Growth of emerald crystals from PbO · V2O5 flux

The flux growth of emerald crystals by slow cooling in the PbO · V₂O₅ flux is reported. The crystals exhibited the typical emerald-green colour, were up to 1.8 mm in size and transparent. Their form was a regular hexagonal rod bounded by the well-developed {0001} and {10ˉ10} faces. The solubility of emerald in PbO · V₂O₅ was also investigated; about 9.0 g emerald was dissolved in 100 g PbO · V₂O₅ at 1200 °C. The solubility decreased gradually with decreasing temperature. Taking the solubility data into account, the presence of undissolved particles in the solution was found to be a necessary condition for the growth of large emerald crystals. Unsaturated solution at a soak temperature produced good and relatively small emerald crystals in a subsequent cooling experiment. Advantages of the PbO · V₂O₅ flux are also mentioned. Emerald crystals showing various kinds of imperfections, and even good crystals, were also present.     

2D Model-Following Servo System

This paper gives, in view of the feature of practical 2D (2-dimensional) systems, a formulation of the 2D model-following servo problem for the case where one of the independent variables of the considered 2D systems is unbounded and the other one is bounded. That is, to determine a control input such that the outputs of a given 2D plant asymptotically track, with tracking error as small as possible, the (step) response of a given 2D model system as the unbounded variable approaches infinite. It is shown that this problem under a specified quadratic performance index can be transformed into a 1D LQR problem, and thus can be solved by the well-known 1D approaches. The relation between the solvability condition obtained for the equivalent 1D LQR problem and the practical stabilizability and detectability of the original 2D plant is clarified. Its application to the design of non-unit memory linear multipass processes is also shown. Finally, a numerical example for metal rolling process is given to verify the effectiveness.     

Antioxidant activity of Japanese pepper (Zanthoxylum piperitum DC.) fruit

Antioxidants were extracted from Japanese pepper (Zanthoxylum piperitum DC.) fruit and characterized. The antioxidant activity of the methanol extract from Japanese pepper fruit was found to be equal to that of α-tocopherol and stable under heat treatment. The main compounds that gave a significant antioxidant activity from the methanol extract were identified to be hyperoside (quercetin-3-O-galactoside) and quercitrin (quercetin-3-O-rhamnoside) as determined by HPLC, mass spectrometry, UV/Vis spectroscopy, and TLC. Radical-scavenging activities of hyperoside and quercitrin from Japanese pepper fruit were evaluated using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) method. As a result, hyperoside and quercitrin scavenged DPPH radical strongly with IC₅₀ values of 16 and 18 μM, respectively. These observations show the presence of strong antioxidants, namely hyperoside and quercitrin in Japanese pepper fruit.     

Design study of PbBi- and NaK-cooled small deep sea fast reactors

The liquid lead-bismuth eutectic (PbBi) has good compatibility with water, which is different from sodium. It is expected that the PbBi could be used as a coolant of the deep sea fast reactor (DSFR). Physics analysis of the PbBi-cooled small reactor cores with and without inner control rods performed using the computer program of a neutronics code system (SRAC95) shows that PbBi is suitable for the coolant of small reactors as well as NaK.     

Nondestructive inspection of thermal barrier coating of gas turbine high temperature components

A thermal barrier coating (TBC) is applied to high‐temperature components in gas turbines, and consists of a ceramic topcoat and a metallic bondcoat. Various kinds of TBC degradation and damage occur in high‐temperature components during service, such as topcoat thinning, topcoat delamination, and formation of a thermally grown oxide (TGO) layer below the topcoat, each of which can be examined using a suitable nondestructive inspection technique. Topcoat thinning can be detected by topcoat thickness measurement using terahertz waves, which are electromagnetic waves in the frequency region between optical and radio waves. The measurement resolution is about 10 μm, which is comparable to microscopic observation of the cross section in destructive inspection. Topcoat delamination can be detected by active thermography, in which the topcoat surface is scanned by a heating laser and the surface temperature distribution is measured by a thermal infrared camera. The combination of temperature peak and residual thermal image detection is effective in eliminating false detection. The TGO layer can be detected using photoluminescence, in which the Cr³⁺ ions included as an impurity in Al₂O₃ are detected. Since delamination tends to occur at locations at which the TGO layer has grown, TGO layer detection provides an effective method to select regions where delamination has occurred or is likely to occur. An inspection flow based on these techniques is proposed, which is expected to aid the establishment of condition‐based maintenance strategies of high‐temperature components. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Method to Estimate Thermal Shrinkage Behavior of Glasses

We present a method to estimate the effect of heat treatment on the shrinkage behavior of glasses. As a pre-requisite, sensitivity of the glass density as a function of glass fictive temperature is measured using the sink–float method and the slope of the relationship is used to determine the linear thermal strain proportionality factor. Evolution of the fictive temperature for different temperature–time history is measured using the infrared spectroscopy method and the results are used to estimate the structural relaxation parameters in the temperature range of interest. The overall shrinkage behavior is predicted using the linear thermal strain factor and estimated change in fictive temperature due to the thermal treatment. The predicted shrinkage behavior is observed to be in good agreement with the independent dimensional change measurements performed on large glass sheets that have undergone similar thermal treatments.     

Electropolymerization kinetic study of 3,3-dimethyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepine and its optical optimization for electrochromic window applications

Poly (3,3-dimethyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepine), PProDOT-Me₂, is one of the most promising conducting polymers in the alkylenedioxythiophene based family for electrochromic window applications. In the electropolymerization kinetic study of 3,3-dimethyl-3,4-dihydro-2H-thieno[3,4-b][1,4]dioxepine (ProDOT-Me₂), microgravimetry and chronoamperometry were used to determine the reaction orders with respect to the electrolyte and monomer, and the corresponding general kinetic equation of electropolymerization. This study presents that monomer concentration has a strong impact on electropolymerization mechanism. The relationship between film thickness and polymerization time was analyzed indicating that saturation of polymerization reduced the increase rate of film thickness with polymerization time. Also, the electropolymerization conditions were optimized to reach high contrast (Δ%T > 70%) with the minimum of transmittance (%T_min < 1) for electrochromic window applications.