Study on nonpremixed methane/air combustion from flame structure and NOX emission aspect for different burner head structures

In the present study, the air turbulator, which is a part of a nonpremixed burner, is investigated numerically in terms of its effects on the diffusion methane flame structure and NO_X emissions. A computational fluid dynamics (CFD) code was used for the numerical analysis. At first, four experiments were conducted using natural gas fuel. In the experimental studies, the excess air ratio was taken constant as 1.2, while the fuel consumption rate was changed between 22 and 51 Nm³/h. After the experimental studies, the CFD studies were carried out. Pure methane was taken as fuel for the simulations. The nonpremixed combustion model with the steady laminar flamelet model (SFM) approach was used in the combustion analyses. Methane‐air extinction mechanism with 17 species and 58 reactions was used for the simulations. The results obtained from the CFD studies were confronted with the measurements of the flue gas emissions in the experimental studies. Then, a modified burner head was analysed numerically for the different air turbulator blade numbers and angles. The CFD results show that increasing the air turbulator blade number and angle causes the thermal NO emissions to be reduced in the flue gas by making the flame in the combustion chamber more uniform than the original case. This new flame structure provides better mixing of the fuel and combustion air. Thus, the diffusion flame structure in the combustion chamber takes the form of the partially premixed flame structure. The maximum reduction in the thermal NO emissions in the flue gas is achieved at 38% according to the original case.     

Maximization of heat transfer density rate from a single row of rhombic tubes cooled by forced convection based on constructal design

The heat transfer density rate from a row of rhombic tubes cooled by forced convection is maximized based on constructal design. A row of parallel rhombic tubes are placed in a fixed volume, the horizontal axis of the tubes is kept constant while the vertical axis of the tubes and the spacing between the tubes are changed to facilitate the heat flow from the tubes to the coolant. The tubes are kept at constant temperature and the incoming free‐stream flow is induced by constant pressure drop. For steady, two‐dimensional, incompressible, and laminar forced convection, the governing equations are solved numerically by finite volume method with SIMPLE algorithm. The dimensionless pressure drop (Bejan number, Be) ranging from 10 ³ to 10 ⁵, the range of the vertical axis of the tube is 0.2 ≤ B ≤ 2, and the working fluid is air ( Pr = 0.71). The results show that the optimal spacing decreases and the maximum heat transfer density increases as the Bejan number increases for all vertical axes of the tube. Bejan number and the bluntness of the tube have a significant effect of the flow structure (separation and vortex formation) around the tubes at the optimal spacings.     

Maximization of heat transfer density from a vertical array of flat tubes in cross flow under fixed pressure drop using constructal design

The density of heat transfer rate from a vertical array of flat tubes in cross flow is maximized under fixed pressure drop using constructal design. With the constructal design, the tube arrangement is found such that the heat currents from the tubes to the coolant flow easily. The constraint in the present constructal design is the volume where the tubes are arranged inside it. The two degrees of freedom available inside the volume are the tube‐to‐tube spacing and the length of the flat part of the tubes (tube flatness). The tubes are heated with constant surface temperature. The equations of continuity, momentums, and energy for steady, two‐dimensional, and laminar forced convection are solved by means of a finite‐volume method. The ranges of the present study are Bejan number (dimensionless pressure drop) (10³ ≤ Be ≤ 10⁵) and tube flatness (dimensionless length of the tube flat part) (0 ≤ F ≤ 0.8). The coolant used is air with Prandtl number (Pr = 0.72). The results reveal that the maximum heat transfer density decreases when the tube flatness decreases at constant Bejan number. At constant tube flatness, the heat transfer density increases as the dimensionless pressure drop (Bejan number) increases. Also, the optimal tube‐to‐tube spacing is constant, irrespective of the tube flatness at constant Bejan number.     

Evaluation of the potential use of discard species for fish silage and assessment of its oils for human consumption

Waste or by-products contains a substantial amount of nutrients. Fish silage is an alternative way for assessment of fish discards and waste generated in the fish processing industries. The aim of the study was to evaluate the potential use of discard species (Equulites klunzingeri, marine fish and Carassius gibelio, freshwater fish) for fish silage and chemical quality of fish oil extracted from fish silages prepared with acid and fermented methods. Lipid quality of fish oils extracted from fish silages with LAB strains was evaluated in terms of thiobarbituric acid (TBA), peroxide value (PV), p-Anisidine (AV), totox values and fatty acid composition. The results showed that PV, TBA, AV and totox values of all extracted fish oils were within the acceptable limits for edible oils. Recovered fish oils from silage contained high level of polyunsaturated fatty acids (PUFAs), especially eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), serving as a source of good quality fish oil for human consumption.     

SER and throughput analysis of space–time analog network coded relaying system over shadowed Rician fading channels

Wireless Networks - This research article presents an innovative approach based on analog network coding (ANC) in conjunction with space time block coding (STBC) which is termed as space time...     

A Novel Speech Enhancement Method Using Fourier Series Decomposition and Spectral Subtraction for Robust Speaker Identification

Wireless Personal Communications - This paper presents a novel speech enhancement approach by combining Fourier series expansion and spectral subtraction. This approach is implemented in speaker...     

A protein which masks galactose receptor mediated phage susceptibility in Lactococcus lactis subsp. lactis MPL56

A 28.5-kb plasmid, isolated from Lactococcus lactis subsp. lactis MPL56, causes complete inhibition of four lactococcal phages. Cell wall characteristics of wild-type strain MPL56 were compared with its 28.5 kb plasmid-cured, phage-sensitive derivative MPL56-22. After proteolytic enzyme treatments, adsorption of phages occurred at high levels, an example is 94.6–98.5% in MPL56 cells. Analysis of cell wall extracts of MPL56-22 by sodium dodecyl sulphate–polyacrylamide gel electrophoresis (SDS–PAGE) indicated that the only difference between strains was the 55.4 kDa band in protein patterns of MPL56. Adsorption of the four phages was completely inhibited when MPL56-22 cells were subjected to SDS, Triton-X-100, HCl and NaOH treatments. Lectins that were specific for glucose/mannose and N-acetylglucosamine did not prevent adsorption of phages in cell wall extracts of MPL 56-22. However a lectin specific for galactose (MCA; Momordica charantia ) completely inhibited adsorption of these phages in cell wall extracts of MPL56-22. HPLC patterns of cell wall carbohydrates of MPL56-22 and its HCl treated preparations showed that the most prevalent difference was the galactose on untreated MPL56-22 cell wall chromatograms.