The experimental and numerical impacts of geometrical parameters of conical shock tube on the function,maximum pressure and generative impulses to expose equivalent mass and behavioral equation

One of the methods to investigate the phenomenon of explosion underwater and its impact on the structures is to use the conical shock tube. These tubes produce a lot of pressure using a tiny explosive charge. In this essay, the geometry of the established/manufactured explosive shock tube is demonstrated first and the results of the experiments operating the tube is presented. Then, the explosion of a given amount of explosive charge in the conical shock tube is studied by benefiting the LS‐DYNA code. The numerical simulation is done by Lagrange‐Oiler selected multi‐materials solutions. To ensure the authenticity of the selected method in the software, the results of the stimulated model is compared with the experimental outcomes accordingly, after accrediting the accuracy of the results, the stimulating and scrutinizing the effects of geometrical parameters on the function of explosive shock tubes is proceeded. In this research, the effect of the cone head angel on the produced pressure inside the shock tube is analyzed first. Then, the function of shock tubes with different lengths is checked. Moreover, after changing the scale of the explosive charge and studying the outcome, stating the reasons for changes in each parameter and examining the effect of the relation between the explosive proportion and the water volume inside the shock tube, an equation for the equivalent mass for all sock tubes with different angels is exhibited and the existing theoretical relation is revised. Finally, by examining the pressure and impulses changes in different intervals, an equation is presented to anticipate the pressure and impulses in different shock tubes.     

Factored Edge-Valued Binary Decision Diagrams

Factored Edge-Valued Binary Decision Diagrams form an extension to Edge-Valued Binary Decision Diagrams. By associating both an additive and a multiplicative weight with the edges, FEVBDDs can be used to represent a wider range of functions concisely. As a result, the computational complexity for certain operations can be significantly reduced compared to EVBDDs. Additionally, the introduction of multiplicative edge weights allows us to directly represent the so-called complement edges which are used in OBDDs, thus providing a one to one mapping of all OBDDs to FEVBDDs. Applications such as integer linear programming and logic verification that have been proposed for EVBDDs also benefit from the extension. We also present a complete matrix package based on FEVBDDs and apply the package to the problem of solving the Chapman-Kolmogorov equations.     

Preparation of polypropylene‐based nanocomposites using nanosized MCM‐41 as support and in situ polymerization

MCM‐41 nanoparticles were used for preparing nanocomposites through the in situ polymerization of propylene. The performance of the catalytic system and the final properties of the materials obtained are highly dependent on the methodology used for impregnation of the catalyst onto the support particles, and therefore an optimization study for the impregnation methodology of the catalyst (Me₂Si(Ind)₂ZrCl₂) was carried out. Two different methodologies were used; the results in terms of catalytic activity and polymer molecular masses indicated that the most promising one involved the pre‐activation of the catalyst with the cocatalyst, methylaluminoxane, followed by impregnation onto the MCM‐41 nanoparticles. Thus, an optimized route for the preparation of polypropylene nanocomposites achieving significant improvements in catalyst activity was developed. The nanocomposite materials were characterized by GPC, TGA and DSC. The dispersion state and the size of the nanoparticles incorporated in the polypropylene matrix were investigated by transmission electron microcopy. Additionally, this methodology allows simultaneous control of the desired amount of support and the concentration of catalyst to be used in the in situ polymerization. © 2015 Society of Chemical Industry     

Paired-wire carrying current actuators and piezoelectric beam sensors for microelectromechanical systems

Microsystem Technologies - An alternative actuator for MEMS/NEMS device is proposed and analyzed. The actuator is based on the paired-wires (PW) carrying current concept, which makes the actuator...     

PSW statistical LSB image steganalysis

Multimedia Tools and Applications - Steganography is the art and science of producing covert communications by concealing secret messages in apparently innocent media, while steganalysis is the art...     

Influence of TiN dopant on microstructure of TiB2 ceramic sintered by spark plasma

In this study, the impact of TiN as a sintering aid on the relative density and microstructure of TiB₂ ceramic was investigated. Monolithic TiB₂ and TiB₂ doped with 5?wt% TiN were sintered at 1900?°C for 7?min dwell time under the pressure of 40?MPa by spark plasma. The addition of TiN affected the microstructure of TiB₂-based sample considerably depicting the finer grains in the as-sintered ceramic. X-ray diffraction evaluation indicated that no interaction occurred between the initial materials. However, detail investigation by the map analysis and energy dispersive spectroscopy results revealed the formation of in-situ nano-sized hBN secondary phase in the TiN-doped TiB₂. In addition, TiN played a remarkable role on increasing the relative density of TiN-doped TiB₂ ceramic producing a nearly fully dense ceramic with relative density of 99.9% in comparison with the monolithic ceramic having 96.7% relative density.     

