Efficient frequency doubling of 1-W continuous-wave Ti:sapphire laser with a robust high-finesse external cavity

We demonstrated an intrinsic conversion efficiency of 56% from the input fundamental power to the generated second-harmonic power. The second-harmonic power of 581 mW was obtained from the external cavity with a LiB3O5 crystal through the frequency doubling of a 1.17-W Ti:sapphire laser at 746 nm, when the finesse of the robust external cavity was 260.     

Studies on absorbed water in cellulose by broad-line NMR

Nuclear magnetic resonance absorption spectra of linter cellulose containing various amounts of water were studied to clarify the relation between the amount of absorbed water in cellulose fiber and the molecular motion in such a cellulose–water system. An amorphous cellulose sample was used for the sake of comparison. The changes in line width and second moment of the spectra were measured at various temperatures. From the variation with temperature of the first-derivative curves and the second moments, it has been inferred that the proton movement of absorbed water changes markedly over the approximate range 180°–200°K and that the absorbed water lowers the glass transition temperature of cellulose to room temperature.     

Study of a Helium Film in 10 μm Porous Glass by Torsional Oscillator in Free Decay Mode

Dissipation and superfluid density of a thin helium film (superfluid transition at temperature T_c=0.88 K), placed in 10 m porous glass are studied as a function of oscillation amplitude or AC amplitude at fixed temperatures near superfluid transition. The measurements are performed using a high-Q torsional oscillator in the free decay mode as well as constant drive mode. Results show decreasing superfluid density with increasing velocity and non-monotonic behavior of the dissipation in the film.     

Characteristics of porous polymer composite columns prepared by radiation cast-polymerization

Porous polymer composite columns having porous structure were prepared by radiation cast-polymerization of hydrophilic monomers at low temperature and their characteristics were studied. The porosity of the polymer increased with decreasing monomer concentration. The elution time of water in the polymer column increased with increasing monomer concentration and with decreasing irradiation temperature. The elution time was dependent on the degree of hydration of the polymer. The polymer with a degree of hydration of 0.2 to 0.4 gave the minimum elution time. The elution time decreased with the addition of porous inorganic substances.     

Antibacterial action on pathogenic bacterial spore by green tea catechins

Antibacterial effects of catechins, the major green tea polyphenols, were studied using Clostridium and Bacillus spores. Incubation with crude catechins decreased the number of C botulinum and C butyricum spores but not B cereus spores. Furthermore, the effects of six catechin derivatives on spores were investigated. (−)‐Epicatechin gallate (ECg), (−)‐epigallocatechin (EGC), (−)‐epigallocatechin gallate (EGCg) and (+)‐gallocatechin gallate (GCg) were more effective in decreasing C botulinum and C butyricum spore numbers than (+)‐catechin (C) and (−)‐epicatechin (EC). The vegetative growth of C botulinum and B cereus was inhibited by crude extracts of the catechins. Specifically, purified GCg and EGCg inhibited the vegetative growth of C botulinum and B cereus. The inhibitory effect of ECg on B cereus was similar to that of GCg. However, toxin‐production by B cereus was not inhibited by catechin. Damage to the membrane of C butyricum spores by catechin derivatives was shown using fluorescent microscopy. This study shows that low concentrations of catechins, although requiring a long exposure time, inhibited the growth of bacterial spores. However, the effects of the purified derivatives of the catechins were not the same and GCg and EGCg were found to be the most potent. Spores that are generally resistant to many disinfectants were sensitive to catechins. Copyright © 2005 Society of Chemical Industry     

Functional metal-porphyrazine derivatives and their polymers, 10. Secondary fuel cells based on oxygen reduction on platinum electrode modified by polymers and metal-phthalocyanines

Secondary fuel cells based on oxygen reduction of platinum electrode modified by polymers and metal-phthalocyanine (Mt = Fe(III), Co(II), Ni(II), and Cu(II)) were studied. The discharge curves for the platinum electrode modified by poly(2-vinylpyridine) (or polystyrene) and Co-phthalocyanine in 30% KOH aqueous solution, for a 30 min charge at 500 μA, followed by a 100 μA discharge showed a stable plateau at about ?0.24 V SCE (Saturated Calomel Electrode). The open circuit voltage (vs. Zn) of the cell was 1.2 V, and the discharge capacity was of 46 A · h/kg. For this battery there was no significant decay in its characteristics after more than 30 charge-discharge cycles. In Mt-phthalocyanines, the values decreased in the order of Co(II) > Fe(III) > > Cu(II) > Ni(II). From a cyclic voltammogram for the electrode modified by the polymer and Co-Pc, the cathodic reactions were discussed.     

