics between 900°C and 1250°C, these being faster for Ti‐doped than for Zr‐doped Tyranno fibers. Oxide layers in Ti‐doped fibers are porous and partially crystalline, whereas in Zr‐doped materials a significant fraction of relatively coarse β‐SiC grains is still found embedded in the amorphous silica matrix. On the other hand, the CVD‐SiC coatings exhibit higher oxidation rates from the outer surface than from the inner one, a phenomenon that has been associated not only with the more difficult access of oxygen to the inner face but also with the highly <111>  textured structure of these coatings, for which very different oxidation rates have been published for the inward and outward directions. Cracking phenomena observed above 1100°C for long dwelling times do not lead to an acceleration of the oxidation process, which could be due to the simultaneous crystallization of the amorphous silica layers.     

Identification,Synthesis, and Behavioral Activity of 5,11-Dimethylpentacosane,A Novel Sex Pheromone Component of the Greater Wax Moth,Galleria Mellonella (L.)

The greater wax moth, Galleria mellonella (L.), is a serious and widespread pest of the honeybee, Apis mellifera L. In contrast to most moths, for which long-range mate finding is mediated by female-produced sex pheromones, G. mellonella males attract conspecific females over long distances by emitting large amounts of a characteristic scent in combination with bursts of ultrasonic calls. The male scent for this species was previously identified as a blend of nonanal and undecanal. When these compounds were bioassayed, characteristic short-range sexual behavior, including wing fanning, was triggered in conspecific females, but the aldehyde blend failed to elicit attraction over longer distances. We identified, via analysis and synthesis, a third male-specific compound, 5,11-dimethylpentacosane. We show that it acts as a behavioral synergist to the aldehydes. In wind tunnel experiments, very few female moths responded to the aldehyde blend or to 5,11-dimethylpentacosane tested separately, but consistently showed orientation and source contact when a combination of all three compounds was applied. The level of attraction to the three-component mixture was still lower than that to male extract, indicating that the composition of compounds in the synthetic blend is suboptimal, or that additional pheromone components of G. mellonella are yet to be identified. The identification of 5,11-dimethylpentacosane is an important step for the development of an efficient long-range attractant that will be integrated with other environmentally safe strategies to reduce damage to beehives caused by wax moths.     

Physical and Functional Properties of Blackberry Freeze- and Spray-Dried Powders

The aim of the present work was to develop two products from blackberry juice by freeze and spray drying with potential use as food colorants or healthy ingredients. A characterization of the physical and functional properties of the powdered juices was done. Maltodextrin or a mixture of trehalose and maltodextrin were assessed as carrier matrices. Freeze-dried, maltodextrin-containing powders presented the best retention of bioactive compounds and antiradical activity; however, they showed a narrow relative humidity range for storage in the glassy state. Spray-dried powders showed better physical properties, bearing higher glass transition temperature and lower molecular mobility than freeze-dried formulations.     

Design of Porous Alginate Hydrogels by Sacrificial CaCO3 Templates: Pore Formation Mechanism

Fabrication of porous alginate hydrogels with a well‐controlled architecture useful for tissue engineering is still a challenge. Here, CaCO₃‐based templating is utilized to design stable alginate gels with controlled pore dimensions in the range of 5–50 μm. The mechanism of pore formation is studied considering two factors affecting the pore size: i) osmotic pressure generated during the dissolution of sacrificial CaCO₃ templates and ii) alginate gel network density. Osmotic pressure can achieve an upper limit of 100 MPa but does not affect the gel porosity. Additional osmotic pressure (range of kPa) induced by dextrans pre‐encapsulated into CaCO₃ vaterite is also insufficient for pore enlargement. Pore stability depends merely on the gel network density and on the number of crosslinking calcium ions provided locally per unit time; pores are collapsed when template dissolution is too slow or if there is insufficient alginate concentration (below 2%). Young's modulus indicates the soft nature of the prepared hydrogels (tens of kPa) applicable as soft porous scaffolds with a tuned internal structure.     

Sterically Hindered Quaternary Phosphonium Salts (QPSs): Antimicrobial Activity and Hemolytic and Cytotoxic Properties

Structure–activity relationships are important for the design of biocides and sanitizers. During the spread of resistant strains of pathogenic microbes, insights into the correlation between structure and activity become especially significant. The most commonly used biocides are nitrogen-containing compounds; the phosphorus-containing ones have been studied to a lesser extent. In the present study, a broad range of sterically hindered quaternary phosphonium salts (QPSs) based on tri-tert-butylphosphine was tested for their activity against Gram-positive (Staphylococcus aureus, Bacillus cereus, Enterococcus faecalis) and Gram-negative (Escherichia coli, Pseudomonas aeruginosa) bacteria and fungi (Candida albicans, Trichophyton mentagrophytes var. gypseum). The cation structure was confirmed to determine their biological activity. A number of QPSs not only exhibit high activity against both Gram-positive and -negative bacteria but also possess antifungal properties. Additionally, the hemolytic and cytotoxic properties of QPSs were determined using blood and a normal liver cell line, respectively. The results show that tri-tert-butyl(n-dodecyl)phosphonium and tri-tert-butyl(n-tridecyl)phosphonium bromides exhibit both low cytotoxicity against normal human cells and high antimicrobial activity against bacteria, including methicillin-resistant strains S. aureus (MRSA). The mechanism of QPS action on microbes is discussed. Due to their high selectivity for pathogens, sterically hindered QPSs could serve as effective tunable biocides.