Application of membrane separation processes in petrochemical industry: a review

In this paper a general review on different membrane processes and membrane reactors was done. As the main aim of this paper is to review the application of membrane processes in petrochemical industry, processes such as olefin/paraffin separation, light solvent separation, solvent dewaxing, phenol and aromatic recovery, dehydrogenation, oxidative coupling of methane and steam reforming of methane were discussed in detail. Besides, separation using polymer-inorganic nano composite membranes and wastewater treatment using membrane bio-reactors were reviewed.     

Polyacrylamides revisited: flocculation of kaolin suspensions and mature fine tailings

A series of acrylamide‐based water‐soluble (co)polymers was synthesized and they were investigated as flocculants of model kaolin suspensions and mature fine tailings of oil sands. The effects of molar mass, charge density, and polymer concentration on flocculation efficiency were studied by monitoring the initial settling rate during sedimentation. Hydrolyzed polyacrylamide (HPAM) with high molar mass and intermediate acrylic acid contents (0.14–0.41 mol/mol (14–41 mol%)) performed better in flocculation tests on kaolin suspensions requiring lower dose for maximum initial settling rate than native polyacrylamide (PAM). Surface force measurements showed that at low polymer concentrations (1 ppm), the partially‐adsorbed polymer induced a bridging attraction between the mica surfaces. Increasing the polymer concentration to 10 and 50 ppm caused purely repulsive forces. The presence of anionic groups in HPAM led to stronger repulsion, which was also demonstrated by the higher viscosity and larger hydrodynamic radius of the charged polymer. The charge‐induced increase in the viscosity of polymer solutions was suppressed by the screening effect of salts in a buffer solution and reducing the viscosity is desirable in the injection of flocculants in the industrial process.     

Continuous Application of Polyglycerol‐Supported Salen in a Membrane Reactor: Asymmetric Epoxidation of 6‐Cyano‐2,2‐dimethylchromene

In the current work, suitability of hyperbranched polyglycerol as a high loading catalyst support is demonstrated. A polyglycerol‐supported manganese‐salen complex (chemzyme) is applied as a homogeneous catalyst in the epoxidation of 6‐cyano‐2,2‐dimethylchromene. The recyclability of the corresponding catalyst was investigated in repetitive batch experiments as well as a continuous operation of the reaction in an ultrafiltration membrane reactor. An enhanced stability of the catalyst in repetitive batches was observed as a result of immobilization whereby the total turnover number increased from 23 in a single batch to 80 in four repetitive batches. To enable continuous operation, a continuously operated, stirred tanked reactor (CSTR) was equipped with an ultrafiltration membrane (MPF‐50) and a retention of 98% was determined. The continuous chemzyme membrane reactor was operated over the course of 20 residence times. After approximately 12 residence times, the steady state was reached yielding 70% conversion as well as an enantiomeric excess up to 92%. A space‐time yield (sty) of 458 g L ⁻¹ d⁻¹ and a turnover frequency (TOF_reaction) of up to 18 h⁻¹ was reached in the steady state. It was determined that the total turnover number (TTN) was enhanced by a factor of 10 from 24 (batch) up to 240 for 20 residence times in CSTR operation.     

Crystallinity of biodegradable polymers reinforced with functionalized carbon nanotubes

Well-dispersed multiwall carbon nanotubes (MWCNTs) were prepared by grafting poly(L-lactide-co-ε-caprolactone) (PLACL) biodegradable copolymer onto the sidewall of hydroxylated MWCNTs using oligomeric L-lactide (LA) and ε-caprolactone (CL). After preparation of MWCNT/PLACL composites, the effect of functionalized MWCNTs on crystallinity of PLACL was investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and polarized light optical microscopy (POM). The surface functionalization effectively improved the dispersion and adhesion of MWCNTs which acted as reinforcing filler in the PLACL polymer matrix and hence improved the physical and thermomechanical properties of the nanocomposites. The glass transition temperature (T _g) and the crystallinity of nanocomposites decreased in comparison with those of neat PLACL when the concentration of functionalized MWCNTs in nanocomposites was 0.5 wt%. With further increment in concentration of functionalized MWCNTs, the T _g of composites increased until the T _g of neat PLACL, and also the crystallinity of composites increased. The functionalized MWCNTs have no significant effect on the melting point of nanocomposites. The MWCNTs acted as heterogeneous nucleation points and increased the lamella size and therefore the crystallinity of PLACL. Furthermore, the larger agglomerated clusters of both kinds of MWCNTs (i.e., MWCNT-grafted-PLACL and pristine MWCNTs) are more effective than small clusters as nucleation points for growing the spherulites.     

