Predictors of sustained response to alpha interferon therapy in chronic hepatitis C

The short- and long-term creep behaviors of ultra-high-molecular-weight polyethylene (UHMWPE) systems (compression-molded UHMWPE sheets and self-reinforced UHMWPE composites) have been investigated. The short-term (30-120 min) creep experiment was conducted at a load of 1 MPa and a temperature range of 37-62 degrees C. Based on short-term creep data, the long-term creep behavior of UHMWPE systems at 1 MPa and 37 degrees C was predicted using time-temperature superposition and analytical formulas. Compared to actual long-term creep experiments of up to 110 days, the predicted creep values were found to well describe the creep properties of the materials. The creep behaviors of the UHMWPE systems were then evaluated for a creep time of longer than 10 years, and it was found that most creep deformation occurs in the early periods. The shift factors associated with time-temperature superposition were found to increase with increasing temperature, as per the Arrhenius equation. The effects of temperature, materials, and load on the shift factors could be explained by the classical free volume theory.     

Design of adaptive feedforward algorithms using internal model equivalence

The paper investigates the design of adaptive feedforward cancellation (AFC) algorithms with sinusoidal regressors for repetitive control. Such adaptive algorithms are equivalent to linear controllers based on the internal model principle (IMP). Using this equivalence and root locus rules, the phase advance of the regressor of the adaptive algorithm can be chosen to maximize the phase margin at low gains. A surprising result is that selecting the optimal phase advance is equivalent to placing a zero in the open right half-plane in certain cases. A complete design and analysis for the compensation of a single-frequency periodic disturbance is done. A new variation of the AFC algorithm is also developed in which the adaptive portion acts in parallel with a feedthrough term. the IMP equivalent of this algorithm has two zeros instead of one. Analysis and simulation show this method to have superior convergence and robustness properties when compared with the method having no feedthrough term. Discrete time versions of the algorithms are briefly considered.     

The active site of Trichoderma reesei cellobiohydrolase II: the role of tyrosine 169

Trichoderma reesei cellobiohydrolase II (CBHII) is an exoglucanasecleaving primarily cellobiose units from the non-reducing endof cellulose chains. The ß-l,4 glycosidic bond iscleaved by acid catalysis with an aspartic acid, D221, as thelikely proton donor, and another aspartate, D175, probably ensuringits protonation and stabilizing charged reaction intermediates.The catalytic base has not yet been identified experimentally.The refined crystal structure of CBHII also shows a tyrosineresidue, Y169, located close enough to the scissile bond tobe involved in catalysis. The role of this residue has beenstudied by introducing a mutation Y169F, and analysing the kineticand binding behaviour of the mutated CBHII. The crystal structureof the mutated enzyme was determined to 2.0 Å resolutionshowing no changes when compared with the structure of nativeCBHII. However, the association constants of the mutant enzymefor cellobiose and cellotriose are increased threefold and for4-methylumbelliferyl cellobioside over 50-fold. The catalyticconstants towards cellotriose and cellotetraose are four timeslower for the mutant. These data suggest that Y169, on interactingwith a glucose ring entering the second subsite in a narrowtunnel, helps to distort the glucose ring into a more reactiveconformation. In addition, a change in the pH activity profilewas observed. This indicates that Y169 may have asecond rolein the catalysis, namely to affect the protonation state ofthe active site carboxylates, D175 and D221.     

Custody evaluation practices: A survey of experienced professionals (revisited).

W. G. Keilin and L. J. Bloom (1986) explored 70 issues related to child custody evaluation practices. The current study replicates Keilin and Bloom's study and looks at an additional 42 items. Two hundred and one psychologists from 39 states were surveyed about 112 aspects of child custody evaluation practices. The analysis was divided into evaluation practices, sole-joint custody decision making, and recommendations. Comparisons between the findings of this study and those of Keilin and Bloom are made. The current practice of child custody evaluations is reported. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Hierarchical approach to modelling of liquid-crystalline polymers

Summary Liquid-crystalline polymers exhibit fascinating structure at many size scales. This paper describes how computer models at different size scales can be linked together by a hierarchical approach to give a better understanding of the properties and behaviour of these materials. The atomic scale is considered first, where semi-empirical molecular orbital techniques are used to calculate the torsional energy functions associated with rotating the backbone bonds of the polymer. Secondly, entire chains are simulated using a Monte Carlo technique based on the torsional energy functions to deduce the persistence length of the polymer of interest. A theoretical relationship enables the Frank elastic constants to be determined from the persistence length. The elastic constants may then be used as input parameters for models both to predict microstructure and to help understand the role of defects in the shear flow of these materials. The hierarchical approach provides a meaningful framework within which data obtained from small-scale models are used to parameterise models at a larger scale.     

