Membrane-bound calmodulin in Xenopus laevis oocytes as a novel binding site for melatonin

Melatonin has been suggested as a physiological antagonist of calmodulin. In this work, we have characterized melatonin binding sites in Xenopus laevis oocyte membranes. Binding of [125I]melatonin by X. laevis oocyte membranes fulfills all criteria for binding to a receptor site. Binding was dependent on time, temperature, and membrane concentration and was stable, reversible, saturable, and specific. The binding site was also pharmacologically characterized. Stoichiometric studies showed a high-affinity binding site with a Kd of 1.18 nM. These data are in close agreement with data obtained from kinetic studies (Kd=0.12 nM). In competition studies, we observed a low-affinity binding site (Kd=63.41 microM). Moreover, the binding site was characterized as calmodulin. Thus, binding was dependent on calcium and blocked by anti-CaM antibodies in a concentration-dependent manner. Calmodulin inhibitor chlorpromazine also inhibited binding of the tracer. From these results, it is suggested that membrane-bound calmodulin acts as a melatonin binding site in Xenopus laevis oocytes, where it might couple cellular activities to rhythmic circulating levels of melatonin. This hypothesis correlates with the previous findings describing melatonin as a physiological antagonist of calmodulin.     

Hydrodechlorination of 3-chloropyridine and chlorobenzene in methanol solution over alkali-modified zirconia-supported palladium catalysts

The liquid-phase hydrodechlorination of 3-chloropyridine and chlorobenzene has been studied over alkali-modified zirconia-supported palladium catalysts. The modification of the ZrO₂ with alkali metal carbonates improves the catalytic activity of the final palladium catalyst. Therefore, the larger the ionic radii (Li⁺ < Na⁺ < K⁺), the greater the catalytic activity (TOF) of the palladium catalyst. For 3-chloropyridine, hydrodechlorination proceeds without catalyst deactivation. This is explained as the result of the interaction of reaction products (pyridine and HCl) forming pyridinium chloride, thus avoiding the detrimental effect of HCl on the palladium particles. Catalytic hydrodechlorination of chlorobenzene over Pd catalysts exhibits an initial catalytic activity (TOF) much lower than that of 3-chloropyridine and the Pd catalysts deactivate as the reaction proceeds. Finally, chlorobenzene hydrodehalogenation has also been carried out in the presence of an equimolecular amount of pyridine resulting in a decrease in the initial reaction rate on the one hand, but also in an increase in final conversion on the other.     

Infrared and ultraviolet–visible spectroscopic studies of silica, [(Cp)2ZrCl2] and trimethylaluminum interactions

Infrared and UV–vis studies of metallocene immobilization on silica are reported here. The results have indicated changes in the Zr coordination sphere of metallocene depending on the immobilization route used. The reaction of [(Cp)₂ZrCl₂] with silica formed [(Cp)₂ZrCl]⁺[SiO]⁻ species. The same metallocene, reacting with TMA modified silica, formed monomethylated and dimethylated species by the substitution of chloro for methyl ligands, stabilized on the surface by interaction with “MAO-like” species (methylaluminoxane, MAO). These monomethylated and dimethylated cationic zirconium species are the active centers for the polymerization reaction. Different order of TMA addition in the silica modification step generated surface species of a similar nature, differing in their relative quantities. The highest amount of these active species was obtained when the support was added to the TMA solution rather than adding the TMA solution to the silica support. This was the most significant parameter affecting catalytic activity in ethylene polymerization.     

Evaluation and enhancement of COBRA-TF efficiency for LWR calculations

Detailed representations of the reactor core generate computational meshes with a high number of cells where the fluid dynamics equations must be solved. An exhaustive analysis of the CPU times needed by the thermal-hydraulic subchannel code COBRA-TF for different stages in the solution process has revealed that the solution of the linear system of pressure equations is the most time consuming process. To improve code efficiency two optimized matrix solvers, Super LU library and Krylov non-stationary iterative methods have been implemented in the code and their performance has been tested using a suite of five test cases. The results of performed comparative analyses have demonstrated that for large cases, the implementation of the Bi-Conjugate Gradient Stabilized (Bi-CGSTAB) Krylov method combined with the incomplete LU factorization with dual truncation strategy (ILUT) pre-conditioner reduced the time used by the code for the solution of the pressure matrix by a factor of 20. Both new solvers converge smoothly regardless of the nature of simulated cases and the mesh structures and improve the stability and accuracy of results compared to the classic Gauss–Seidel iterative method. The obtained results indicate that the direct inversion method is the best option for small cases.     

