An expert PID controller uses refined ziegler and nichols rules and fuzzy logic ideas

This article proposes a scheme for the on-line adjustment of three mode controller settings based on experimental measurements of closed-loop performance. It uses a recently developed heuristic tuning procedure to identify estimated process parameters. This method may give rise to conflicting estimates. Fuzzy Set theory is applied to manage the situation in terms of a fuzzy conjunction to combine the various estimates. PID control was chosen because of its wide use in the industrial environment due to driving simplicity and robustness. The article shows design, development, and computer simulation aspects.     

The lipid composition of selected tissues from a Mediterranean monk seal,Monachus monachus

The lipid composition of blubber, brain, muscle and heart from a Mediterranean monk sealMonachus monachus (an endangered species) were examined to allow comparisons with more common species of seals. Only neutral lipids (mainly triacylglycerols) were detectable in the blubber lipids, whereas polar lipids predominated in the heart and in the brain. Neutral and polar lipids comprised almost equal proportions in both liver and muscle. Choline glycerophospholipids (CGP) were the major polar lipids, followed by ethanolamine glycerophospholipids (EGP) in the liver, heart and muscle. Cerebrosides accounted for 28.8% of the brain lipids. All lipid classes of the liver contained high levels (31–47%) of polyunsaturated fatty acids (PUFA), with the exception of phosphatidylserine. The total proportion of n−6 PUFA exceeded that of n−3 PUFA in all lipid classes of the liver, due mainly to the high levels of 20∶4n−6. The highest level of 20∶4n−6 occurred in phosphatidylinositol, where it comprised 32.4% of the total fatty acids. The CGP and EGP of the brain contained lower levels of PUFA than those of the liver, muscle and heart. Alkenyl ethers accounted for 35.8% of the total long-chain moieties in brain EGP. The fatty acid composition of blubber triacylglycerols differed from those of the lipid classes from other tissues in that it had a very low ratio of n−6 to n−3 PUFA (0.3) as a result of a lower content of 20∶4n−6.     

Is there a role for continuation phase cognitive therapy for depressed outpatients?

Two pilot studies evaluated the rate of relapse or recurrence (i.e., major depressive disorder) after cognitive therapy (CT). Two sequential cohorts included outpatients who responded to acute phase CT (A-CT) and who agreed to monthly, treatment-free follow-up. In Study 1, the Kaplan-Meier technique estimated relapse and recurrence rates of 40% at 6 months, 45% at 8 months, 50% at 12 months, 67% at 18 months, and 74% at 24 months. In Study 2, responders to A-CT received 8 months (10 sessions) of continuation phase CT (C-CT). In Study 2, relapse or recurrence was 20% at 6 and 8 months, 27% at 12 months, and 36% at 18 and 24 months after A-CT. An exploratory log-rank test showed that relapse or recurrence-free survival was greater in Study 2 than in Study 1. If replicated, this result suggests that C-CT can reduce depressive relapse or recurrence. Alternative explanations are presented. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Expressing the equivalence of non‐isothermal and isothermal heat sterilization processes

Currently, the sterility of heat‐processed food and pharmaceuticals is assessed in terms of an F₀ value, based on the equivalence of the heat treatment to an isothermal process at a reference temperature. This F₀ value, however, has a meaning if, and only if, the inactivation kinetics of the targeted spores (or cells) follow a first‐order relationship and the temperature dependence of the D value, the reciprocal of the rate constant, is log‐linear. There is growing evidence that these conditions are not satisfied by many spores, including those of Clostridium botulinum and vegetative cells. Consequently, a replacement for the F₀ value is proposed in the form of a momentary equivalent time at the reference temperature based on the actual survival pattern of the spores, which need not be log‐linear. This equivalent time can be calculated together with the theoretical survival ratio in real time, thus enabling an operator to monitor the lethality of ongoing industrial heat processes. The concept is demonstrated with published survival data of C. botulinum, for which the Weibullian and log‐logistic models served as primary and secondary models, respectively. The safety factor according to the proposed method is in the number of added minutes of processing, beyond the theoretical time needed to reduce the survival ratio of the targeted spores or cells to a level that would produce practical (or commercial) sterility. Copyright © 2006 Society of Chemical Industry     

