Carbon-supported growth of cross-linked platinum nanowires by surfactant templating and their elecrochemical characterization

Platinum/carbon (Pt/C) composite materials were prepared by the hydrazine reduction of H2PtCl6 confined to a mixed surfactant lytropic liquid crystal (LC)/C mixture with varying amounts of water. The reaction at relatively low water contents successfully yielded cross-linked Pt nanowires with wire-widths of 2-5 nm. The novel Pt nanostructure is believed to be from poorly hydrated hexagonal domains formed together with layered domains by the phase separation of the precursory LC mixture in the presence of carbon. Electrochemical measurements using cyclic volutammetry and membrane electrode assemblies revealed that the cross-linked nanowired Pt/C composite exhibits fairly high electrocatalytic activity for oxygen reduction reaction, as well as a high performance as the cathode material for polymer electrolyte fuel cells.     

Germanium recovery using polyphenol microspheres prepared by horseradish peroxidase reaction

BACKGROUND: The formation of polyphenol microspheres by the polymerization of 3‐methylcatechol was performed in a methanol/phosphate buffer solution using horseradish peroxidase (HRP), without the use of a surfactant or a water/oil interface, to be used for germanium recovery. RESULTS: The polyphenol microspheres were of diameter 1 mm. The functional group density of phenol group in the polymer was approximately 15 mol kg^?1 determined by the Folin‐Denis method. In batchwise experiments, the amount of germanium adsorbed was 0.23 mol kg^?1. CONCLUSION: Because germanium is a rare metal, a system for its recovery is required. Using the proposed system, continuous recovery of germanium can be achieved using multilayered microspheres. Copyright © 2011 Society of Chemical Industry     

Performances of metal fluoride added carbon anodes with pre-electrolysis for electrolytic synthesis of NF3

Metal fluoride added carbon anodes treated by pre-electrolysis were investigated for electrolytic production of nitrogen trifluoride (NF₃) in molten NH₄F·KF·4HF at 100 °C. The conditions for pre-electrolysis were first optimized using a graphite sheet anode as a model anode. The formation of fluorine-graphite intercalation compounds (fluorine-GICs) with semi-covalent C–F bonds, (C_xF)_n, on the MgF₂ and CaF₂ added carbon anode surface was accelerated by pre-electrolysis at potentials less than 4.0 V. Critical current densities (CCD) on the MgF₂ added carbon anodes pre-electrolyzed under various conditions were determined, and the highest CCD was 290 mA cm⁻² obtained for that pre-electrolyzed at 3.5 V for 500 C cm⁻². This anode was successfully used in the electrolysis at 100 mA cm⁻² for 290 h and the maximum NF₃ current efficiency was 55%. From these results, it was concluded that the metal fluoride added carbon anode treated by pre-electrolysis has a high potential for electrolytic production of NF₃ at higher current density.     

Miscibility Between Ethylene Vinyl Acetate Copolymers and Tackifier Resins

A series of ethylene vinyl acetate copolymer (EVA) were blended with various kinds of tackifiers and the miscibility between the components was investigated. The miscibility of the blend is illustrated as a phase diagram. The EVA and modified rosin systems tended to have a phase diagram with lower critical solution temperature (LCST), whereas the EVA and petroleum resin systems tended to have that with upper critical solution temperature (UCST). The phase diagrams of EVA/tackifier resins systematically changed as VAc content in the copolymer increased, which is accounted for by the classical Flory-Huggins theory.     

Absorption and Fluorescence Spectra of Nitrobenzanthrones

To identify nitrobenzanthrones (NBAs) such as 3-nitro-7 H -benz[ de ]anthracene-7-one (3-NBA) on the basis of their electronic spectral data, we have synthesized 1-, 2-, 3-, 9-, and 10-NBAs and measured their absorption and emission spectra. The first strong absorption band of the NBAs appeared in the region 350-440 nm; the band of 10-NBA was red-shifted by about 20 nm. The molar absorptivities of 3- and 9-NBA were about two times as large as those of the others. The fluorescence spectra of the NBAs varied more largely with the position of the nitro group compared to the absorption spectra. The quantum yields of fluorescence were very small, ranging from ～10 m 2 for 2- and 10-NBA to ～10 m 4 for 1- and 3-NBA. 3-NBA exhibited a characteristic spectrum with two broad bands at 450 and 530 nm. On excitation causing an n ~ * transition in the NBAs, their fluorescence intensities increased by a factor of 10. Phosphorescence was observed at 77 K for all compounds though that of 1-NBA was very weak. These results give the promise of characterizing individual isomers of NBAs on the basis of their spectroscopic data.     

