饱水石灰岩骨架和流体弹性参数的估算

本文利用Niu等提出的基于临界孔隙度模型的组分弹性参数数值计算方法,把测试岩石样品的孔隙度、整体密度、纵波速度和横波速度作为数值计算的输入数据,运用"双线性数值计算方法"反演求出临界点、流体和骨架的12个弹性参数。具体做法是:基于临界孔隙度模型,给出三组线性关系,即密度—孔隙度,整体剪切模量—孔隙度,整体纵波模量—孔隙度,上述每组线性关系分别以孔隙度作为自变量和因变量得到两个线性方程,再把两个方程计算的结果进行加权平均得到相关的弹性参数估算值,并结合饱水石灰岩样品数据实现了弹性参数估算。数值计算结果表明,由数值计算得到的弹性参数与测试弹性参数的均值和方差相差甚微,特别是密度数据的偏差均值更小,说明文中的数值计算结果是可靠的。     

Synthesis and electrochemical analyses of vapor-grown carbon fiber/pyrolytic carbon-coated LiFePO<Subscript>4</Subscript> composite

A vapor-grown carbon fiber/pyrolytic carbon-coated LiFePO₄ (VGCF/PCLFP) composite has been prepared in one step through a solid-state reaction accompanied by a gas-phase decomposition process. This method leads to the formation of a conductive network composed of pyrolytic carbon layer and in situ vapor-grown carbon fiber in the composite. The amount of carbon in the composite has been determined by a modified formula based on thermogravimetric analysis to be around 3.0 wt%. The optimized electrode of VGCF/PCLFP composite can deliver 150 mAhg⁻¹ at 0.5 C rate, 137 mAhg⁻¹ at 1.0 C rate and 132 mAhg⁻¹ at 3.0 C rate. And its discharge capacity loses only ~4% at a higher rate of 3.0 C after 100 cycles. The area-specific impedance of a cell fabricated with VGCF/PCLFP composite is lower than that made of only pyrolytic carbon-coated LiFePO₄, reported here for the purpose of comparison. In comparison to the electrode made of carbon black/LiFePO₄ composite (10 wt% carbon), the charge transfer resistance of the VGCF/PCLFP composite electrode decreases from 165 to 91 Ω. This technique presents an attractive way to produce high-performance LiFePO₄ cathode material through a low-cost high-efficiency process.     

提高热带轧机精轧AGC控制精度初探

武钢热轧厂在设备老化、产品厚度工下降的情况下，对ＡＧＣ控制模型及参数进行了分析与修改，通过采缩小允许锁定偏差值计算公式中的α值，调整ＧＭ方式ＡＧＣ用比例因子值，增加调节量与Ｘ射线厚度偏差矛盾值的判断程序，适当放大Ｘ射线厚度差值等措施，提高了厚度精度，带来了可观的经济效益。     

Thermal deformation measurement of the solder joints in electronic packages using electron moiré method

In this paper, electron moiré method is used to measure the thermal deformation of electronic packages. In order to observe the electron moiré fringe, a holographic grid was replicated on the cross section of the BGA type package at 150°C. This grid was fabricated on a glass plate using a moving point holographic system, and was replicated to measured area at high temperature. Under SEM, the holographic grid(specimen grid) and a programmed electron beam scan(master grid) interfere and form electron moiré patterns. The shear strain measurement technique using electron moiré method is described. Using the electron moiré method, the shear strains in the different solder joints were measured and analysed. Some useful results were obtained.     

12 nm tunable WDM source using an integrated laser array

A 12 nm tunable source with up to 15 mW fibre coupled power has been fabricated by integrating four DFB lasers and a booster amplifier to provide a single output. High-yield and low-cost techniques are used, such as quarter-wave-shifted phase-masks for wavelength definition and an integration technique with only two regrowths     

Solid polymerization and supramolecular chirality formation of azobenzene substituted diacetylene Langmuir–Blodgett films

An azobenzene mesogen-substituted diacetylene (NADA) monolayer has been transferred onto the solid substrate by the traditional Langmuir–Blodgett (LB) method. Solid-state polymerization of NADA LB films can be sensitized in visible light region. In situ UV–vis absorption measurement enables us to study polymerization kinetics of NADA LB films. The polymerization process can be described as a first order rate equation and polymerization rate constants are characterized in detail. Furthermore, achiral NADA molecules can form chiral LB films through overcrowded packing of the azobenzene moiety.     

Stress intensity factors for functionally graded solid cylinders

This paper presents the mode I stress intensity factors for functionally graded solid cylinders with an embedded penny-shaped crack or an external circumferential crack. The solid cylinders are assumed under remote uniform tension. The multiple isoparametric finite element method is used. Various types of functionally graded materials and different gradient compositions for each type are investigated. The results show that the material property distribution has a quite considerable influence on the stress intensity factors. The influence for embedded cracks is quite different from that for external cracks.     

Adsorption of anionic polyacrylamide onto coal and kaolinite: Changes of surface free energy components

The wettability of floc has a large effect on the selective flocculation flotation process of fine coal separation. The changes of thermodynamic characterization of coal and kaolinite have been investigated by Washburn dynamic method and Fourier transform infrared spectroscopy (FTIR) before and after the adsorption of anionic polyacrylamide. Lipophilic hydrophilic ratio (LHR), surface free energy, and its components were calculated by Washburn equation combined with Van Oss–Chaudhury–Good theory according to the wetting curves of coal and kaolinite samples wetted by n-hexane, α-bromonaphthalene, formamide, and water. After PAM A401 adsorption, the peaks of hydrophilic functional groups of coal (the amide group, free-NH2, secondary amide N–H, C–N) were increased, while the peaks of the hydrophobic functional group, including methyl (-CH3) and methylene (–CH2–), was decreased. The LHR value of coal decreased from 9.23 to 7.28. The polar components of coal were increased, the non-polar components were decreased, and the surface free energy was increased from 39.92 to 40.43 mN m^?1. The coal surface became more hydrophilic. For kaolinite, both hydrophilic and hydrophobic functional groups were increased, while its LHR values increased from 1.44 to 1.65. The polar component was decreased from 58.27 to 55.05 mN m^?2. Results of FTIR were corresponding to the surface property.     

Investigation on the critical velocity for liquid loss in immersion lithography

Immersion lithography seeks to extend the resolution of optical lithography by filling the gap between the final optical element and the wafer with a liquid characterized by a high index of refraction. The semiconductor industry demands high throughput, leading to relatively large wafer scanning velocities and accelerations. For higher scanning velocities, an issue that has been identified is the deposition of the immersion liquid while confining a relatively small amount of liquid to the under-lens region. Liquid loss occurs at the receding contact line that forms when a substrate is withdrawn from a liquid, which potentially leads to defects on printed patterns. There has been substantial prior work relative to understanding and building semi-empirical correlations and numerical models to investigate this behavior of the receding three-phase contact line. In the current work, a new liquid injection and collection model with analytic solutions is presented and compared with experimental results, in which the critical velocity for liquid loss is mainly a function of the vacuum degree, the injection flow rate, the properties of the immersion liquid. This correlation allows the critical velocity to be predicted with a given gap height between wafer and lens using only a measurement of the injection speed and knowledge of the fluid properties. Experimentally, glycerin–water mixtures of varying viscosities and different injection flow rates were tested, with variable outlet vacuum degree and inlet speed, showing a mean average error within 12%. This correlation represents a useful tool that can serve to approximately guide the development of fluid control for immersion systems as well as to evaluate alternative immersion fluid candidates to minimize liquid deposition while maximizing throughput.