Mechanical improvement of hydroxyapatite by TiO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> nanoparticles deposition

Deposition of Ti was carried out by laser ablation onto hydroxyapatite porous discs in an Ar atmosphere. Ti nanoparticles were deposited onto HAp surface in order to modify its roughness and morphology as it is observed by scanning electron microscopy (SEM) and scanning probe microscopy (SPM). A homogeneous distribution of Ti over the disc surface was corroborated by elemental mapping. A comparison of the hydroxyapatite hardness before and after deposition was performed using SPM nanoindentation. Transmission Electron Microscopy (TEM) showed that the Ti nanoparticles obtained were covered by an oxygen shell. It is shown that surface modifications of the covered HAp by Ti result in better mechanical properties, reducing the possible damage to the HAp ceramic by friction or impacts as it often happens in meniscus, bone junctions and the inclusion of prosthesis for human treatments.     

Low temperature and strain rate dependence of fracture stress and fracture toughness on thin Fe40Ni40B20 amorphous ribbon

The fracture stress and the critical stress intensity factor of the Fe₄₀Ni₄₀B₂₀ amorphous metallic ribbons 20 μm thick were measured in the temperature range 4.2–300 K and at deformation rates from 3.3×10⁻⁶ to 1.25×10⁻³ m⁻¹ with the aim to obtain more information on the condition for the onset and development of the inhomogeneous plastic deformation and fracture.     

Efficient and accurate approach for powder compaction problems

 In this paper, a new approach for powder cold compaction simulations is presented. A density-dependent plastic model within the framework of finite strain multiplicative hyperelastoplasticity is used to describe the highly nonlinear material behaviour; the Coulomb dry friction model is used to capture friction effects at die-powder contact; and an Arbitrary Lagrangian–Eulerian (ALE) formulation is used to avoid the (usual) excessive distortion of Lagrangian meshes caused by large mass fluxes. Several representative examples, involving structured and unstructured meshes are simulated. The results obtained agree with the experimental data and other numerical results reported in the literature. It is shown that, contrary to other Lagrangian and adaptive h-remeshing approaches recently reported for this type of problems, the present approach verifies the mass conservation principle with very low relative errors (less than 1% in all ALE examples and exactly in the pure Lagrangian examples). Moreover, thanks to the use of an ALE formulation and in contrast with other simulations, the presented density distributions do not present spurious oscillations. Received: 20 March 2002 / Accepted: 15 October 2002 The partial financial support of the Ministerio de Ciencia y Tecnología (grant number DPI 2001-2204) is gratefully acknowledged.     

Microstructural and textural characterization of a hot-rolled IF steel

The present paper reports the experimental results on the microstructural and textural characterization of a hot-rolled IF steel. The IF steel was hot-rolled in multiple passes in the austenitic field (1,070 °C) followed by air-cooling. SEM, TEM, and LOM were used to image the microstructure of the material. The global texture was determined by X-ray diffraction (XRD) technique. The mesotexture of selected regions was investigated by electron backscatter diffraction (EBSD). Results show the presence of a diffuse (nearly random) and weak texture in the hot-band that consists of recrystallized polygonal grains and subgrains. The fraction of boundaries with misorientations comprised in the interval 2° ≤ ψ < 15° was found to be lower than 5%. It can be concluded that these low angle boundaries and the presence of subgrains can be associated to the existence of a few areas softened by recovery during or after hot rolling in austenitic field.     

Synthesis and characterization of poly(N-propionyl)iminoethylene

Summary The cationic polymerization of 2-ethyl-2-oxazoline using CH₃I as initiator at different monomer/initiator ratios, temperatures, solvents and times of polymerization was carried out. The effect of these variables on the polymerization yield and viscosity of the polymers was studied. The poly(N-propionyl)iminoethylene was hydrolyzed in acid medium obtaining a linear poly(ethyleneimine) (PEI). All the polymers were characterized by elemental analysis, IR,¹H NMR, and¹³C NMR spectroscopy.     

The opening speech by Dr. Carlos Dotres Martínez. International Course on Dengue and Hemorrhagic Dengue in the Americas, Instituto de Medicina Tropical "Pedro Kourí", 14 August 1995

The authors report one case of multiple bilateral hydatid cyst of kidney associated to brain and spleen localizations, after intra cardiac rupture. They point out the rarity of the bilateral kidney localization of hydatidosis, explain the dissemination mode, and stress the role of computed tomography for the pre-operative diagnosis. The treatment is above all surgical and adapted to each case. The post-operative results are satisfying. Complementary medical treatment could be useful.     

Long-term follow-up of immunosuppressive treatment for obstructive airways disease after allogeneic bone marrow transplantation

BACKGROUND: Locally advanced thyroid cancer invading the tracheal cartilage represents a difficult treatment dilemma during thyroidectomy. METHODS: A retrospective chart review was performed to determine the results of laryngotracheal resection or tracheal cartilage shave with adjuvant radiotherapy in patients with locally advanced thyroid cancer invading the upper airway. RESULTS: Of 597 patients undergoing thyroidectomy for thyroid cancer, 40 were found to have laryngotracheal invasion. Thirty-five patients with superficial invasion underwent cartilage shave procedures with adjuvant radiotherapy; five with full-thickness invasion underwent radical resection, including tracheal sleeve resection (n = 3) or total laryngectomy (n = 2). Histologic subtypes included papillary (n = 32), follicular (n = 2), Hurthle cell (n = 1), medullary (n = 3), and anaplastic (n = 2). Of the cartilage shave group, 25 are currently alive with no evidence of disease at a mean follow-up of 81 months (range 1-290). Six developed isolated local/regional recurrence and were managed with total laryngectomy (n = 1), tracheal resection (n = 1), cervical lymphadenectomy (n = 1), or repeat radiotherapy (n = 3). All six patients remain free of disease at a mean follow-up of 5 years. Of those who underwent initial laryngotracheal resection, four remain free of disease at a mean follow-up of 5 years. The rates of 10-year disease-free survival and overall survival for all patients were 47.9% (95% confidence interval [CI] 24.8, 71.0) and 83.9% (95% CI 70.3, 97.5), respectively. CONCLUSIONS: These data suggest that adequate management of thyroid cancer with laryngotracheal invasion can be achieved with a more conservative surgical approach and adjuvant radiotherapy, reserving more radical resections for extensive primary lesions or locally recurrent disease.     

secG and temperature modulate expression of azide-resistant and signal sequence suppressor phenotypes of Escherichia coli secA mutants

SecA is a dynamic protein that undergoes ATP-dependent membrane cycling to drive protein translocation across the Escherichia coli inner membrane. To understand more about this process, azide-resistant (azi) and signal sequence suppressor (prlD) alleles of secA were studied. We found that azide resistance is cold sensitive because of a direct effect on protein export, suggesting that SecA-membrane interaction is regulated by an endothermic step that is azide inhibitable. secG function is required for expression of azide-resistant and signal sequence suppressor activities of azi and prlD alleles, and in turn, these alleles suppress cold-sensitive and export-defective phenotypes of a secG null mutant. These remarkable genetic observations support biochemical data indicating that SecG promotes SecA membrane cycling and that this process is dependent on an endothermic change in SecA conformation.