Radiation of X-Rays Using Polarized LiNbO3 Single Crystal in Low-Pressure Ambient Gas

The dependence of X-ray intensity on the pressure and type of ambient gas was investigated for LiNbO₃ single crystals polarized in the c-axis direction at pressures of approximately 1 to 30 Pa. Ionization of surrounding gas molecules by the electric field generated by the crystal led to the production of both positive ions and free electrons. The electrons were accelerated toward a Cu target, radiating both white X-rays and X-rays specific to the crystal or target material by bremsstrahlung. The integrated X-ray intensity per cycle in the energy range 1 to 20 keV showed a local maximum value at a pressure P_max. The logarithm of P_max was proportional to the Boltzmann factor using the first ionization energy of each ambient gas molecule. The value of P_max was found to be independent of the electrical surface area of the crystal. The integrated X-ray intensity was approximated qualitatively by a quadratic function with pressure, which was upwardly convex. It was found that one of the causes of the reduction in X-ray intensity at pressures P > P_max is the adsorption of positive ions generated by the ionization of gas molecules on the negative electric surface. It was also discovered that the lifetime of the X-ray radiation device could be improved when the X-ray radiation case was covered with another hermetically sealed decompression case. The gas with the smallest first ionization energy, with a partial pressure of P_max, was enclosed inside the X-ray radiation case (inner case) and the gas with the largest first ionization energy was enclosed at a suitable pressure between the inner and outer cases.     

Space charge behavior in low density polyethylene at pre-breakdown

It has been known that the electrical breakdown of insulating materials is strongly affected by the formation of space charge in the bulk of the materials. Many researchers have attempted to study the relationship between the space charge and the breakdown; however, it has not been clarified yet. Although the pulsed electroacoustic (PEA) method has been widely used to observe space charge profiles, previous works have not shown clear evidence of the influence of the space charge on the breakdown. Therefore, we have developed a new PEA system with an interval of 0.5 ms to observe the space charge distribution continuously under the ultra-high electric field. Using this system, we observed the space charge dynamics in the low-density polyethylene (LDPE) at and around the breakdown. We also investigated the dependence of the applied electric field on space charge behavior. From the results, it is found that the injected charge packet moved faster and deeper under a relatively lower electric field rather than that under a higher electric field. Furthermore, we found that the maximum electric field in each specimen was almost the same when the breakdown happened in a specimen.     

Relation between passive smoking at home and dietary intake

Recent attempts to protect hematopoietic progenitor cells from cytarabine (ara-C)-induced toxicity by transfer of the cytidine deaminase (CDD) gene resulted in efficient in vitro inducibility of ara-C resistance. Another enzyme involved in intracellular ara-CTP inactivation is the deoxycytidylate deaminase (dCMPD). We therefore transfected the human dCMPD cDNA gene into murine fibroblasts and investigated the relationship of forced dCMPD expression and resistance induction to ara-C. Several cell lines were established which demonstrated a 1.7-3.5-fold increase in cellular dCMPD activity and an up to 2-fold increase in the IC50 value of ara-C. However, increases in dCMPD activities did not show a positive linear correlation with the induction of ara-C resistance. In addition, CD34 + hematopoietic progenitor cells revealed the highest endogenous dCMPD enzyme levels among different human hematopoietic cells. Thus, despite the documented role for dCMPD in ara-CTP inactivation of certain cell types, these results suggest that the dCMPD gene may prove less useful than the CDD gene as a therapeutic target in attempts to attenuate ara-C-induced bone marrow toxicity.     

Computer-aided design of a factor Xa inhibitor by using MCSS functionality maps and a CAVEAT linker search

We have investigated a new approach to efficiently find a novel inhibitor against a serine protease (i.e. an activated coagulation factor X, FXa) by using de novo design programs and the X-ray crystal structure of the target enzyme. FXa is a coagulant enzyme that generates thrombin (a serine protease) and participates in both intrinsic and extrinsic coagulation pathways. We adopted multiple copy simultaneous search (MCSS) and CAVEAT linker search techniques, which disclosed a novel FXa inhibitor (T01312) consisting of two binding moieties (the benzamidinyl and adamantyl groups) and a linker unit (the carboxybenzylamine group). The inhibitory activity of T01312 against FXa was determined to be a small K(i)-value of 48nM, which is two orders of magnitude smaller than that against thrombin. An X-ray crystal analysis of T01312 complexed with trypsin (an analogue of FXa) and docking studies of T01312 with trypsin and FXa showed that: (i) the benzamidinyl group is a predominant binding moiety in the anionic pocket (S1 site) with an asparatic acid residue; (ii) a hydrophobic pocket (S4 site) is the binding site of the adamantyl group; (iii) the carboxylate group of the linker contributes to the selectivity for FXa against thrombin. Thus, the combination of the knowledge of the X-ray crystal structure of the target molecule with MCSS and CAVEAT linker search techniques proved to be an effective hit-finding method that does not require the screening of huge compound libraries.     