Novel composite nanofibers based on polyamide 66/graphene oxide- grafted aliphatic- aromatic polyamide: preparation and characterization

New polyamide 66/graphene oxide (GO)-grafted aliphatic-aromatic polyamide (polyamide-imide) (PAI) (PA66/GOF) composites nanofibers were successfully prepared via electrospinning method for the first time. An polyamide imide (PAI) was synthesized using polycondensation reaction from a dicarboxylic acid and a diamine based on 4,4′-(4,4′-isopropylidenediphenyl-1,1′-diyldioxy) dianiline, and characterized by ¹HNMR and FTIR. Morphological, structural, thermal and mechanical characteristics of the nanocomposite fibers were investigated by means of SEM, TEM, WAXD, DMTA and TGA techniques. Composites nanofibers of PA66/GO, PA66/PAI and PA66/GOF with smooth surface, uniform structure as well as with diameter ranging from 195 to 784 nm were obtained. The GO incorporation caused a reduction in the nanofibers diameters. The TEM images showed that the GO was well dispersed in the PA66 nanofibers without significant aggregation. An approximately 10 °C temperature increase in the glass transition temperature of PA66 was achieved by addition of 0.5 wt% of PAI, resulting from aliphatic-aromatic structure of PAI. By the TGA results, an increase about 40 °C was observed in the thermal stability of PA66/PAI composite nanofibers in comparison with that of pure PA66 nanofibers.     

Characterization of the Ion Beam Current Density of the RF Ion Source with Flat and Convex Extraction Systems

Silicon - The characterization of ion beam current density distribution and beam uniformity is crucial for improving broad-beam ion source technologies. The design of the broad ion beam extraction...     

Characterization of minocycline loaded chitosan/polyethylene glycol/glycerol blend films as antibacterial wound dressings

Wound care has been a challenging subject for medical teams and researchers. Bacterial infections are one of the most serious complications in injured skins that often affect healing process. Antibacterial wound dressings can be used to facilitate wound healing process. The purpose of this study is to fabricate chitosan (Chito)/polyethylene glycol (PEG) antibacterial wound dressing doped with minocycline, and to evaluate the influence of composition ratio on the blending properties of the films. To improve the mechanical properties of these films, we examined various amounts of glycerol as a plasticizer. Moreover, we investigated morphological and mechanical aspects, water uptake, degradation, water vapor transmission and wettability properties of the films prepared with various ratios of Chito/PEG/Gly. Assessment of mechanical properties revealed that film containing 80:20 ratio Chito/PEG with 40 PHR Gly content exhibits the highest ultimate tensile strength and elongation at break (9.74 MPa and 45.73% respectively). Furthermore, results demonstrated that upon increasing PEG and Gly contents, degradability and hydrophilicity of the films increased whereas water uptake decreased. Water vapor transmission rate of the films was close to the range of 530–1200 g/m²d, indicating that the as formed films are possible candidates for dressing low exudate wounds or burns. Minocycline loaded films exhibited a biphasic drug release profile and it was more effective on gram-positive bacteria than on gram-negative bacteria. The polymeric film with the highest amount of loaded drug (2%) exhibited insignificant cytotoxicity (88%) against normal fibroblast cell line.     

Polyphenol-rich seaweed (Eucheuma cottonii) extract suppresses breast tumour via hormone modulation and apoptosis induction

The edible red seaweed Eucheuma cottonii is abundantly cultivated for carrageenan production. This study investigated the effects of dietary E. cottonii polyphenol-rich extract (ECME) on breast cancer. In vitro assays showed that ECME was antiproliferative against oestrogen-dependent MCF-7 and oestrogen-independent MB-MDA-231 human breast-cancer cells (IC₅₀ values of 20 and 42 μg/ml, respectively) but was non-toxic to normal cell lines. The ECME (150 and 300 mg/kg BW) was fed to female rats and, after 4 weeks, rat mammary tumour was induced using LA7 cells (inoculated subcutaneously). The ECME inhibited tumour development and erythrocyte lipid peroxidation in the cancer-induced rats, dose-dependently. It showed anti-oestrogenic effects on the rat estrous cycle and serum hormone levels. Electron microscopy and histopathology observations confirmed apoptosis in the rat mammary tumours. The polyphenol-rich ECME was tumour-suppressive via apoptosis induction, downregulating the endogenous oestrogen biosynthesis, and improving antioxidative status in the rats.     

Experimental Study and Mathematical Modeling of NO Removal Using the UV/H2O2 Advanced Oxidation Process

An experimental study on NO removal via UV/H₂O₂ process was conducted in a semi‐continuous bubble‐column reactor and the effect of some operation parameters including NO initial concentration and gas flow rates on removal efficiency was investigated. Applying UV light increased the efficiency significantly. The steady‐state removal efficiency was found to be higher at the lower gas flow rates. The bubble size as an important factor in mass transfer calculations and modeling procedure was determined at different gas flow rates using bubble photographs and image processing technique. In the ranges of flow rates studied here, the gas flow rate had no significant effect on the bubble diameter. A mathematical model was developed to describe the NO removal process. The model predictions were compared with existing experimental data, confirming a good agreement of the data.