Development of Novel Inhibitors for Histone Methyltransferase SET7/9 based on Cyproheptadine

The histone methyltransferase SET7/9 methylates not only histone but also non‐histone proteins as substrates, and therefore, SET7/9 inhibitors are considered candidates for the treatment of diseases. Previously, our group identified cyproheptadine, used clinically as a serotonin receptor antagonist and histamine receptor (H1) antagonist, as a novel scaffold of the SET7/9 inhibitor. In this work, we focused on dibenzosuberene as a substructure of cyproheptadine and synthesized derivatives with various functional groups. Among them, the compound bearing a 2‐hydroxy group showed the most potent activity. On the other hand, a 3‐hydroxy group or another hydrophilic functional group such as acetamide decreased the activity. Structural analysis clarified a rationale for the improved potency only by tightly restricted location and type of the hydrophilic group. In addition, a SET7/9 loop, which was only partially visible in the complex with cyproheptadine, became more clearly visible in the complex with 2‐hydroxycyproheptadine. These results are expected to be helpful for further structure‐based development of SET7/9 inhibitors.     

Conductive and flexible multi-walled carbon nanotube/polydimethylsiloxane composites made with naphthalene/toluene mixture

Conventional conductive materials face challenges when utilizing them for flexible and wearable electronics and soft robotics. Carbon nanotube/polydimethylsiloxane (CNT/PDMS) composites are a promising alternative to the conventional hard conductors because they are light and can realize large deformation. To date, well dispersion of CNTs into PDMS to increase conductivity while maintaining flexibility remains challenging. We aimed at developing highly electrically conductive and flexible multi-walled carbon nanotube/PDMS (MWCNT/PDMS) composites. To this end, we proposed a method to enhance the dispersion of MWCNTs into PDMS using naphthalene and toluene. Our results showed that the addition of naphthalene and toluene into the composites improved dispersion of the MWCNTs and increased the direct current (DC) electrical conductivity. We also found that the morphology of primary aggregates of the MWCNTs influenced the DC electrical conductivity of the composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48167.     

Evaluation of temperature characteristics of high-efficiency InGaP/InGaAs/Ge triple-junction solar cells under concentration

Temperature characteristics of the open-circuit voltage (V_oc) were investigated in the temperature range from 30°C to 240°C for the InGaP/InGaAs/Ge triple-junction cells. Also, single-junction cells that had the similar structure to the subcells in the triple-junction cells were studied. In the high-temperature range (from 170°C to 240°C), the temperature coefficients of V_oc of the InGaP/InGaAs/Ge triple-junction solar cell (dV_oc/dT) were different from those in the low-temperature range (from 30°C to 100°C). This is because photo-voltage from the Ge subcell becomes almost 0 V in the high-temperature range. It was found that the open-circuit voltage of a Ge single-junction cell reduced to almost 0 V temperatures over 120°C under 1 sun condition.     

Fracture mechanism characterization of cross-ply carbon-fiber composites using acoustic emission analysis

The sequence of microscopic fracture mechanisms in locally loaded cross-ply carbon-fiber composites was studied by analyzing acoustic emission (AE) signals in combination with the modal analysis of Lamb waves, using microscopic and ultrasonic examination of the specimen after load interruption. The first 70 AE events were analyzed, which were detected during the initial loading segment when the first sudden load drop and gradual load recovery were observed. Characteristics of the detected waves were compared with the S₀- and A₀-mode Lamb waves produced by a spot- or line-focused YAG laser. The internal damage progression of the composite specimen was determined to be the fiber fracture in the front lamina, transverse cracks in the mid-lamina, delamination and splitting.     

The effect of the addition of silica particles on linear spherulite growth rate of isotactic polypropylene and its explanation by lamellar cluster model

The effect of the addition of silica particles on spherulite growth rates of isotactic polypropylene has been investigated using an optical microscope. The spherulite growth rate remained constant with time and the growth rates decreased with increasing the silica content. The addition of silica particles generally causes a reduction of the average distance between adjacent silica particles and the linear growth rates become zero when the inter-particle distance reached to the end-to-end distance of the matrix chains. The reduction in the linear growth rate can be explained by assuming the lamellar clustering process that the precursor or solidified units with the single chain space, which spontaneously are built up from the melt, act as the crystallizing units and the diffusive mobility of the units was restricted by spatial confinement between adjacent silica particles.