Remote sensing system for spatial electric field strength using free space light transmission

Most of the breakdowns in an electric power system are caused by lightning to the tower used for high‐voltage transmission wires. To avoid accidents due to lightning, it would be desirable to develop a measurement system for the spatial electric field distribution around the tower. We have developed a new system that can measure the electric field around the steel tower for electric power transmission by using an optical electric sensor. In conventional methods, the sensor is generally illuminated by light transmitted by optical fibers. On the other hand, the new measurement system illuminates the Pockels sensor directly by using a laser to measure the far electric field. Furthermore, our newly proposed feedback system makes it possible to measure the spatial electric field without concern for the change of Pockels sensor's operation point influenced by temperature change. This system is applicable as a remote sensing system to monitor the spatial electric field around a high‐voltage transmission line. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(2): 10–19, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20552     

Vibration Suppression of a Flexible Shaft With a Simplified Bearingless Induction Motor Drive

In this paper, we present new strategies of vibration suppression in flexible shaft of a motor with active and passive magnetic forces. Shaft magnetic damping originates from the principle of a bearingless motor having a radial magnetic force generation. Radial force is used for shaft vibration suppression to go through the first critical speed. Simplifications are described in a suppression force system. We propose the elimination of a power source with self-excitation, as well as the elimination of sensors, controllers, and inverters, although the effectiveness is limited.     

A method of determining the advanced angle of square-wave currentsin a bearingless switched reluctance motor

Bearingless switched reluctance motors, which can control rotor radial positions with magnetic force, have been proposed. These motors have combined the characteristics of switched reluctance motors and magnetic bearings. This paper proposes a method of determining the advanced angle of square-wave currents in a bearingless switched reluctance motor. Under any torque condition, from no load to full load, stable operation is realized by controlling the advanced angle of square-wave currents with the proposed method. It is shown experimentally that the proposed method is effective in realizing stable operation     

Characterization of endogenous enzymes of milled rice and its application to rice cooking

The relationship between the activities of endogenous enzymes in milled rice and accumulation of chemical components in the rice grains during cooking was investigated. Maltose and soluble starch were optimally hydrolyzed around 60 °C by both crude extracts and purified α-glucosidases of milled rice. Gelatinization onset temperature of rice flour was determined to be 63 °C with DSC analysis under usual cooking condition. Hydrolytic activities on carbohydrates and proteolytic activities of milled rice were enhanced at pH 5 compared to pH 7 at the range of 4–80 °C. When rice was cooked at pH 5, glucose and amino acids highly accumulated with soaking for 16 h before heating. We propose a new method of cooking with prolonged soaking at acidic pH, which is effective for increasing the amounts of chemical components in cooked rice.     

BLM (the causative gene of Bloom syndrome) protein translocation into the nucleus by a nuclear localization signal

Bloom syndrome (BS) is a rare genetic disorder characterized by small body size, sun sensitivity, immunodeficiency and a high predisposition to various types of cancer. BLM was identified as the causative gene for BS, and BLM protein is homologous to DNA helicase. There are two putative nuclear localization signals (NLSs) within amino acid residues 1334-1349 in the C-terminus of the BLM protein, which has the distinctive structure of two basic residue arms separated by a spacer. The entire coding or deleted BLM sequences of various sizes were ligated into an enhanced green fluorescent protein (EGFP) vector and transfected into HeLa cells. The EGFP vector harboring the entire BLM coding sequence was transported to the nucleus. The BLM protein truncated at 1341 amino acid, containing an intact helicase domain and only one proximal arm, was not transported to the nucleus. The BLM protein truncated at 1357 amino acid, containing an intact helicase domain and two arms, was transported to the nucleus. The EGFP vector harboring DNA fragments encoding a protein having only the distal arms of basic amino acids in the C-terminus was also transported to the nucleus. The truncated BLM proteins corresponding to previously reported mutated BLM proteins were retained in the cytoplasm or both the cytoplasm and the nucleus as was the EGFP vector with no insert. These results show that the BLM protein translocates into the nucleus and that the distal arm of the bipartite basic residues in the C-terminus of the BLM protein is essential for targeting the nucleus.