Polyaniline and polypyrrole modified conductive nanocomposites of polyfuran and polythiophene with montmorillonite clay

Nanocomposites of polyfuran (PF) and polythiophene (PTP) with montmorillonite clay (MMT) were prepared and modified by loading of polyaniline (PANI) and polypyrrole (PPY) moieties via polymerization of aniline (ANI) and pyrrole (PY) in aqueous dispersions of PF-MMT and PTP-MMT nanocomposites. Formation of PANI and PPY and their subsequent incorporation in the PF-MMT and PTP-MMT composites was confirmed by FTIR absorption studies. X-ray diffraction (XRD) patterns of PANI and PPY modified PF-MMT and PTP-MMT composites showed that PF-MMT and PTP-MMT intercalates were still present in the modified composites. Scanning electron microscopic analysis revealed distinctive morphological patterns of the various composite particles. The dc conductivity values of PANI and PPY modified PF-MMT and PTP-MMT composites were in the order of 10⁻² S/cm in either system – a value much improved compared to the same for both of the unmodified PF-MMT (10⁻⁷ S/cm) and PTP-MMT (10⁻⁵ S/cm) nanocomposites respectively.     

Novel wet-chemical synthesis and characterization of nanocrystalline CeO2 and Ce0.8Gd0.2O1.9 as solid electrolyte for intermediate temperature solid oxide fuel cell (IT-SOFC) applications

Novel wet-chemical methods of synthesis have been adopted to synthesize nano-crystalline CeO₂ and Gd-substituted compositions aiming to explore an efficient oxide ion conducting solid electrolyte for intermediate temperature solid oxide fuel cell (IT-SOFC) applications. Nano-crystalline CeO₂ powders were synthesized by combustion method using redox mixture of cerric ammonium nitrate or cerium nitrate and maleic acid or 1,3-dimethylurea and compared with high surface area CeO₂ powders prepared by hydrothermal technique with microwave precipitated precursor from aqueous solutions of (NH₄)₂Ce(NO₃)₆ and urea. The grain size achieved by the hydrothermal technique is ∼7 nm which is smaller than that of commercial nano CeO₂ powders. Conventional or microwave sintering was used to prepare dense Ce_0.8Gd_0.2O_1.9 pellets from the ceria powders made of redox mixture of cerium nitrate, 1,3-dimethylurea (DMU) and Gd₂O₃ as the starting ingredients. The samples were characterized by X-ray diffractometry (XRD), transmission electron microscopy (TEM), diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), and ac impedance spectroscopy. The ionic conductivity measured for the pellet sintered at 1400 °C is 1 × 10⁻² and 2.4 × 10⁻² S/cm at 700 °C and 800 °C respectively.     

Incorporating Ancestors' Influence in Genetic Algorithms

A new criterion of fitness evaluation for Genetic Algorithms is introduced where the fitness value of an individual is determined by considering its own fitness as well as those of its ancestors. Some guidelines for selecting the weighting coefficients for quantifying the importance to be given to the fitness of the individual and its ancestors are provided. This is done both heuristically and automatically under fixed and adaptive frameworks. The Schema Theorem corresponding to the proposed concept is derived. The effectiveness of this new methodology is demonstrated extensively on the problems of optimizing complex functions including a noisy one and selecting optimal neural network parameters.     

A mixture-of-experts framework for adaptive Kalman filtering

This paper proposes a modular and flexible approach to adaptive Kalman filtering using the framework of a mixture-of-experts regulated by a gating network. Each expert is a Kalman filter modeled with a different realization of the unknown system parameters such as process and measurement noise. The gating network performs on-line adaptation of the weights given to individual filter estimates based on performance. This scheme compares very favorably with the classical Magill filter bank, which is based on a Bayesian technique, in terms of: estimation accuracy; quicker response to changing environments; and numerical stability and computational demands. The proposed filter bank is further enhanced by periodically using a search algorithm in a feedback loop. Two search algorithms are considered. The first algorithm uses a recursive quadratic programming approach which extremizes a modified maximum likelihood function to update the parameters of the best performing filter in the bank. This particular approach to parameter adaptation allows a real-time implementation. The second algorithm uses a genetic algorithm to search for the parameter vector and is suited for post-processed data type applications. The workings and power of the overall filter bank and the suggested adaptation schemes are illustrated by a number of examples.     

Estimating the demographic dividend: Evidence from Indian states

Using decadal data for 1961–2011, the paper explores the demographic dividend of major Indian states. Accordingly, we first explore Zipf’s law and thereafter, examine Gibrat’s law for the growth of state population. Based on these findings, we investigate the demographic dividend of state population. The results appear to suggest that the demographic dividend varies across states and these “dividends” are in fact, large in magnitude, especially for the laggard states.     

