Inhibition of oxidation in 10% oil-in-water emulsions by β-carotene with α- and γ-tocopherols

The effects of low concentrations of β-carotene, α-, and γ-tocopherol were evaluated on autoxidation of 10% oil-in-water emulsions of rapeseed oil triacylglycerols. At concentrations of 0.45, 2, and 20 μg/g, β-carotene was a prooxidant, based on the formation of lipid hydroperoxides, hexanal, or 2-heptenal. In this emulsion, 1.5, 3, and 30 μg/g of γ-tocopherol, as well as 1.5 μg/g of α-tocopherol, acted as antioxidants and inhibited both the formation and decomposition of lipid hydroperoxides. Moreover, at a level of 1.5 μg/g, γ-tocopherol was more effective as an antioxidant than α-tocopherol. At levels of 0.5 μg/g, both α- and γ-tocopherol significantly inhibited the formation of hexanal but not the formation of lipid hydroperoxides. Oxidation was effectively retarded by combinations of 2 μg/g β-carotene and 1.5 μg/g γ- or α-tocopherol. The combination of β-carotene and α-tocopherol was significantly better in retarding oxidation than α-tocopherol alone. While γ-tocopherol was an effective antioxidant, a synergistic effect between β-carotene and γ-tocopherol could not be shown. The results indicate that there is a need to protect β-carotene from oxidative destruction by employing antioxidants, such as α- and γ-tocopherol, should β-carotene be used in fat emulsions.     

Embodied Robot versus Virtual Agent: Involvement of Preschool Children in Motor Task Performance

Embodied robots are known to be preferable in most cases to their virtual agents for interaction with and performance by human subjects. This study compared the efficacy of an embodied robot-coacher and its virtual agent in involving preschool children in the performance of playlike motor tasks. The robot or its virtual agent demonstrated movements, asked the children to repeat them, and provided positive feedback on their performance. The difficulty of the motor tasks was increased over the course of the session. Two groups of children were studied, one of them with and the other without previous experience of interaction with the embodied robot. In the experienced group, involvement in motor tasks was successfully induced by both the embodied robot and its virtual agent, but the children interacted less well with the virtual agent than with the embodied robot. Children in the inexperienced group did not interact at all during the experiment with the virtual agent. Because participants in the experiment were preschool children in their natural environment, this study proposes the combined use of an embodied robot and its virtual agent for motor involvement.     

Hydrogen effect on the molecular weight distribution of polymers obtained by polymerization of ethylene and α-olefins over supported titanium-magnesium catalysts

Comparative data on the molecular weight distribution of polymers obtained by polymerization of ethylene, propylene and 1-hexene, and copolymerization of ethylene with α-olefins over the titanium-magnesium catalysts (TMC) in the absence and presence of hydrogen are presented. In contrast to the ethylene polymerization, in the cases of propylene and 1-hexene polymerization and copolymerization of ethylene with α-olefins, the hydrogen addition is characterized by noticeable narrowing of the molecular weight distribution (MWD) due to lower contribution of the MWD component with high molecular weight. This result is an evidence of the increased reactivity of TMC active sites producing high molecular weight poly-α-olefins and copolymers of ethylene with α-olefins in the chain transfer reaction with hydrogen. It is suggested that the increased reactivity of these sites in the transfer reaction with hydrogen appears after the 2,1-addition of α-olefin to the growing polymer chain.     

The influence of poly(3,4-ethylenedioxythiophene) modification on the transport properties and fuel cell performance of Nafion-117 membranes

Nafion-117/PEDOT composite membranes were synthesized by in situ chemical polymerization of 3,4-ethylenedioxythiophene (EDOT) using ammonium persulfate as an oxidant. The polymerization of EDOT in Nafion membranes for various EDOT/oxidant treatment sequences was studied for the first time. PEDOT introduction leads to a slight decrease in both the ion-exchange capacity and water uptake of the composite membranes, as well as to an increase in cationic transport. Membranes initially treated with an oxidant exhibit better conductivity and lower hydrogen permeability. The effect of both modification of Nafion-117 membranes by PEDOT and hot-pressing of hydrogen-oxygen membrane-electrode assemblies (MEAs) on the performance of proton-exchange membrane fuel cells was studied. The maximum power density of the fabricated MEAs increases 1.5-fold: from 510 (for a pristine Nafion-117 membrane) to 810 mW cm⁻² (for a membrane modified by PEDOT). The current density at a voltage of 0.4 V reaches 1248 and 2246 mA cm⁻², respectively.     

Microstructure of a nitrided steel previously decarburized

In this study the effects of a surface-controlled decarburization on the structure of a nitrided steel are analyzed. Samples of a quenched and tempered 42CrMo4 steel were decarburized by heating in air at different depths and submitted to gaseous nitriding. After decarburization and nitriding, the microstructure of surface layers was investigated by optical microscopy (OM) and scanning electron microscopy (SEM). The nitrogen and carbon profiles in the diffusion layers were determined by SEM equipped with a wavelength dispersive spectrometer (EPMA-WDS) and by glow discharge optical spectrometry (GDOS). The effect of nitriding was determined by microhardness measurements. Our results indicate that a previous decarburization only slightly affects the surface hardness, but reduces the conventional nitriding depth. The decarburization also favors the nitrogen take-up and produces increased nitrogen concentrations in the compound layer and in the narrow zone beneath it.     