Optical and electrical characterization of fluorine doped cadmium oxide thin films prepared by the sol-gel method

Highly transparent and conducting fluorine (F) doped cadmium oxide (CdO) thin films were deposited on glass slides by the sol-gel method. The films were doped by the addition of ammonium fluoride to the precursor solution whose optimum concentration was determined. The films were fired in an open atmosphere at 350 °C and after that, exposed to annealing treatments in different atmospheres (N₂, N₂/H₂ mixture and Ar) at the same temperature. The films were characterized by ultraviolet-visible spectroscopy, X‐ray diffraction and scanning electron microscopy. The resistivity was determined by the four probes method and current-voltage measurements in accordance with the standard Van der Pauw configuration. The CdO:F thin films obtained, showed high polycrystalline quality and high transmission in the visible region (≥ 90%), shifting towards the blue region of the absorption edge as the fluorine concentration in the precursor solution was increased from 0 to 30 at.%. The lowest resistivity values were reached for the samples with F content higher or equal to 5% and annealed in either N₂ or a 96/4 N₂/H₂ gas mixture. Our resistivity value reached in the CdO:F layers was 4.5 × 10^{− 4} Ω cm (20 Ω/square).     

An educational resource for information literacy in higher education: Functional and users analyses of the e-COMS academic portal

As in today’s knowledge society the Internet is playing an important role in the information literacy of university students the goal of this paper is to analyse, after its first year on the Web, the informational impact of an e-learning resource developed by Granada’s University lecturers (the e-COMS educational portal), a pioneer in Spain for training in information literacy. From the objective and subjective data provided by the own portal and by it users, two different and complementary kinds of analysis (functional and users’) are performed. Assessment of various capabilities, among which visibility and usability stand out, is provided. The highly positive but improvable results offer a detailed analysis of the functional aspects of the portal itself and of the users’ relations with this information resource. From these analyses strengths and weaknesses are extracted and some proposals for improvement are derived.     

XPS studies of directly fluorinated HDPE: problems and solutions

X-ray photoelectron spectroscopy (XPS) applied to the study of fluorinated polymer surfaces presents several problems related both to peak assignment and to degradation. In this work, we analyse extensively the question of XPS peak assignments in this kind of surfaces. We conclude that in this kind of surfaces using binding energy differences between fluorine and carbon is better than using absolute binding energies. Also a useful relation between fluorine photoelectron energy vs. polymer composition expressed through the atomic ratio fluorine/carbon (F/C) was found. A protocol for data treatment is proposed and applied to a XPS study of the degradation induced by X-ray on high-density polyethylene surfaces modified by direct fluorination. Results obtained for the degradation, namely the atomic ratio F/C obtained by two different methods, combined with angle resolved X-ray photoelectron spectroscopy (ARXPS) were used to study the fluorine concentration profile in depth, producing self-consistent results.     

Effects of age and schooling on the acquisition of elementary quantitative skills.

The influence of school- and age-related variables was examined separately on 2 tasks involving elementary quantitative skills: conservation of number and mental addition. Performance on these tasks was compared by using a cutoff design with 3 groups of kindergarten and Grade 1 children who differed in age but not amount of schooling (grade), in schooling but not age, or in both age and schooling. The effects of age and schooling were distinct. On conservation of number, performance improved as a function of age but not schooling. On mental arithmetic, accuracy improved with schooling rather than age but children's use of various solution procedures (e.g., retrieval, counting) was not influenced by schooling. Thus, in the domain of elementary mathematical skills, the influence of schooling can be very specific, and age-related variables other than schooling play an important role in the development of elementary mathematical skills. Results illustrate the utility of the cutoff design for investigating instructional and developmental influences on cognitive development. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Energy efficiency, carbon emissions and economic development in Venezuela

Venezuela's vast natural resource base has largely shaped the nation's economic and energy-use patterns. Major opportunities exist for improving the efficiency of energy use in Venezuela and, consequently, restraining the growth of energy-related carbon emissions. This paper presents a detailed report of one potential development path for Venezuela and estimates the ensuing levels of energy demand and CO₂ emissions associated with pursuing this path through the year 2025. The results indicate that by adopting a development strategy that incorporates structural changes in the economy, fuel-switching measures and improved end-use efficiencies, Venezuela can introduce energy efficiency and carbon restraints as part of its economic development process.