Failure Investigation of Boiler Water Wall Tubes of a Thermal Power Station

Failure investigation was carried out on boiler water wall tubes of a thermal power plant through visual inspection, chemical analysis, and metallurgical analysis. Failure was in the form of thin/micro cracks along the length of the tubes which were located at the girth welding joint of tubes. Experimental results revealed that the cracking was from inward to outward of the tube thickness. Discontinuities/cavities were observed in the welded region which might have occurred due to lack of fusion of base metal and the weld metal. Cracks were initiated from the sharp corner/crack tip of the cavities/discontinuities present at the welded region under the action of hoop/thermal stress existed during the operation. Nature of the crack propagation indicates the case of typical hydrogen-induced cracking. Moreover, the presence of the cavities/discontinuities reduced the cross-sectional area of tubes resulting increased stress intensity. Increased stress beyond the flow stress of the material assisted by hydrogen-induced effect resulted the cracking of the tubes. In order to mitigate the problem, proper welding of tubes joints should be carried out followed by proper inspection after weld. Secondly, hydrogen dissolution during welding should be prevented and treatment for its removal after welding should be carried out.     

An invariant subspace‐based approach to the random eigenvalue problem of systems with clustered spectrum

The repeated or closely spaced eigenvalues and corresponding eigenvectors of a matrix are usually very sensitive to a perturbation of the matrix, which makes capturing the behavior of these eigenpairs very difficult. Similar difficulty is encountered in solving the random eigenvalue problem when a matrix with random elements has a set of clustered eigenvalues in its mean. In addition, the methods to solve the random eigenvalue problem often differ in characterizing the problem, which leads to different interpretations of the solution. Thus, the solutions obtained from different methods become mathematically incomparable. These two issues, the difficulty of solving and the non‐unique characterization, are addressed here. A different approach is used where instead of tracking a few individual eigenpairs, the corresponding invariant subspace is tracked. The spectral stochastic finite element method is used for analysis, where the polynomial chaos expansion is used to represent the random eigenvalues and eigenvectors. However, the main concept of tracking the invariant subspace remains mostly independent of any such representation. The approach is successfully implemented in response prediction of a system with repeated natural frequencies. It is found that tracking only an invariant subspace could be sufficient to build a modal‐based reduced‐order model of the system. Copyright © 2012 John Wiley & Sons, Ltd.     

Effect of Al on the NiAl-Type B2 Precipitates in Ferritic Superalloys

Ultra-small-angle X-ray scattering (USAXS) is employed to quantify the average size, interparticle spacing, and volume fraction of the primary B2 precipitates in Fe-based superalloys with varying Al concentration. The results are analyzed with a model incorporating polydispersity and interference effects and verified by transmission electron microscopy (TEM) characterizations. As the Al amount increases from 4 to 10?mass pct, there is an approximately 40?pct decrease in the average interparticle spacing and?~30?pct reduction in the average particle diameter.     

Morphology,Mineralogy and Mixing of Individual Atmospheric Particles Over Kanpur (IGP): Relevance of Homogeneous Equivalent Sphere Approximation in Radiative Models

Estimation of the direct radiative forcing (DRF) by atmospheric particles is uncertain to a large extent owing to uncertainties in their morphology (shape and size), mixing states, and chemical composition. A region-specific database of the aforementioned physico-chemical properties (at individual particle level) is necessary to improve numerically-estimated optical and radiative properties. Till date, there is no detailed observation of the above mentioned properties over Kanpur in the Indo-Gangetic Plain (IGP). To fill this gap, an experiment was carried out at Kanpur (IITK; 26.52°N, 80.23°E, 142 m msl), India from April to July, 2011. Particle types broadly classified as (a) Cu-rich particles mixed with carbon and sulphur (b) dust and clays mixed with carbonaceous species (c) Fe-rich particles mixed with carbon and sulfur and (d) calcite (CaCO₃) particles aged with nitrate, were observed. The frequency distributions of aspect ratio (AR; indicator of extent of particle non-sphericity) of total 708 particles from April to June reveal that particles with aspect ratio range >1.2 to ≤1.4 were abundant throughout the experiment except during June when it was found to shift to high AR range, >1.4 to ≤1.6 (followed with another peak of AR i.e. >2 to ≤2.4) due to dust storm conditions enhancing the occurrence of more non-spherical particles over the sampling site. The spherical particles (and close to spherical shape; AR range, 1.0 to ≤1.2) were found to be <20% throughout the experiment with a minimum (11.5%) during June. Consideration of Homogeneous Equivalent Sphere Approximation (HESA) in the optical/radiative model over the study region is found to be irrelevant during the campaign.