我国氢能产业发展和氢资源探讨

分析了我国氢能产业近期发展情况,我国氢能产业正步入快速发展机遇期。指出氢能是21世纪最具发展潜力的一种清洁二次能源,具有"清洁、高效、安全、可持续"四大特点,被誉为未来世界能源架构的核心。重点讨论了我国氢资源和绿色氢气制备问题,指出目前实际使用的氢气包括"灰氢""蓝氢"和"绿氢"三大类,显然"灰氢"不可取,"蓝氢"可以用,"废氢"可回收,"绿氢"是方向。讨论了加快氢能系统建设,建立发展氢气存储和运输系统及加氢站基础设施建设等问题。未来,我国氢能产业发展潜力巨大,但是在下决心大力发展氢能产业时,需要高度注意目前存在的实际情况和困难,要防范一系列的产业风险,做到有序发展,稳中有进,才能实施氢能产业的可持续发展。     

电泵井振动监测及传输系统设计

潜油电泵机组是具有超细长转轴的复杂旋转机械,有复杂的生产及安装工艺,且采用了多级离心泵,在生产过程中会产生强大的振动源,测量并分析机组振动状况,是评估潜油电泵机组的运行状况、提高可靠性的重要手段。本文采用MMA3201振动加速度计监测振动状况,并采用4 mA²0 mA电流环将信号传输到井上MCU进行分析处理,根据监测和处理结果,适时提泵检修,采取合理的减振措施,延长潜油电泵的使用寿命。     

循环经济与浮法玻璃工艺的发展

在玻璃行业贯彻循环经济的理念,改进工艺思想和方法,节约资源,降低消耗,提高资源利用率,减少污染物排放,是我们对后人应负的责任和对地球应尽的义务。     

LC2294处理器片内A／D转换器测试

介绍了通过对 LC2294处理器片内 A /D 转换器测试,构建简单可靠,通用性好的自动测试系统,提出了一种软硬件结合的 A /D 测试方法,给出了测试系统原理图,并详细描述了软件实现过程。     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

Trusted Integrated Circuits: The Problem and Challenges

Hardware security has become more and more important in current information security architecture. Recently collected reports have shown that there may have been considerable hardware attacks prepared for possible military usage from all over the world. Due to the intrinsic difference from software security, hardware security has some special features and challenges. In order to guarantee hardware security, academia has proposed the concept of trusted integrated circuits, which aims at a secure circulation of IC design, manufacture and chip using. This paper reviews the main problems of trusted integrated circuits, and concludes four key domains of the trusted IC, namely the trusted IC design, trusted manufacture, trusted IP protection, and trusted chip authentication. The main challenges in those domains are also analyzed based on the current known techniques. Finally, the main limitations of the current techniques and possible future trends are discussed.     

基于需求更新的救灾品配送公平与效率协调模型

鉴于需求准确度与救灾品配送效率之间的悖反关系,研究了基于需求更新的救灾品配送效率与公平问题.通过对某市民政局进行调研,了解到台风灾害发生时的需求变化规律,设计一种通过已知需求灾区对未知需求灾区的需求进行贝叶斯更新的需求更新方式,由此建立救灾品配送模型.将该模型应用于某台风救灾实例,通过实例分析表明了该模型的求解速率与精度,并找到了最优"决策点",实现了救灾品配送公平与效率的平衡.     

用于光刻系统仿真的多边形处理算法

为提高光刻仿真效率,通过对光刻原理进行研究,提出了2种多边形处理算法,将掩模上的多边形图案进行切分优化,将其划分成若干矩形或三角形。在Linux环境下应用C语言设计出一个完整的光刻仿真系统,设计的具体光学参数为:光源波长为193nm,数值孔径为0.3~0.8,部分相干系数可调范围为0.2~0.8,可一次性仿真1μm×1μm到10μm×10μm范围内的45 nm~0.18μm工艺的复杂版图,并通过多次实验进行验证。实验结果表明:原版图图像的边缘细节得到保留,且该算法有效地减少了光刻模拟的计算复杂度与计算时间,整体效率提升20%以上,为当前智能传感器系统芯片的制造节省了宝贵时间。     

粉煤灰物理序参量的系统化

近年来,作者等通过系列的粉煤灰特征化和系统化基础研究,形成了粉煤灰物理序参量系统。这个系统的实用性是能够提供大量有序信息,故称之为“脉搏系统”。本文介绍了粉煤灰物理序参量系统的构建。此系列的应用有助于粉煤灰资源开发及有利于粉煤灰质量从无序状态到相对稳定和有序状态的发展。     

Graft copolymerization of styrene and acrylonitrile onto EPDM

Acrylonitrile–EPDM–styrene (AES) graft copolymers were synthesized by solution graft polymerization of styrene (St) and acrylonitrile (AN) onto EPDM in an n‐hexane/benzene solvent with benzoyl peroxide (BPO) as an initiator. The structure changes were studied by an FTIR spectrophotometer. The grafting parameters were calculated gravimetrically. The influence of the polymerization conditions, such as the reaction time, concentration of the initiator, EPDM content, and weight ratio of St/AN, on the structure of the products was investigated. It was found that a proper initiator concentration and EPDM content will give a high grafting ratio of the AES resin. The thermal property of the copolymer was studied using programmed thermogravimetric analysis (TGA). The results showed that the copolymer has a better heat‐resistant property than that of ABS, especially for the initial decomposition temperature (T_in) and the maximum weight loss rate temperature (T_max). Also, the mechanism of the graft reaction was discussed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 428–432, 2002