Interaction of triton X-100 on silica: A relationship between surface characteristics and adsorption isotherms

Adsorption of Triton X-100 on various silica substrates has been investigated. A number of solids, including a natural quartz, this quartz washed with HCl acid and subsequently heated at 1273 K; two aerosils and one Kieselgel silicas were studied. These solids exhibit surface areas in the range of 5 to 430 m² g^?1. All the Triton adsorption isotherms display an S-shape at the adsorption temperatures studied (298 and 308 K). It has been found that the pretreatments of natural quartz (by water washing, impurities removed by acid and/or high temperature calcination) affect considerably the amounts of TX-100 adsorbed. Measurements of surface composition have been made by X-ray photoelectron spectroscopy (XPS) with particular emphasis on the presence of impurities and on the number of OH groups at the surface of the samples. The nature of the surface hydroxyl has also been studied by infrared spectroscopy. Furthermore, the specific number of hydroxyl groups on the surface of the silica samples has been determined by thermogravimetric analysis. Finally an attempt to correlate solid surface characteristics with adsorption isotherms has been developed.     

Feasibility of fishmeal replacement by shrimp head silage protein hydrolysate in Nile tilapia (Oreochromis niloticus L) diets

This study provides information on the use of shrimp head silage protein hydrolysate (SPH) as an alternative protein source for tilapia feeding. Six diets (28% protein, 12% lipid) were prepared where fishmeal protein was replaced at levels of 0 (control), 10, 15, 20, 25 and 30% with the hydrolysate. The diets were supplied to Nile tilapia fry (338 mg initial weight) stocked in plastic recirculating 20 l tanks (10 animals per tank), with three replicates per treatment. After an 8 week experimental period, fish fed the diets containing 10 and 15% SPH showed significantly better performance in terms of final body weight, weight gain (%), mean daily weight gain (mg day^?1), specific growth ratio and feed conversion ratio than those fed the control diet (fishmeal as protein source) and higher‐SPH diets. It is concluded that shrimp head hydrolysate is a promising alternative protein source for tilapia feeding, improving growth ratio at dietary inclusion levels as high as 15%. In addition, the diets with added shrimp silage protein were well accepted by the fish, which avidly consumed the feed during the experiment. © 2002 Society of Chemical Industry     

Influence of the ethylene–(methacrylic acid)–Zn2+ ionomer on the thermal and mechanical properties of blends of poly(propylene) (PP)/ethylene–(vinyl alcohol) copolymer (EVOH)

The thermal and mechanical properties and the morphologies of blends of poly(propylene) (PP) and an ethylene–(vinyl alcohol) copolymer (EVOH) and of blends of PP/EVOH/ethylene–(methacrylic acid)–Zn²⁺ ionomer were studied to establish the influence of the ionomer addition on the compatibilization of PP/EVOH blends and on their properties. The oxygen transmission rate (O₂TR) values of the blends were measured as well. PP and EVOH are initially incompatible as was determined by tensile tests and scanning electronic microscopy. Addition of the ionomer Zn²⁺ led to good compatibility and mechanical behaviour was improved in all blends. The mechanical properties on extruded films were studied for 90/10 and 80/20 w/w PP/EVOH blends compatibilized with 10 % of ionomer Zn²⁺. These experiments have shown that the tensile properties are better than in the injection‐moulded samples. The stretching during the extrusion improved the compatibility of the blends, diminishing the size of EVOH domains and enhancing their distribution in the PP matrix. As was to be expected, the EVOH improved the oxygen permeation of the films, even in compatibilized blends. Copyright © 2004 Society of Chemical Industry     

Preparation and characterization of proton‐exchange hybrid membranes

Two types of composite were prepared, based on a thermoplastic polymer, polyvinylidene fluoride (PVDF), and an elastomer, ethylene‐propylene‐diene terpolymer (EPDM), respectively. We obtained both series by addition of an inorganic proton‐conducting antimonic acid derivative (HSb) and polystyrene crosslinked with a small percentage of divinylbenzene (PS‐co‐DVB). From these composites, membranes were obtained and subjected to a heterogeneous‐phase sulfonation reaction with chlorosulfonic acid. All experimental materials were characterized from a morphological and electrical point of view, by means of techniques such as differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), non‐isothermal crystallization and complex impedance analysis. Copyright © 2005 Society of Chemical Industry     

Properties of poly(ethylene terephthalate)–poly(ethylene naphthalene 2,6‐dicarboxylate) blends with montmorillonite clay

