GaInP/GaAs HBTs for high-speed integrated circuit applications

The use of GaInP/GaAs heterojunction bipolar transistors (HBTs) for integrated circuit applications is demonstrated. The discrete devices fabricated showed excellent DC characteristics with low V_ce offset voltage and very low temperature sensitivity of the current gain. For a non-self-aligned device with a 3-μm×1.4-μm emitter area, f_T was extrapolated to 45 GHz and f_max was extrapolated to 70 GHz. The measured 1/f noise level was 20 dB better than that of AlGaAs HBTs and comparable to that of low-noise silicon bipolar junction transistors, and the noise bump (Lorentzian component) was not observed. The fabricated gain block circuits showed 8.5 dB gain with a 3-dB bandwidth of 12 GHz, and static frequency dividers (divide by 4) were operable up to 8 GHz     

Delaminations at the free edge of a composite laminate

The concept of a fracture process zone where damage takes place is used to analyse the delaminations at the free edges of angle ply laminates under uniaxial tension. The use of a fracture process zone removes the singularity in the interlaminar stresses and enables the initiation and growth of delaminations to be modelled for a perfect laminate without any assumed prior defects. Two different models for the stress displacement relationship in the fracture process zone are examined: a constant stress up to critical displacement and a linear relationship. Finite element analysis shows that there is little difference in the predictions obtained from the two models. An approximate analysis is presented for the constant stress stress-displacement model which is shown to agree with a finite element solution and experimental data. Hence it is argued that the approximate method using a constant stress model for the fracture process zone is sufficient for accurate prediction of delaminations.     

Consequences of the formation of Cooper-pairs near oxygen-deficient sites

In this investigation we consider the formation of Cooper pairs near the oxygen-deficient sites in Y-Ba-Cu-O ceramic superconductors which would give rise to an energy-dependent potential as seen by conduction charge carriers. It is shown that Cooper pairs could be formed under such conditions, resulting in a supercurrent. We use the Bogoliubov transformation technique to calculate the energy gap, the energy difference, and the transition temperature of the model superconductor using certain data obtained from previous experiments. Numerical analysis shows that the superconducting current can be explained by the presence of such oscillating Cooper pairs.     

Positive state‐bounding observer for positive interval continuous‐time systems with time delay

This paper is concerned with the problem of positive observer synthesis for positive systems with both interval parameter uncertainties and time delay. Conventional observers may no longer be applicable for such kind of systems due to the positivity constraint on the observers, and they only provide an estimate of the system state in an asymptotic way. A pair of positive observers with state‐bounding feature is proposed to estimate the state of positive systems at all times in this paper. A necessary and sufficient condition for the existence of desired observers is first established, and the observer matrices can be obtained easily through the solutions of a set of linear matrix inequalities (LMIs). Then, to reduce the error signal between the system state and its estimates, an iterative LMI algorithm is developed to compute the optimized state‐bounding observer matrices. Finally, a numerical example is presented to show the effectiveness and applicability of the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.     

Fast full‐color reflective display via photoluminescent enhancement

Reflective displays are advantageous in applications requiring low power or daylight readability. However, there are no low‐cost reflective technologies capable of displaying bright colors. By employing photoluminescence to more efficiently use ambient light, we created a prototype display that provides bright, full color in a simple, low‐cost architecture. This prototype includes a novel electrokinetic shutter, a layer that incorporates patterned luminescent red, green, and blue sub‐pixel elements, and a novel optical out‐coupling scheme. The luminescent elements convert otherwise‐wasted portions of the incident spectrum to light in the desired color band, resulting in improved color saturation and lightness. This prototype provides a color gamut that is superior to competing reflective display technologies that utilize color filters in single‐layer side‐by‐side sub‐pixel architectures. The current prototype is capable of switching in <0.5 s; future displays based on an alternative electro‐optic shutter technology should achieve video rate operation. A transflective version of this technology has also been prototyped. The transflective version utilizes its backlight with a power efficiency that is at least three times that of a conventional liquid crystal display. These photoluminescence‐based technologies enable a host of applications ranging from low‐power mobile products and retail pricing signage to daylight readable signage for outdoor advertising segments.     

Electrokinetically driven concentration of particles and cells by dielectrophoresis with DC-offset AC electric field

Insulator-based dielectrophoresis (iDEP) has been successfully used for on-chip manipulations of biological samples. Despite its effectiveness, iDEP typically requires high DC voltages to achieve sufficient electric field; this is mainly due to the coupled phenomena among linear electrokinetics: electroosmosis (EO) and electrophoresis (EP) and nonlinear electrokinetics: dielectrophoresis (DEP). This paper presents a microfluidic technique using DC-offset AC electric field for electrokinetic concentration of particles and cells by repulsive iDEP. This technique introduces AC electric field for producing iDEP which is decoupled from electroosmosis (EO) and electrophoresis (EP). The repulsive iDEP is generated in a PDMS tapered contraction channel that induces non-uniform electric field. The benefits of introducing AC electric field component are threefold: (i) it contributes to DEP force acting on particles, (ii) it suppresses EO flow and (iii) it does not cause any EP motion. As a result, the required DC field component that is mainly used to transport particles on the basis of EO and EP can be significantly reduced. Experimental results supported by numerical simulations showed that the total DC-offset AC electric field strength required to concentrate 15-μm particles is significantly reduced up to 85.9% as compared to using sole DC electric field. Parametric experimental studies showed that the higher buffer concentration, larger particle size and higher ratio of AC-to-DC electric field are favorable for particle concentration. In addition, the proposed technique was demonstrated for concentration of yeast cells.     