Exfoliation and related microstructures in 2024 aluminum body skins on aging aircraft

Exfoliation, a directional attack along elongated grain boundaries, has been examined in some detail in rolled 2024 aluminum sheet and plate for KC-135 aging aircraft body skin samples utilizing optical (light) metallography, scanning electron microscopy, and transmission electron microscopy. A detailed analysis and comparison of precipitates within the grains and in the grain boundaries were performed, as well as an examination of elemental depletion profiles across grain boundaries. These observations suggest that corrosion-related anodic sites play a far less significant role in the propagation of exfoliation than do the hard corrosion products creating wedging stresses within the elongated grain boundaries, which seem to demonstrate unique and unusual structural or energetic features or both.     

News: United Kingdom to set air quality emission standards

Government.     

Solid state reactions in the Fe2O3-CaCO3-In2O3 system

The kinetics of solid-state reactions of powdered reactants were investigated by X-ray and by differential thermogravimetry in a magnetic field. Measurements revealed mutual diffusion of the Fe³⁺ and In³⁺ ions in the Fe₂O₃-In₂O₃ system heat treated for 3 h at 700 to 1400° C. Diffusion of indium into the Fe₂O₃ lattice caused a shift of the Curie temperature of the antiferromagnetic iron oxide towards lower temperatures. Only Caln₂O₄ was found between CaCO₃ and In₂O₃ up to 1400° C. Also, in the Fe₂O₃-CaCO₃-In₂O₃in system, the reaction started with the mutual diffusion of iron and indium and the forming of CaFe₂O₄. End-products were the magnetic -Ca₄Fe₁₄O₂₅ and CaFe₄O₇, and the non-magnetic CaFe₅O₇, depending on the In³⁺ concentration. Indium stabilized the magnetic calcium-iron oxide structures, shifting their Curie temperatures towards lower values.     

A multi-objective approach for the motion planning of redundant manipulators

Kinematic redundancy occurs when a manipulator possesses more degrees of freedom than those required to execute a given task. Several kinematic techniques for redundant manipulators control the gripper through the pseudo-inverse of the Jacobian, but lead to a kind of chaotic inner motion with unpredictable arm configurations. Such algorithms are not easy to adapt to optimization schemes and, moreover, often there are multiple optimization objectives that can conflict between them. Unlike single optimization, where one attempts to find the best solution, in multi-objective optimization there is no single solution that is optimum with respect to all indices. Therefore, trajectory planning of redundant robots remains an important area of research and more efficient optimization algorithms are needed. This paper presents a new technique to solve the inverse kinematics of redundant manipulators, using a multi-objective genetic algorithm. This scheme combines the closed-loop pseudo-inverse method with a multi-objective genetic algorithm to control the joint positions. Simulations for manipulators with three or four rotational joints, considering the optimization of two objectives in a workspace without and with obstacles are developed. The results reveal that it is possible to choose several solutions from the Pareto optimal front according to the importance of each individual objective.     

Interpretation of long-chain structure from dilute solution properties of ultrahigh molecular weight polymers

Summary Systematic studies on solution properties of ultrahigh molecular weight polymers showed the existence of some special features as compared to usual length polymers. The paper discusses the possible appearance of branched structures in the polymerization process, structures able to influence the mentioned features. From experimental data on poly(methyl methacrylate), poly(butyl methacrylate) and polyacrylonitrile it appears that branching can be excluded, and the very high molecular weight domain considered may be responsible for the modifications observed in the molecular weight dependences on 2>, A₂ or [].     

Electrospun fibers based on porcine plasma: a rheological and morphological study

Iranian Polymer Journal - The present work focuses on the assessment of the ability of porcine plasma protein (PPP) to be electrospun satisfactorily to form fibre mats, and their rheological and...