Development of the Water Cooled Ceramic Breeder Test Blanket Module in Japan

The development of a Water Cooled Ceramic Breeder (WCCB) Test Blanket Module (TBM) is being performed as one of the most important steps toward DEMO blanket in Japan. For the TBM testing and evaluation toward DEMO blanket, the module fabrication technology development by a candidate structural material, reduced activation martensitic/ferritic steel, F82H, is one of the most critical items from the viewpoint of realization of TBM testing in ITER. In Japan, fabrication of a real scale first wall, side walls, a breeder pebble bed box and assembling of the first wall and side walls have succeeded. Recently, the real scale partial mockup of the back wall was fabricated. The fabrication procedure of the back wall, whose thickness is up to 90 mm, was confirmed toward the fabrication of the real scale back wall by F82H. Important key technologies are almost clarified for the fabrication of the real scale TBM module mockup. From the view point of testing and evaluation, development of the technology of the blanket tritium recovery, development of advanced breeder and multiplier pebbles and the development of the blanket neutronics measurement technology are also performed. Also, tritium production and recovery test using D-T neutron in the Fusion Neutronics Source (FNS) facility has been started as the verification test of tritium production performance. This paper overviews the recent achievements of the development of the WCCB TBM in Japan.     

Miscibility between natural rubber and tackifiers. II. Phase diagrams of the blends of natural rubber and petroleum resins

Natural rubber (NR) was blended in various ratios with 12 kinds of tackifiers that were prepared from petroleum. The blends were heated to various temperatures (20–120°C) to investigate their miscibility. The blends were visually observed for transparency or opacity at each temperature and further observed under an optical microscope for any existence of phase-separated structure. Miscibility of the blends is illustrated as phase diagrams in this article. NR/aliphatic resin systems and NR/aliphatic-aromatic copolymer systems showed phase diagrams of the lower critical solution temperature type, wherein the blends turned faintly cloudy over the binodal curves. The NR/hydrogenated petroleum resin system also showed a phase diagram of the lower critical solution temperature type. The miscible range of a blend system tends to become smaller as the molecular weight of a tackifier increases. Resins prepared by polymerization of pure aromatic monomers were completely immiscible with NR. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 221–229, 1998     

Stability-based validation of clustering solutions

Data clustering describes a set of frequently employed techniques in exploratory data analysis to extract "natural" group structure in data. Such groupings need to be validated to separate the signal in the data from spurious structure. In this context, finding an appropriate number of clusters is a particularly important model selection question. We introduce a measure of cluster stability to assess the validity of a cluster model. This stability measure quantifies the reproducibility of clustering solutions on a second sample, and it can be interpreted as a classification risk with regard to class labels produced by a clustering algorithm. The preferred number of clusters is determined by minimizing this classification risk as a function of the number of clusters. Convincing results are achieved on simulated as well as gene expression data sets. Comparisons to other methods demonstrate the competitive performance of our method and its suitability as a general validation tool for clustering solutions in real-world problems.     

Sinterability and properties of Ti(N1−x,O x ) y -(V,Ta)C-Ni sintered alloys having a golden colour

The effect of oxygen and carbide addition on the sinterability of TiN _y (0.42<y<1)-Ni alloys, in which part of the nitrogen is replaced by oxygen was investigated. It was found that sinterability increased as the oxygen and carbide content increased, but the strength of the resultant sintered alloys was significantly reduced due to the presence of Ni₃Ti and Ti₂O₃ phases when the oxygen content exceeded 50 mol %. The sintered alloy with the highest hardness was found whenx=0.7,y=0.78 and the (V,Ta)C content was 18% by weight and this alloy was characterized by having a low density, good corrosion resistance and the colour of gold.     