The production and properties of blends of poly(ethylene terephthalate) (PET) and poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) with three modified clays are reported. Octadecylammonium chloride and maleic anhydride (MAH) are used to modify the surface of the montmorillonite–Na⁺ clay particles (clay–Na⁺) to produce clay–C18 and clay–MAH, respectively, before they are mixed with the PET/PEN system. The transesterification degree, hydrophobicity and the effect of the clays on the mechanical, rheological and thermal properties are analysed. The PET–PEN/clay–C18 system does not show any improvements in the mechanical properties, which is attributed to poor exfoliation. On the other hand, in the PET–PEN/clay–MAH blends, the modified clay restricts crystallization of the matrix, as evidenced in the low value of the crystallization enthalpy. The process‐induced PET–PEN transesterification reaction is affected by the clay particles. Clay–C18 induces the largest proportion of naphthalate–ethylene–terephthalate (NET) blocks, as opposed to clay–Na⁺ which renders the lowest proportion. The clay readily incorporates in the bulk polymer, but receding contact‐angle measurements reveal a small influence of the particles on the surface properties of the sample. The clay–Na⁺ blend shows a predominant solid‐like behaviour, as evidenced by the magnitude of the storage modulus in the low‐frequency range, which reflects a high entanglement density and a substantial degree of polymer–particle interactions. Copyright © 2005 Society of Chemical Industry     

Probing the thermal decomposition process of layered double hydroxides through in situ <Superscript>57</Superscript>Fe Mössbauer and in situ X-ray diffraction experiments

The thermal decomposition properties of Mg–Fe hydrotalcites were studied through in situ ⁵⁷Fe Mössbauer spectroscopy and in situ X-ray diffraction. Abrupt changes in the quadrupolar splitting measured in the Mössbauer spectra revealed a phase transition from the starting lamellar structure to a new crystalline arrangement. By analyzing the Mössbauer parameters we show that the material is highly disordered in the 300–400 °C temperature range. This hypothesis is confirmed by the X-ray results whose diffractograms indicated the collapse of the lamellar structure and the formation of a solid solution.     

Manual dexterity of older Mexican American adults: a cross-sectional pilot experimental investigation

This paper reports results from an experimental pilot study performed to quantify the manual dexterity of older Mexican American adults. The Purdue pegboard test, a two-arm coordination test, and a hand-tool dexterity test were used in this study. To enable cross-sectional comparisons of manual dexterity measures of older Mexican American adults with young Mexican American adults, these tests were administered to 18 older Mexican American adults aged 63–85 (mean age: 71.3 years, SD: 7.0 years), recruited from senior recreation centers in El Paso, and eighteen young adults aged 21–32 (mean age: 25.6 years, SD: 3.8 years) recruited from the student body at the University of Texas at El Paso. For the Purdue pegboard test, the number of pegs placed in 30 s using the preferred hand, the non-preferred hand, and both hands were first individually monitored. Then, scores on an assembly task using the Purdue pegboard were obtained. For the two-arm coordination test, participants were required to trace a star pattern with a stylus using both hands. The time for task completion and the number of errors made during task performance were monitored. For the hand-tool dexterity test, participants were required to use common hand tools and remove nuts and bolts from one side of a wooden upright, and to assemble nuts and bolts in the corresponding holes on the other side of the upright. The time taken for task completion was recorded. Since modified Levene's test showed equality of variances, two sample t-tests, comparing the mean responses of older adults with the mean responses of young adults for each individual test, were conducted. Results indicate that responses for the older adults were statistically significant different (p<0.001) from young adults for all Purdue pegboard tasks. On the average, older adults performed significantly slower (p<0.001) than young adults on the two-arm coordination test, and committed more errors before task completion (p<0.05). Older adults also took longer to complete the hand-tool dexterity task compared to their younger counterparts (p<0.05). In addition to the t-tests, manual dexterity performance measures from older adults were regressed with age to determine the cross-sectional age effects on manual dexterity measures. Results indicate that all Purdue pegboard performance measures were significantly affected by age (p<0.05). The time to complete the two-arm coordination test was significantly linearly related to age (p<0.05). However, the number of errors committed by older adults in the performance of the two-arm coordination test was not significantly linearly related to age. Time to complete the hand-tool dexterity was also significantly linearly related to age (p<0.05). Accommodating age-related changes in manual dexterity is important for job design in industry, especially in industries employing older adults requiring significant assembly and hand-tool use.

Relevance to industry

Given the aging of the industrial workforce, it is important to understand how manual dexterity is affected by age, so that jobs requiring significant manual dexterity for task initiation, task performance and task completion are designed to fit older adult dexterity levels.     

Synthesis and characterization of functional gradient copolymers of glycidyl methacrylate and butyl acrylate

Epoxy-functional spontaneous gradient copolymers of glycidyl methacrylate (G) and n-butyl acrylate (B) were synthesized via atom transfer radical polymerization (ATRP). The copolymerization reactions were carried out in toluene solution at 70 °C, using methyl 2-bromopropionate (MBrP) as initiator and copper chloride with N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) as the catalyst system. The kinetic behaviour of the statistical copolymerizations was studied in a wide composition interval with molar fractions of G ranging from 0.10 to 0.75. The synthesized copolymers were characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. ¹H NMR was employed to determine the copolymer composition, demonstrating the gradient character of the copolymers along the main chain in the whole monomer conversion interval. Apart from this, the sequence distribution and stereoregularity were analyzed. These microstructural experimental data agreed well with those calculated from Mayo-Lewis terminal model (MLTM) and a Bernoullian statistic with an isotacticity parameter of σ_G = 0.28 and a coisotacticity parameter of σ = 0.30.