Beyond the Crisis Window for Reform: Some Ramifications for Implementation

In the policy literature, crises are often presented as opportunities for reform initiation. Little is known, however, about the effects that crises may have on the implementation of such reform initiatives. This article explores how a crisis may affect the administrative relations between central authorities and field administrations. The crisis impact on central-field relations appears to be twofold. First, a crisis may facilitate, if not induce, the centralization of decision-making processes. Secondly, a crisis may affect the degree of consensus between central authorities and field administrations with regard to problem definitions and preferred solutions. This paper uses a case study of the Dutch prison system to explore the crisis impact on these two dimensions of central-field relations. In this particular case, crisis circumstances did not facilitate a successful implementation of a major policy overhaul. We suggest that crises may offer opportunities for reform implementation, but only under highly restricted conditions. When these conditions are not met, crises may have perverse effects on central-field relations which limit the prospects for the effective implementation of reform.     

Mesure automatique des paramétres de bruit des MESFET hyperfréquences

An automatic noise parameter measurement test set is described in two sections : (i) A novel noise parameter extraction procedure from a set of noise figure measurements is developped. The experimental minimum noise figure is no longer required and the sensitivity to measurement incertainties is found to be very low. (ii) An automatic input tuner with a large number of precalibrated and reproducible positions is designed and realized. The last part give examples of broadband (8 to 17 GHz) noise parameters characterization ofmmic GaAsmesfets when both the automatic tuner and the extraction procedure are used.     

Functionally Graded,Bone‐ and Tendon‐Like Polyurethane for Rotator Cuff Repair

Critical considerations in engineering biomaterials for rotator cuff repair include bone‐tendon‐like mechanical properties to support physiological loading and biophysicochemical attributes that stabilize the repair site over the long‐term. In this study, UV‐crosslinkable polyurethane based on quadrol (Q), hexamethylene diisocyante (H), and methacrylic anhydride (M; QHM polymers), which are free of solvent, catalyst, and photoinitiator, is developed. Mechanical characterization studies demonstrate that QHM polymers possesses phototunable bone‐ and tendon‐like tensile and compressive properties (12–74 MPa tensile strength, 0.6–2.7 GPa tensile modulus, 58–121 MPa compressive strength, and 1.5–3.0 GPa compressive modulus), including the capability to withstand 10 000 cycles of physiological tensile loading and reduce stress concentrations via stiffness gradients. Biophysicochemical studies demonstrate that QHM polymers have clinically favorable attributes vital to rotator cuff repair stability, including slow degradation profiles (5–30% mass loss after 8 weeks) with little‐to‐no cytotoxicity in vitro, exceptional suture retention ex vivo (2.79–3.56‐fold less suture migration relative to a clinically available graft), and competent tensile properties (similar ultimate load but higher normalized tensile stiffness relative to a clinically available graft) as well as good biocompatibility for augmenting rat supraspinatus tendon repair in vivo. This work demonstrates functionally graded, bone‐tendon‐like biomaterials for interfacial tissue engineering.     

A Rapid Photopatterning Method for Selective Plating of 2D and 3D Microcircuitry on Polyetherimide

In this work, a method for the rapid synthesis of metallic microtracks on polyetherimide is presented. The method relies on the photosynthesis of silver nanoparticles on the surface of the polymer substrates from photosensitive silver chloride (AgCl), which is synthesized directly on the polyetherimide surface. The study reveals that the use of AgCl as a photosensitive intermediate accelerates the reactions leading to the formation of silver nanoparticles by up to two orders of magnitude faster than other photodecomposition schemes. The patterning can be conducted under blue light, with notable advantages over UV exposure. Polymers of significant interest to the microelectronics and 3D printing industries can be directly patterned by light using this photography‐inspired technique at throughputs high enough to be commercially advantageous. Light exposures as short as a few seconds are sufficient to allow the direct metallization of the illuminated polyetherimide surface. The results show that the silver required for the seed layer is minimal, and the later copper electroless plating results in the selective growth of conductive tracks for circuitry on the light‐patterned areas, both on flexible films and 3D printed surfaces.     

Analysis of environmental stress response on the proteome level

Thousands of man-made chemicals are annually released into the environment by agriculture, transport, industries, and other human activities. In general, chemical analysis of environmental samples used to assess the pollution status of a specific ecosystem is complicated by the complexity of the mixture, and in some cases by the very low toxicity thresholds of chemicals present. In that sense, a proteomics approach, capable of detecting subtle changes in the level and structure of individual proteins within the whole proteome in response to the altered surroundings, has obvious applications in the field of ecotoxicology. In addition to identifying new protein biomarkers, it can also help to provide an insight into underlying mechanisms of toxicity. Despite being a comparatively new field with a number of caveats, proteomics applications have spread from microorganisms and plants to invertebrates and vertebrates, gradually becoming an established technology used in environmental research. This review article highlights recent advances in the field of environmental proteomics, mainly focusing on experimental approaches with a potential to understand toxic modes of action and to identify novel ecotoxicological biomarkers.