Superparamagnetic particle dynamics and mixing in a rotating capillary tube with a stationary magnetic field

The dynamics of superparamagnetic particles subject to competing magnetic and viscous drag forces have been examined with a uniform, stationary, external magnetic field. In this approach, competing drag and magnetic forces were created in a fluid suspension of superparamagnetic particles that was confined in a capillary tube; competing viscous drag and magnetic forces were established by rotating the tube. A critical Mason number was determined for conditions under which the rotation of the capillary prevents the formation of chains from individual particles. The statistics of chain length was investigated by image analysis while varying parameters such as the rotation speed and the viscosity of the liquid. The measurements showed that the rate of particle chain formation was decreased with increased viscosity and rotation speed; the particle dynamics could be quantified by the same dimensionless Mason number that has been demonstrated for rotating magnetic fields. The potential for enhancement of mixing in a bioassay was assessed using a fast chemical reaction that was diffusion-limited. Reducing the Mason number below the critical value, so that chains were formed in the fluid, gave rise to a modest improvement in the time to completion of the reaction.     

Temperature dependence of high strain-rate impact fracture behaviour in highly filled polymeric composite and plasticized thermoplastic propellants

The effect of temperature and strain-rate on the fracture behaviour during high strain-rate ( 10³ sec^–1) impact of two highly filled polymeric composite propellants (containing segmented polyurethanes based on hydroxy-term inated polybutadiene (HTPB) or glycidyl azide polymer (GAP) filled with ammonium perchlorate (AP) particles) and a plasticized thermoplastic (cast double base (CDB) nitrocellulose-nitroglycerine) propellant have been examined over a wide temperature range encompassing the ittle-ductile transition. In the elastic region of the loaddisplacement curve, the yield stress and fracture toughness is highest for GAP/AP and lowest for HTPB/AP. In the elastic and post-yield ductile regions CDB is more fracture-resistant than GAP/AP and HTPB/AP over the temperature range –20 to 50° C, but below –40° C, where both CDB and GAP/AP are brittle, GAP/AP is more fracture-resistant than CDB (as observed in the elastic region). Although all the propellants are known to develop small cracks in the elastic and post-yield ductile regions of the load-displacement curve, the overall fracture behaviour is largely governed by viscoelastic properties (because the cracks close up in compression). The good mechanical properties of CDB, above the brittle-ductile transition temperature, can be attributed to the presence of a large-transition loss peak. In the composites, the fracture behaviour is also influenced to a lesser extent by the degree of filler-binder interactions. Dynamic mechanical analysis indicates that GAP/AP has a slightly higher degree of filler-binder interactions than HTPB/AP. A temperature-strain rate reduction has been obtained for the yield stress and the composite curve can be expressed by the equation _y =K ₁ +K ₂ log (ea _T ) whereK ₁ andK ₂ are constants anda _T is a shift factor.K ₂ is a material constant which reflects the temperature and strain-rate sensitivity.     

Usher Syndrome in the Inner Ear: Etiologies and Advances in Gene Therapy

Hearing loss is the most common sensory disorder with ~466 million people worldwide affected, representing about 5% of the population. A substantial portion of hearing loss is genetic. Hearing loss can either be non-syndromic, if hearing loss is the only clinical manifestation, or syndromic, if the hearing loss is accompanied by a collage of other clinical manifestations. Usher syndrome is a syndromic form of genetic hearing loss that is accompanied by impaired vision associated with retinitis pigmentosa and, in many cases, vestibular dysfunction. It is the most common cause of deaf-blindness. Currently cochlear implantation or hearing aids are the only treatments for Usher-related hearing loss. However, gene therapy has shown promise in treating Usher-related retinitis pigmentosa. Here we review how the etiologies of Usher-related hearing loss make it a good candidate for gene therapy and discuss how various forms of gene therapy could be applied to Usher-related hearing loss.     

Simulated Microgravity Inhibits the Proliferation of Chang Liver Cells by Attenuation of the Major Cell Cycle Regulators and Cytoskeletal Proteins

Simulated microgravity (SMG) induced the changes in cell proliferation and cytoskeleton organization, which plays an important factor in various cellular processes. The inhibition in cell cycle progression has been considered to be one of the main causes of proliferation inhibition in cells under SMG, but their mechanisms are still not fully understood. This study aimed to evaluate the effects of SMG on the proliferative ability and cytoskeleton changes of Chang Liver Cells (CCL-13). CCL-13 cells were induced SMG by 3D clinostat for 72 h, while the control group were treated in normal gravity at the same time. The results showed that SMG reduced CCL-13 cell proliferation by an increase in the number of CCL-13 cells in G0/G1 phase. This cell cycle phase arrest of CCL-13 cells was due to a downregulation of cell cycle-related proteins, such as cyclin A1 and A2, cyclin D1, and cyclin-dependent kinase 6 (Cdk6). SMG-exposed CCL-13 cells also exhibited a downregulation of α-tubulin 3 and β-actin which induced the cytoskeleton reorganization. These results suggested that the inhibited proliferation of SMG-exposed CCL-13 cells could be associate with the attenuation of major cell cycle regulators and main cytoskeletal proteins.