Space charge measurement techniques and space charge inpolyethylene

Recently, several new techniques such as LIPP, PIPS, PEA and TP methods have been developed to measure directly the space charge distributions in insulating polymers. Many papers have been published on space charge in insulating materials. In this paper, the space charge measurement techniques and space charge in polyethylene are reviewed. The space charge distributions in polyethylene depend strongly upon additives (antioxidants, antistatic agents, etc.), oxidation products, byproducts from the crosslinking reaction (acetophenone, etc.). Some of them enhance electron (or hole) injection from the electrode and, as a result, homo space charge is formed. Ionic carriers are supplied from some impurities to form hetero space charge. Space charge distributions are also sensitive to the electrode material and the interface between different materials. From the space charge behavior observed, the space charge effects on the high-field conduction and breakdown phenomena have been discussed quantitatively and some of the high-field phenomena in polyethylene have been elucidated     

Analytical study of nuclear-coupled density-wave instability in a natural circulation pressure tube type boiling water reactor

An analytical model has been developed to study the nuclear-coupled density-wave instability in the Indian advanced heavy water reactor (AHWR) which is a natural circulation pressure tube type boiling water reactor. The model considers a point kinetics model for the neutron dynamics and a lumped parameter model for the fuel thermal dynamics along with the conservation equations of mass, momentum and energy and equation of state for the coolant. In addition, to study the effect of neutron interactions between different parts of the core, the model considers a coupled multipoint kinetics equation in place of simple point kinetics equation. Linear stability theory was applied to reveal the instability of in-phase and out-of-phase modes in the boiling channels of the AHWR. The results indicate that the stability behavior of the reactor is greatly influenced by the void reactivity coefficient, fuel time constant, radial power distribution and channel inlet orificing. The delayed neutrons were found to have a strong influence on the Type I and Type II instabilities observed at low and high channel powers, respectively. Also, it was found that the coupled multipoint kinetics model and the modal point kinetics model predict the same threshold power for out-of-phase instability if the coupling coefficient in the former model is half the eigen value separation between the fundamental and the first harmonic mode in the latter model. Decay ratio maps were predicted considering various operating parameters of the reactor, which are useful for its design.     

Human Chorionic Villous Differentiation and Placental Development

In humans, the placenta provides the only fetomaternal connection and is essential for establishing a pregnancy as well as fetal well-being. Additionally, it allows maternal physiological adaptation and embryonic immunological acceptance, support, and nutrition. The placenta is derived from extra-embryonic tissues that develop rapidly and dynamically in the first weeks of pregnancy. It is primarily composed of trophoblasts that differentiate into villi, stromal cells, macrophages, and fetal endothelial cells (FEC). Placental differentiation may be closely related to perinatal diseases, including fetal growth retardation (FGR) and hypertensive disorders of pregnancy (HDP), and miscarriage. There are limited findings regarding human chorionic villous differentiation and placental development because conducting in vivo studies is extremely difficult. Placental tissue varies widely among species. Thus, experimental animal findings are difficult to apply to humans. Early villous differentiation is difficult to study due to the small tissue size; however, a detailed analysis can potentially elucidate perinatal disease causes or help develop novel therapies. Artificial induction of early villous differentiation using human embryonic stem (ES) cells/induced pluripotent stem (iPS) cells was attempted, producing normally differentiated villi that can be used for interventional/invasive research. Here, we summarized and correlated early villous differentiation findings and discussed clinical diseases.     

Uterine Deletion of Bmal1 Impairs Placental Vascularization and Induces Intrauterine Fetal Death in Mice

Recently, it was demonstrated that the expression of BMAL1 was decreased in the endometrium of women suffering from recurrent spontaneous abortion. To investigate the pathological roles of uterine clock genes during pregnancy, we produced conditional deletion of uterine Bmal1 (cKO) mice and found that cKO mice could receive embryo implantation but not sustain pregnancy. Gene ontology analysis of microarray suggested that uterine NK (uNK) cell function was suppressed in cKO mice. Histological examination revealed the poor formation of maternal vascular spaces in the placenta. In contrast to WT mice, uNK cells in the spongiotrophoblast layer, where maternal uNK cells are directly in contact with fetal trophoblast, hardly expressed an immunosuppressive NK marker, CD161, in cKO mice. By progesterone supplementation, pregnancy could be sustained until the end of pregnancy in some cKO mice. Although this treatment did not improve the structural abnormalities of the placenta, it recruited CD161-positive NK cells into the spongiotrophoblast layer in cKO mice. These findings indicate that the uterine clock system may be critical for pregnancy maintenance after embryo implantation.     