Full-duplex overlay cognitive wireless powered communication network using RF energy harvesting

In this paper, a novel full-duplex overlay cognitive wireless powered communication network (FD-OCWPCN) is proposed where a full-duplex (FD) hybrid-access point (H-AP) supports the full access of all battery-free secondary users (SUs). The H-AP broadcasts wireless power to empower the nearby SUs in the downlink (DL) phase while decoding the information transmitted uplink (UL) phase by the SUs, simultaneously. To overcome the self-interference (SI) phenomenon in FD-OCWPCN, the problem of maximizing the system sum-throughput with optimal UL-DL transmission/reception time and H-AP’s transmit power allocation is considered. This problem is non-convex under perfect/imperfect SI cancelation (SIC), so we employ the active interference temperature control and the gradient projection techniques to effectively reduce it into a convex problem. Closed-form expressions for the perfect/imperfect SIC cases are also derived. To assess the performance of the FD-OCWPCN, a comparison with a half-duplex OCWPCN (HD-OCWPCN) is provided. The achievable average sum-throughput for different FD/HD-OCWPCN is compared in the context of the average and peak transmit power at the H-AP, the number of SUs, path loss exponent and fairness metric. The simulation results depict the superiority of the FD-OCWPCN over the HD-OCWPCN for the perfect SIC and the effective imperfect SIC.

     

A latency-aware task scheduling algorithm for allocating virtual machines in a cost-effective and time-sensitive fog-cloud architecture

The Journal of Supercomputing - Recently, with the expansion of communications and generated data, the need for processing this high volume of data in minimum time and maximum speed has increased....     

Revamping SiO2 Spheres by Core–Shell Porosity Endowment to Construct a Mazelike Nanoreactor for Enhanced Catalysis in CO2 Hydrogenation to Methanol

Beyond the catalytic activity of nanocatalysts, the support with architectural design and explicit boundary could also promote the overall performance through improving the diffusion process, highlighting additional support for the morphology-dependent activity. To delineate this, herein, a novel mazelike-reactor framework, namely multi-voids mesoporous silica sphere (MVmSiO₂), is carved through a top-down approach by endowing core-shell porosity premade Stöber SiO₂ spheres. The precisely-engineered MVmSiO₂ with peripheral one-dimensional pores in the shell and interconnecting compartmented voids in the core region is simulated to prove combined hierarchical and structural superiority over its analogous counterparts. Supported with CuZn-based alloys, mazelike MVmSiO₂ nanoreactor experimentally demonstrated its expected workability in model gas-phase CO₂ hydrogenation reaction where enhanced CO₂ activity, good methanol yield, and more importantly, a prolonged stable performance are realized. While tuning the nanoreactor composition besides morphology optimization could further increase the catalytic performance, it is accentuated that the morphological architecture of support further boosts the reaction performance apart from comprehensive compositional optimization. In addition to the found morphological restraints and size-confinement effects imposed by MVmSiO₂, active sites of catalysts are also investigated by exploring the size difference of the confined CuZn alloy nanoparticles in CO₂ hydrogenation employing both in-situ experimental characterizations and density functional theory calculations.     

Failure Analysis and Remedy Procedure for Cracking of Fuel Nozzles in a Gas Turbine

A common failure in a certain type of gas turbine, observed during the first periodic inspection, is radial cracks in the tip plate of gas fuel nozzles. Here, each gas turbine has 18 nozzles. In all nozzles and in all similar units, these cracks of lengths ranging from 1 mm to a maximum of 14.5 mm are observed. As prescribed by the manufacturer, the defective part must be removed and replaced by welding and machining of a new one. But this problem is repeated and observed in the next periodic visits, and in all units. Depending on the number of nozzles in each gas turbine unit and the number of units in total, these repairs are very expensive and time-consuming. In this paper, the failure is analyzed and the causes of the cracks in the nozzles are investigated. Studies show that the main causes of nozzle failure are residual stresses caused by welding and thermal stresses caused by the start-up and shutdown processes. According to results, a solution has been proposed to release these residual and thermal stresses. After the implementation of this method in 1998, no more failure has been reported by the repair team, which proves the effectiveness of this solution. Since this paper has been prepared based on technical reports from the years between 1996 and 1998, the cited references of this paper are these technical reports.