A new partitioning process for high-level liquid waste by extraction chromatography using silica-substrate chelating agent impregnated adsorbents

To separate the long-lived minor actinides (MA(III) = Am(III), Cm(III)) and some specific fission products (FP) such as Pd(II), Mo(VI), Cs(I) and Sr(II) from high-level liquid waste (HLLW), we have been studying a new partitioning process by extraction chromatography using several novel silica-based extraction resins. In this work, we examined the separation behavior of the elements contained in a simulated MA-effluent by the CMPO/SiO₂P packed column. In addition, as an attempt to further isolate Am(III) and Cm(III) from the heavy RE(III) such as Eu(III), Gd(III) and Dy(III) contained in the MA-effluent, we investigated the possibility of separation by using a silica-based cationic exchange resin. Furthermore, to isolate Sr(II) from the HLLW, adsorption and separation performances of Sr(II) and some other FP elements were studied by using a novel silica-based crown ether extraction resin, DtBuCH18C6/SiO₂P. The experimental results demonstrated that the elements in the simulated MA-effluent can be successfully separated to (1) Pd, (2) MA-hRE and (3) Zr–Mo, by CMPO/SiO₂P packed column using water and a dilute DTPA solution as eluents. Am(III) and Cm(III) are expected to be effectively separated from light RE(III) and Y(III) by the SiSCR cationic resin. However, more effective separation between Am(II), Cm(III) and heavy RE(III) such as Eu(III), Gd(III) and Dy(III) needs further approach. DtBuCH18C6/SiO₂P showed a highly selective adsorption for Sr(III) so that the Sr(II) could be completely separated from other FPs except a portion of Ba(II).     

Influence of quadrature‐axis reactance of large turbine generator on operation

Two‐pole large generators are extensively used in power utilities. Growing demand for electric power in recent years has led to substantial increases in the capacity of generators. In line with this trend, our company has manufactured two‐pole turbine generators in the 900,000‐kVA to 1,200,000‐kVA classes. As the capacity of generators becomes larger, equivalent circuits are increasingly expected to improve their precision in estimating operation characteristics. The Park model has been widely used as an equivalent circuit model. The Park model with quadrature axis transient reactance $x_{q}^{\prime}$ is claimed to be useful for accurately estimating the load rejection characteristics of turbine generators. However, it is difficult to measure $x_{q}^{\prime}$, few studies based on measured data have appeared. As one of the few examples, we have conducted a measured data on a 500,000‐kVA‐class generator. Recently, the authors obtained test data on $x_{q}^{\prime}$ of a 900,000‐kVA‐class generator. In this study, based on these data, we studied the effect of $x_{q}^{\prime}$ using the finite element method and a transient analysis program (EMTP‐ATP). © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 177(3): 17–27, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21099     

Simulation of transverse crack formation on continuously cast peritectic medium carbon steel slabs

Reliable data are limited to the critical strain for the formation of transverse cracks on the slabs, owing to experimental difficulty to simulate temperature gradient in solidified shell in continuous casting mold. The present study is to determine the critical strain, ?_c, for the formation of transverse cracks on continuously cast slabs. A convenient and simple hot tensile test using rectangular test pieces with either V-notch or semi-circle notch or oscillation marks has been developed by placing the specimen under similar temperature gradient to that in solidified shell in the mold. The ?_c has been determined at a better accuracy and reproducibility, and the ?_c at a strain rate of 5?10^?4s^?1 is found to be a high 35% for test pieces without notch. It sharply decreases, however, to 10% for those with V- and semi-circle-notches, slightly decreases with increasing notch depth, and further decreases for those with oscillation marks that accompany solute segregation. Reduction of the oscillation mark depth is shown to be important measure to prevent the occurrence of transverse cracking of continuously cast slabs.     