Preparation of DNA–cyclodextrin–silica composite by sol–gel method and its utilization as an environmental material

A DNA–cyclodextrin–silica composite was prepared by the sol–gel method. This composite possessed the bi-functions of double-stranded DNA, such as intercalation into DNA, and cyclodextrin, such as inclusion into its intramolecular cavity. Therefore, we demonstrated the accumulation of harmful compounds from an aqueous multi-component solution using a DNA–cyclodextrin–silica composite column. As a result, the DNA–cyclodextrin–silica composite column can effectively accumulate not only planar structure-containing harmful compounds, such as dioxin and polychlorobiphenyl (PCB) derivatives, but also non-planar structure containing compounds, such as bisphenol A and diethylstilbestrol, from an aqueous multi-component solution. The accumulated amount of these harmful compounds was more than 90%. Additionally, the DNA–cyclodextrin–silica composite column was recycled by the application of methanol. Therefore, the DNA–cyclodextrin–silica composite may have the potential to be used as an environmental material for the accumulation of harmful compounds from industrial or experimental waste.     

Preparation of pectin‐inorganic composite material as accumulative material of metal ions

Pectin is one of the biopolymers in the cell walls of all plant tissues, but the pectin‐containing materials have been discarded as industrial waste in food‐processing factories. We prepared a water‐insoluble pectin‐inorganic composite material by mixing pectin and a silane coupling reagent, bis(3‐trimethoxysilylpropyl)amine. The mechanical strength of the pectin‐inorganic composite material was higher than that of the pectin material without the addition of an inorganic component. In addition, the thermal stability of the composite material increased with the addition of the inorganic component. Furthermore, when the pectin‐inorganic composite materials were incubated in an aqueous solution of Cu(II), Zn(II), or In(III), these composite materials effectively accumulated not only the heavy metal ions, but also rare‐earth metal ions. Additionally, based on the infrared (IR) measurements, the metal ion accumulative mechanism into the composite material is described. As a result, the IR spectra suggested an electrostatic interaction between the metal ion and carboxy group in the pectin. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42056.     

The Role of a Nonribosomal Peptide Synthetase in l‐Lysine Lactamization During Capuramycin Biosynthesis

Capuramycins are one of several known classes of natural products that contain an l ‐Lys‐derived l ‐α‐amino‐?‐caprolactam (l ‐ACL) unit. The α‐amino group of l ‐ACL in a capuramycin is linked to an unsaturated hexuronic acid component through an amide bond that was previously shown to originate by an ATP‐independent enzymatic route. With the aid of a combined in vivo and in vitro approach, a predicted tridomain nonribosomal peptide synthetase CapU is functionally characterized here as the ATP‐dependent amide‐bond‐forming catalyst responsible for the biosynthesis of the remaining amide bond present in l ‐ACL. The results are consistent with the adenylation domain of CapU as the essential catalytic component for l ‐Lys activation and thioesterification of the adjacent thiolation domain. However, in contrast to expectations, lactamization does not require any additional domains or proteins and is likely a nonenzymatic event. The results set the stage for examining whether a similar NRPS‐mediated mechanism is employed in the biosynthesis of other l ‐ACL‐containing natural products and, just as intriguingly, how spontaneous lactamization is avoided in the numerous NRPS‐derived peptides that contain an unmodified l ‐Lys residue.     

Preparation of microporous polypropylene sheets containing CaCO3 filler: Effect of draft ratio

Microporous polypropylene sheets were prepared as follows. First, polypropylene pellet-containing CaCO₃ filler was extruded to prepare base sheets, which were then biaxially stretched. The draft effect at the extrusion process was studied in relation to some properties of the resultant microporous polypropylene sheets. © 1996 John Wiley & Sons, Inc.     

Superabsorbent poly(acrylic acid) complex

Acrylic acid and crosslinking agent [poly(ethylene glycol)-diacrylate or divinylbenzene] were copolymerized in benzene in the presence of layered sodium silicate (δ-Na₂Si₂O₅) powder. The resultant poly(acrylic acid) complex shows large water absorbability, for which dependency on crosslinking degree was investigated. © 1996 John Wiley & Sons, Inc.