Cylindrical functionally graded shell model based on the first order shear deformation nonlocal strain gradient elasticity theory

Microsystem Technologies - In this article, a cylindrical functionally graded shell model is developed in the framework of nonlocal strain gradient theory for the first time. For this purpose, the...     

A multi-objective decision approach for optimal augmentation and expansion of transmission network

In this paper, the authors propose a new multi-objective decision making approach for optimal augmentation and expansion of transmission network. Fundamental elements of the proposed approach are value of reliability and electricity market. Investment Cost (IC), Total Congestion Cost (TCOC) and Social Welfare (SW) and also Average Load Interruption Cost (ALIC) are the four objectives considered in the optimization, while short-term and long-term constraints, are modeled as constraints. The proposed model is one of complicated non-convex optimization problem having a nonlinear, mixed-integer nature. Therefore, a new and robust hybrid Improved Harmony Search Algorithm (IHSA) and Quadratic Programming (QP) is used and followed by a Fuzzy Satisfying Method (FSM) to determine the final optimal solution. The feasibility and capabilities of the proposed approach are tested on the 6-machine 8-bus test system. The detailed results of the case studies are presented and thoroughly analyzed. The obtained results illustrate the sufficiency and profitableness of the newly developed method in augmentation and expansion of transmission network when, compared with other methods.     

Hot Corrosion Behavior and Microstructural Change of Al-Gradient CoNiCrAlYSi Coatings, Produced by LVPS and Diffusional Processes

Conventional and gradient CoNiCrAlYSi coatings were produced by using low vacuum plasma spray and an additional step of diffusional over aluminizing (pack cementation) techniques on an Inconel-738 substrate. Hot corrosion of these coatings was investigated using Na₂SO₄–20wt%NaVO₃ molten salt at 880?°C for 800?h. Hot corrosion rate was determined by measuring the weight gain of the specimens at regular intervals for a duration of 20?h. X-ray diffraction, field emission scanning electron microscopy and electron probe micro analysis techniques were used to determine the nature of phases, investigation of the thermally grown oxide, examination of the surface attack and determination of the elemental distribution. The gradient coating showed better performance by re-healing alumina scale due to its possession of more β phase as Al reservoir. Results indicated that pack cementation process caused an increase in amount of aluminum-rich β phase and better hot corrosion properties of gradient coatings owing to the Al enrichment in the outer layer and rapid formation of protective oxide on the surface.     

Improving the mechanical,thermal and electrical properties of polyurethane- graphene oxide nanocomposites synthesized by in-situ polymerization of ester-based polyol with hexamethylene diisocyanate

Many polyols or diols have been used for the synthesis of polyurethanes (PU), however, to the best of our knowledge, PU-graphene oxide (GO) nanocomposites synthesized with ester-based polyols have been rarely studied. In this work ester-based polyol synthesized by the reaction of adipic acid and 1,4 butane diol, was in-situ polymerized with hexamethylene diisocyanate (HDI) and GO to prepare PU-GO nanocomposites. The content of GO was changed from 1 to 2.5 wt% and its effect on the mechanical, thermal and electrical properties of the samples were examined. The presence of GO more than 1.5% in the nanocomposites resulted in brittle samples and reduced the tensile strength, however, the Young’s modulus of the samples containing 1 and 1.5% was increased to 11 and 12.08-fold (275 and 302 MPa) compared to the neat PU (25 MPa), respectively. The shore A hardness of the samples was increased from 86 for PU to 96 for PUGO-1.5. The abrasion resistance of the samples was decreased by increasing the GO content. Results of the thermogravimetric analysis showed that higher amounts of GO increase the thermal stability of the samples. The chemical and physical interactions between the surface of GO nanolayers and the PU chains were confirmed by FTIR spectroscopy. The dynamic mechanical analysis of the samples showed that GO nanolayers decreased the molecular motions of the PU chains in the nanocomposites which were noticed by shifting the glass transition to the higher temperatures.     

Voronoi based discrete least squares meshless method for heat conduction simulation in highly irregular geometries

A new technique is used in Discrete Least Square Meshfree(DLSM) method to remove the common existing deficiencies of meshfree methods in handling of the problems containing cracks or concave boundaries. An enhanced Discrete Least Squares Meshless method named as VDLSM(Voronoi based Discrete Least Squares Meshless) is developed in order to solve the steady-state heat conduction problem in irregular solid domains including concave boundaries or cracks. Existing meshless methods cannot estimate precisely the required unknowns in the vicinity of the above mentioned boundaries. Conducted researches are limited to domains with regular convex boundaries. To this end, the advantages of the Voronoi tessellation algorithm are implemented. The support domains of the sampling points are determined using a Voronoi tessellation algorithm. For the weight functions, a cubic spline polynomial is used based on a normalized distance variable which can provide a high degree of smoothness near those mentioned above discontinuities. Finally, Moving Least Squares(MLS) shape functions are constructed using a varitional method. This straight-forward scheme can properly estimate the unknowns(in this particular study, the temperatures at the nodal points) near and on the crack faces, crack tip or concave boundaries without need to extra backward corrective procedures, i.e. the iterative calculations for modifying the shape functions of the nodes located near or on these types of the complex boundaries. The accuracy and efficiency of the presented method are investigated by analyzing four particular examples. Obtained results from VDLSM are compared with the available analytical results or with the results of the well-known Finite Elements Method(FEM) when an analytical solution is not available. By comparisons, it is revealed that the proposed technique gives high accuracy for the solution of the steady-state heat conduction problems within cracked domains or domains with concave boundaries and at the same time possesses a high convergence rate which its accuracy is not sensitive to the arrangement of the nodal points. The novelty of this paper is the use of Voronoi concept in determining the weight functions used in the formulation of the MLS type shape functions.     

Physical and Morphological Properties of Combined Treated Wood Polymer Composites by Maleic Anhydride and Methyl Methacrylate

Wood polymer composites were prepared by consecutive impregnation with maleic anhydride (MAN) and methyl methacrylate (MMA). Samples impregnated with MAN alone, were heated at 120°C and 150°C for 4 and 8 h. Based on the Fourier transform infrared (FT-IR) analysis and soaking-drying test results, treatment with MAN at 150°C for 4 h resulted in formation of stable crosslinks. In the second stage, MMA was used for in situ polymerization within MAN-treated wood. Field emission scanning electron microscopy observation and FT-IR analysis indicated that MMA copolymerized with MAN, and the resultant polymer filled up the lumen and is also grafted on to the cell wall. Improvement of water repellency and dimensional stability were observed in the treated samples, particularly in combined treated samples. The MAN/MMA treatment improved interaction between polymer and wood.