Immobilization of mortierella vinacea cells by radiation polymerization

Immobilization of Mortierella vinacea cells, which contain active α-galactosidase, by radiation polymerization at low temperatures was studied. The durability of the enzymatic activity of the immobilized cells was examined by repeating the batch enzyme reaction. The enzymatic activities of the immobilized cells obtained with hydrophilic monomers was affected by the concentrations of the cells and monomer in which optimum conditions were observed. The enzymatic activity of the immobilized cells obtained with hydrophilic monomer was compared to that of hydrophobic monomers. Michaelis constants of the immobilized cells varied with monomer concentration. The effect of addition of porous solid substances on the immobilization of the cells was studied.     

Novel High‐Temperature Antiferroelectric‐Based Dielectric NaNbO3–NaTaO3 Solid Solutions Processed in Low Oxygen Partial Pressures

The (1?x)NaNbO₃–(x)NaTaO₃ solid solution was investigated for x ≤ 0.4 in terms of new high‐temperature and high‐permittivity dielectric system that is suitable for base metal inner electrode capacitor applications. The addition of Ta significantly enhanced the resistivity of the dielectric, resulting in superior resistivity than the dielectrics‐formulated BaTiO₃ systems that dominate the multilayer ceramic capacitor dielectric devices. The voltage dependence of the permittivity was also superior to BaTiO₃‐based materials, providing higher capacitance at higher temperatures. A transmission electron microscopy study illustrated that the grains had so‐called core‐shell structure. According to the electron diffraction analysis, the core region had an inhomogeneous structure between antiferroelectric and ferroelectric phases, and shell region had an incommensurate ferroelectric‐like structure. The core and shell region had Nb‐ and Ta‐rich composition, respectively, and their interface was compositionally sharp, implying that shell region was formed via a liquid phase during the sintering process with an incongruent Ta dissolution reprecipitation. We anticipate that these or similar materials based on the alkali‐niobate perovskites can be further enhanced to provide capacitor solutions from 150°C to 250°C, which is an important range for a number of new AC–DC invertor and engine control units.     

Study of Pt electrode dissolution in H2O2-containing H2SO4 solution using an electrochemical quartz crystal microbalance

Pt electrode dissolution has been investigated using an electrochemical quartz crystal microbalance (EQCM) in H₂O₂-containing 0.5 mol dm⁻³ H₂SO₄. The Pt electrode weight-loss of ca. 0.4 μg cm⁻² is observed during nine potential sweeps between 0.01 and 1.36 V vs. RHE. In contrast, the Pt electrode weight-loss is negligible without H₂O₂ (<0.05 μg cm⁻²). To support the EQCM results, the weight-decrease amounts of a Pt disk electrode and amounts of Pt dissolved in the solutions were measured after similar successive potential cycles. As a result, these results agreed well with the EQCM results. Furthermore, the H₂O₂ concentration dependence of the Pt weight-decrease rate was assessed by successive potential steps. These EQCM data indicated that the increase in H₂O₂ accelerates the Pt dissolution. Based on these results, H₂O₂ is known to be a major factor contributing to the Pt dissolution.     

共析钢中片层状渗碳体冷轧后的形态变化

The pearlitic transformation and the deformation behavior of lamellar cementite after cold rolling in eutectoid steels Fe-0. 76%C-0. 137%Mn (mass fraction) were studied by means of Formastor-F (Full Automatic Transformation Testing Instrument) and field emission scanning electronic microscopy (FESEM) observation. Fine and coarse pearlite were obtained in the eutectoid steels austenitized at 900℃ for 15min, then hold at 620℃ for 90 s and 690℃ for 7 h, respectively. Thedeformation behavior of cold rolled lamellar cementite could be classified as: cleavage fracture, inhomogeneous slip, fragmentation, thinning or necking, and homogeneous bending. The cementite lamellae with the thickness of more than 100 um could be deformed plastically.