基于神经网络的雷达辐射源体制和用途智能识别

本文描述一种采用BP神经网络对雷达辐射源体制和用途进行智能识别的方法 ,包括理论分析、神经网络结构设计、推理和学习算法设计、编程算法设计、实验结果比较与分析等。实验表明 ,该方法有着良好的识别效果     

(Nb,Ti)C的制备方法对(Nb,Ti)C-35Ni金属陶瓷的微观结构及性能的影响

用自蔓燃高温合成（SHS）技术及电弧熔融法制备的（Nb，Ti）C固溶体作基体，制备（Nb，Ti）C－35Ni金属陶瓷。结果表明用电弧熔融法制备的（Nb，Ti）C为基的试样具较优的室温力学性能（σ＝1630MPa，KIC＝18．0MPa），其陶瓷颗粒均匀分行粘结相之中并是包裹结构；而用SHS法制备的（Nb，Ti）C为基的试样其力学性能相对较差，其陶瓷颗粒无包裹结构．     

MIMO系统中的分组全分集全码率空时编码

针对未编码的多输入多输出（MIMO，Multi—Input Multi—Output）系统，提出一种复杂度适中的分组全分集全码率（GFDFR，Group—wise Full Diversity Full Rate）空时编码方案。该方案通过在发送端进行天线分组，各组独立编码，减小全分集全码率（FDFR，Full Diversity Full Rate）编码块的大小从而降低系统编解码复杂度；在频率选择性信道中，进一步对子载波分组进行独立编码，获得频率分集（或多径分集），以适中的复杂度在不降低系统分集度的情况下保证了信息的全码率传输，是一种在MIMO信道中极具实用价值的空时编码方案。     

自动控制原理考试系统的设计与实现

对基于Visual Basic 6．0开发的自动控制原理考试系统的系统结构做了阐述，并简要介绍了该系统的设计思想、主要功能及实现方法。     

Electromagnetic properties of ferroelectric-ferrite ceramic composites

The NiFe₂O₄ and Pb(Zr_0.52Ti_0.48)O₃ ceramic composites are prepared by conventional solid state reaction method. The microstructural and morphological properties of the composites are studied by X-ray diffraction analysis and scanning electron microscopy. Results indicate that the ferrite and piezoelectric phases can co-exist in the composites. The relationship between the dielectric constant and frequency (40 Hz–40 MHz) as well as temperature is also investigated. It is noted that the transition temperature of the composites is about 380 °C. A double electric hysteresis loop is observed in our composites. The magnetic properties are relatively weak according to the magnetic hysteresis loop. With increase in the content of the ferrite phase, the permeability increases. The electromagnetic properties of the as-prepared composites are tunable according to the content of the NiFe₂O₄ phase.     

天然气管道燃压机组的性能试验及见证

结合西气东输管道工程燃气轮机驱动压缩机组设备订货及验收中对性能试验项目的确定、工厂试验及见证过程,介绍了燃压机组性能试验项目所涉及的主要内容、执行标准、需要达到的技术指标,各种性能试验的基本情况,买方参加工厂试验见证中需要重点处理好的问题等。以期为我国其他大型长输天然气管道机组订货及试验见证工作提供借鉴。     

谈建筑石材

石材是一种有着巨大耐久性的材料，岩石通常被分为三类：火成岩，沉积岩，变质岩。工业革命的巨大影响为石材这种古老的建筑材料带来了新生。如果说工业革命给石材使用所带来的改变是物质上的，那么现代主义运动给石材带来的影响就是精神上的。     

Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities

The synthesis of a p‐toluidine/formaldehyde (PTF) resin was performed, and the effects of the molar ratio of the individual monomers and the polymerization conditions on the structure of the PTF resin were studied. Fourier transform infrared and ¹³C‐NMR spectra were used to characterize the PTF. Wide‐angle X‐ray diffraction patterns revealed the crystalline structures of various PTFs. Polarized optical microscopy revealed that the molar ratio of the monomers had a strong effect on the crystalline morphologies. A longer polymerization time turned out a polymer with a higher intrinsic viscosity and molecular weight, which led to differences in the proton conductivity. All of the PTFs showed a higher proton conductivity than a commercial Nafion membrane at 90–100°C and 0% relative humidity. The proton conductivity of the PTF series could be improved by sulfonation with sulfuric acid and could be maintained after blending with polyurethane. Pure methanol could be used as a fuel source because of the insolubility and nonwetting properties of PTF in methanol to increase the output current density for a PTF membrane electrode assembly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

聚脲基脂及其在电机轴承上的应用

对电机轴承专用聚脲基脂的特点及其在电机轴承上的应用效果进行了分析和探讨。正确使用电机用润滑脂是保证电机正常工作，减少电机故障的关键措施之一。采用电机专用聚脲基脂后，电机轴承工作温度明显下降，电机故障率明显减少。