Coreference resolution: an empirical study based on SemEval-2010 shared Task 1

This paper presents an empirical evaluation of coreference resolution that covers several interrelated dimensions. The main goal is to complete the comparative analysis from the SemEval-2010 task on Coreference Resolution in Multiple Languages. To do so, the study restricts the number of languages and systems involved, but extends and deepens the analysis of the system outputs, including a more qualitative discussion. The paper compares three automatic coreference resolution systems for three languages (English, Catalan and Spanish) in four evaluation settings, and using four evaluation measures. Given that our main goal is not to provide a comparison between resolution algorithms, these are merely used as tools to shed light on the different conditions under which coreference resolution is evaluated. Although the dimensions are strongly interdependent, making it very difficult to extract general principles, the study reveals a series of interesting issues in relation to coreference resolution: the portability of systems across languages, the influence of the type and quality of input annotations, and the behavior of the scoring measures.     

METIS-II: low resource machine translation

METIS-II was an EU-FET MT project running from October 2004 to September 2007, which aimed at translating free text input without resorting to parallel corpora. The idea was to use “basic” linguistic tools and representations and to link them with patterns and statistics from the monolingual target-language corpus. The METIS-II project has four partners, translating from their “home” languages Greek, Dutch, German, and Spanish into English. The paper outlines the basic ideas of the project, their implementation, the resources used, and the results obtained. It also gives examples of how METIS-II has continued beyond its lifetime and the original scope of the project. On the basis of the results and experiences obtained, we believe that the approach is promising and offers the potential for development in various directions.     

Experimental characterization of electrostatically actuated in-plane bending of microcantilevers

Experimental validation of numerical models developed by the authors to predict the static behaviour of microelectrostatic actuators is described. Cantilever microbeams, currently used in connection with RF-MEMS and micro-scale material testing were analysed. A set of microcantilevers, bending in the plane of the wafer, i.e. in the same plane as the profiling system’s target, was tested. This differs from the popular case of out-of-plane microbeams, usually studied in the literature. Geometry nonlinearity caused by large deflection of the microbeam was investigated and nonlinear coupled formulation of electromechanical equilibrium was performed. Coupled-field analysis was implemented using the Finite Element Method (FEM), to predict displacements and pull-in voltage measured by Fogale Zoomsurf 3D, subsequently plotting the displacement-versus-voltage curve to complete model validation. FEM nonlinear analysis, based on iterative approach with mesh morphing, and FEM non-incremental approach, including a special element proposed by the authors, are compared to the linear solution and to experimental results. Geometry nonlinearity appears relevant in microbeam modelling and requires a nonlinear solution of the coupled problem. Investigative work, which compared the results of 2D and 3D models to experimental data, revealed that some three dimensional effects are significant in model validation, but the 2D approach may be effective in predicting static behaviour provided that at least a microbeam thickness equivalent is adopted.     

An integral system‐ergonomic approach for IT‐based process management in complex work environments by example of manufacturing and health care

Recent trends in manufacturing and health care move these two work systems closer together from a system ergonomics point of view. Individual treatment of products, especially patients, by specialists in a distributed environment demand information technology (IT)‐based support suitable for complex systems. IT‐based support of processes in complex systems is difficult due to the lack of standard processes. IT support also means to rethink processes to use efficiency potentials. Close cooperation of users and software developers is needed to increase the ergonomic quality of the system. Therefore, suitable tools are needed: UML is available as the standard industry modeling language, Zope/Plone as the quasi‐standard for content management systems, SimPy as an object‐oriented simulation tool for event‐triggered processes, and ACT‐R as a powerful cognitive architecture for simulation of human information processes. The integration of these tools enables system‐ergonomic support of processes in the complex work system as well as of the development and deployment process. It is the base of an integral system‐ergonomic approach for IT‐based process management. Knowledge gained during process analysis either enters models or leads to the extension and adaptation of the tool chain. The models serve as basis for discussion among system ergonomists, programmers, and specialists from the work system. Further, they are understood by simulation and process support tools. Transcoding efforts between humans with different professional backgrounds and machines are reduced, and the flexibility demanded by complex systems is met. © 2008 Wiley Periodicals, Inc.     

Robust network monitoring in the presence of non-cooperative traffic queries

We present the design of a predictive load shedding scheme for a network monitoring platform that supports multiple and competing traffic queries. The proposed scheme can anticipate overload situations and minimize their impact on the accuracy of the traffic queries. The main novelty of our approach is that it considers queries as black boxes, with arbitrary (and highly variable) input traffic and processing cost. Our system only requires a high-level specification of the accuracy requirements of each query to guide the load shedding procedure and assures a fair allocation of computing resources to queries in a non-cooperative environment. We present an implementation of our load shedding scheme in an existing network monitoring system and evaluate it with a diverse set of traffic queries. Our results show that, with the load shedding mechanism in place, the monitoring system can preserve the accuracy of the queries within predefined error bounds even during extreme overload conditions.