Context-Based Network and Application Management on Seamless Networking Platform

A context-based adaptive communication system is introduced for use in heterogeneous networks. Context includes the user's presence, location, available network interfaces, network availability, network priority, communication status, terminal features, and installed applications. An experimental system was developed to clarify the feasibility of using context information to flexibly control networks and applications. The system operates on a seamless networking platform we developed for heterogeneous networks. By using contexts, the system can inform the caller and callee of applications they can access, which are available through the network before communication occurs. Changes in contexts can switch an on-going application to another during actual communication. These functions provide unprecedented styles of communication. A business scenario for a seamless networking provider is also presented. Dr. Morikawa has also been in charge of NICT's Mobile Networking Group. Masugi Inoue received his B.E. from Kyoto University in 1992 and his M.E. and D.E. from the University of Tokyo in 1994 and 1997, all in the field of Electrical Engineering. He is currently a senior researcher at the Yokosuka Radio Communications Research Center under the National Institute of Information and Communications Technology (NICT), Japan, and has been engaged in R&D on ultrahigh-speed WLANs and mobile networking. He joined the Communications Research Laboratory (CRL) of the Ministry of Posts and Telecommunications, Japan, in 1997, which was reorganized as NICT in April 2004. He was a visiting researcher at Polytechnic University in Brooklyn, New York in 2000. Khaled Mahmud received his B.Sc. (Eng.) in Electrical and Electronics Engineering from the Bangladesh University of Engineering and Technology in Dhaka in 1991. He received his M.E. and Ph.D. in the same field from Shizuoka University in Japan, in 1997 and 2000, respectively. He was a research fellow at NICT, Japan, from 2000 to 2004. He is currently an Assistant Professor in the Department of Computer Science and Engineering at North South University, Bangladesh. His research interests include modulation-demodulation techniques, software radio, mobile communication systems, wireless Internet, and IP mobility technologies. Homare Murakami received his B.E. and M.E. in Electronic Engineering from Hokkaido University in 1997 and 1999. In 2004, he received the Young Investigators Award from IEICE. He is currently a researcher at NICT's Mobile Networking Group. He is also an industrial PhD student in Aalborg University since 2003. His interest areas are naming scheme, wireless TCP and new transport protocol, IP mobility, fast handover method, and location management. Mikio Hasegawa received his B. Eng, M. Eng., and Dr. Eng. in 1995, 1997, and 2000 from Science University of Tokyo. From 1997 to 2000, he was a Research Fellow of the Japan Society for the Promotion of Science (JSPS). He is currently a senior researcher in Mobile Networking Group, National Institute of Information and Communications Technology, and a technical advisor in ChaosWare Inc. His research interests include applications of chaotic dynamical theory, combinatorial optimization, mobile networks, and ubiquitous computing. Hiroyuki Morikawa received his B.E., M.E., and D.E. in Electrical Engineering from the University of Tokyo in 1987, 1989, and 1992. He is currently an Associate Professor in the Department of Frontier Informatics at the University of Tokyo and is in charge of NICT's Mobile Networking Group. His research interests are in the areas of computer networks, mobile computing/networks, ubiquitous computing, and network services. He serves as Editor of Transactions of the IEICE and has been on the technical program committees of IEEE/ACM conferences and workshops. He sits on numerous telecommunications advisory committees and frequently serves as a consultant to the government.     

A new choleretic effect of folinic acid

BACKGROUND/AIMS: In the chemotherapy of recurrent gastric cancer with 5-fluorouracil and folinic acid, an interesting phenomenon, the reduction of jaundice and improvement of liver function, was observed. The aim of this study was to investigate the mechanism of this phenomenon, and to confirm a choleretic effect of folinic acid. METHODOLOGY: The bile duct of anesthetized rats was catheterized, and bile was collected. Bile volume and total bile acid production following intraperitoneal administration of folinic acid were determined and compared to those of control rats. RESULTS: Both bile volume and total bile acid production increased following intraabdominal administration of folinic acid. CONCLUSIONS: Folinic acid has a newly described pharmacologic effect of stimulating bile acid-dependent choleresis. It is possible that folinic acid may become a new drug for the treatment of jaundice or for the improvement of overall liver function.