Laser4F3/2→4I9/2and4F3/2→4I13/2transitions in KY(WO4)2:Nd3+

We report the observation of lasing at 0.9137 μm and 1.3545 μm in neodymium-doped KY(WO4)2at 77 K. Transition cross sections, fluorescent line width, and branching ratios are given.     

Thermal diffusivity of nanocarbon composites

This study was performed to measure the thermal diffusivity of different types of nanocarbon composites. Thermoexfoliated graphite (TEG), ultrasonically dispersed TEG, and multiwalled carbon nanotubes were used as fillers in epoxy polymer matrixes. The nanocarbon filler content was 1–10 wt%. The temperature dependence of the thermal conductivity and the heat capacity were extensively characterized in the temperature range between 150 and 425 K. For this purpose, the thermal diffusivity of the composites was investigated by two experimental methods: dynamic λ‐calorimeter and photoacoustic. The comparative analysis of thermal diffusivity of compacted TEG samples with different densities and of nanocarbon‐epoxy with different filler content was carried out. It was found that for the composites with a low distribution of the nanocarbon filler, the thermal diffusivity increases and that the value is determined by the structural and morphological properties of the filler. The orientation function for the TEG‐epoxy composites and the compact TEG samples differs due to the epoxy matrix that reduced anisotropy of the composite. POLYM. COMPOS., 2011. © 2010 Society of Plastics Engineers     

Crosslinking of addition copolymers from tricyclononenes bearing (CH3)3Si‐ and (C2H5O)3Si‐groups as a modification of membrane gas separation materials

Here, we report the synthesis and the study of gas‐transport properties of crosslinked highly permeable copolymers from Si‐containing norbornene derivatives. The initial high‐molecular‐weight copolymers were prepared via addition copolymerization of 3‐trimethylsilyltricyclo[4.2.1.0^2,5]non‐7‐ene (TCNSi1) with 3‐triethoxysilyltricyclo[4.2.1.0^2,5]non‐7‐ene (TCNSiOEt) in good or high yields using a Pd‐catalyst. The obtained copolymers included up to 10 mol% of TCNSiOEt units bearing reactive Si–O–C‐containing substituents. The crosslinking was readily realized by using simple sol–gel chemistry in the presence of Sn‐catalyst. The formed crosslinked copolymers were insoluble in common organic solvents. Permeability coefficients of various gases (He, H₂, O₂, N₂, CO₂, CH₄, C₂H₆, C₃H₈, n‐C₄H₁₀) in these copolymers before and after crosslinking were determined and the influence of the incorporated TCNSiOEt units as well as the crosslinking on gas transport properties were established. As a result, it was found that only a small reduction of gas‐permeability was observed when TNCSiOEt units were incorporated into the main chains, and the copolymers were crosslinked. At the same time, the selectivity for C₄H₁₀/CH₄ pair was increased. The suggested approach has allowed obtaining crosslinked polymers from Si‐containing monomers without a loss of the main membrane characteristics. POLYM. ENG. SCI., 59:2502–2507, 2019. © 2019 Society of Plastics Engineers     

跳变马尔可夫系统的最大混合相关熵状态估计

依托于多模型框架的跳变马尔可夫系统状态估计的性能通常受限于多模型间的信息融合程度.本文以交互式多模型方法为框架,针对跳变马尔可夫系统提出了一种基于最大混合相关熵的状态估计方法.为了能有效处理模型高阶信息,在混合和融合步骤引入最大混合相关熵测度替代常规的二阶统计矩准则,设计了关于系统状态的代价函数,通过最优化该函数得到状态估计的迭代解.仿真实验详尽展示了所提方法的主要特征,并表明其在高斯和非高斯噪声环境下都具有较好的估计效果.     

Synthesis of 2(E),6(E)-bis(chloromethylidene)-4-thiomorpholinamine-1-oxide and its hydrazones

An efficient method for preparation of earlier unknown S-oxide of 2(E),6(E)-bis(chloromethylidene)-4-thiomorpholinamine by oxidation of 2(E),6(E)-bis(chloromethylidene)-4-thiomorpholinamine hydrochloride with hydrogen peroxide in H₂O or EtOH/H₂O followed by the reaction mixture neutralization with Na₂CO₃ has been described. Interaction of the S-oxide with acetaldehyde, butanal, benzaldehyde, 4-methoxybenzaldehyde and 4-pyridinecarboxaldehyde in EtOH, C₆H₆, in the mixture of acetonitrile and ethanol or ethanol and benzene affords the unknown hydrazones, N-organylmethylidene-2(E),6(E)-bis(chloromethylidene)-4-thiomorpholinamine-1-oxides.     

Self-assembled virus-like particles with magnetic cores

Efficient encapsulation of functionalized spherical nanoparticles by viral protein cages was found to occur even if the nanoparticle is larger than the inner cavity of the native capsid. This result raises the intriguing possibility of reprogramming the self-assembly of viral structural proteins. The iron oxide nanotemplates used in this work are superparamagnetic, with a blocking temperature of about 250 K, making these virus-like particles interesting for applications such as magnetic resonance imaging and biomagnetic materials. Another novel feature of the virus-like particle assembly described in this work is the use of an anionic lipid micelle coat instead of a molecular layer covalently bound to the inorganic nanotemplate. Differences between the two functionalization strategies are discussed.     

Surface periodic domain structures for waveguide applications

We report the results of fabrication and investigations of surface periodic domain structures created by a set of quasi-point e-beam irradiations both on the Y- and X-cuts of LiNbO(3), and on Ti:LiNbO(3) and Zn:LiNbO(3) planar waveguides. Domain gratings with spatial periods from 4.75 to 7.25 μm were formed by a 25-keV e-beam. Doses from 500 to 2000 μC/cm(2) were used for different structures to estimate optimal fabrication conditions. The investigations allowed the visualization of the formed surface domain structures, estimation of their uniformity, and determination of waveguide generation of the second optical harmonic. The surface structures can be used in optical devices for the realization of quasi-phase-matched frequency conversion, which includes the creation of compact radiation sources based on waveguides.     

Penetration effect in gyrotropic slab: theory and applications

Scattering properties of a homogeneous anisotropic slab are investigated at fixed crystal anisotropy axis orientation. The penetration phenomenon for an incident wave propagating tangentially to the crystal surface is discussed. Slab-based nonreciprocal optical devices are proposed. Their operating principles are based on the slab scattering properties, but not on the Faraday effect. Numerical data for an optical isolator and frequency detector are presented.     

Physicochemical comparison of electroslag remelting with consumable electrode and electroslag refining with liquid metal

The paper is devoted to comparison of electroslag remelting (ESR) with consumable electrode and electroslag refining with liquid metal (ESR LM) processes. The possibility of rearrangement of the heat contributions coming from the consumable electrode and current supplying mould (non-consumable electrode, CSM) makes the core of the ESR process organisation in the CSM. The usage of liquid metal instead of consumable electrodes allows to reduce liquid bath temperature and volume in order to provide low segregation ingot. The formal assessment of physico-chemical conditions and experimental measurements of desulphurisation have shown the same level of refining ability of both processes. Replacing the classic ESR by the ESR LM is a prospective way to produce high-quality ingots from sophisticated and hard-to-deform materials, whereas manufacturing of the consumable electrodes is technically problematic and costly.