Reduction and Sintering of a Nickel–Dispersed-Alumina Composite and Its Properties

High-density nickel–dispersed-alumina (Al₂O₃/nickel) composites with superior mechanical properties were obtained by the hydrogen reduction and the hot pressing of alumina–nickel oxide (Al₂O₃/NiO) mixed powders. The mixtures were prepared by using NiO or nickel nitrate (Ni(NO₃)₂· n H₂O) as a dispersion source of nickel metal. Microstructural investigations of the composite fabricated using nitrate powder revealed that fine nickel particles, } 100 nm in diameter, dispersed homogeneously at the matrix grain boundaries, forming the intergranular nanocomposite. High strength (.1 GPa) and high-temperature hardness were registered for the composite that contained a small amount of nickel dispersion. The ferromagnetic properties of nickel, such as high coercive force, were observed, because of the fine magnetic dispersions, which indicates a functional value of structural composites.     

Steam Reforming of Methanol on Copper Catalysts Supported on Large-Surface-Area ZnAl2O3

Steam reforming of methanol on various supported Cu catalysts was examined. Supports strongly affected catalyst activity and, among the catalysts tested, Cu catalyst supported on large-surface-area ZnAl₂O₄ showed the highest activity, which, to the best of our knowledge, was higher than those for the supported catalysts reported so far. For supported Cu catalysts, two species were observed. One was a dispersed Cu species having strong interaction between Cu and support, and the other was an isolated Cu species. The activity of the former species strongly depended on supports.     

Gel permeation chromatography of polyoxymethylene

Gel permeation chromatography of polyoxymethylene has been studied using N,N-dimethylformamide as the solvent. Polyoxymethylene samples used here are a copolymer of tetraoxane with 1,3-dioxolane and a commercial polyoxymethylene whose molecular weight distributions are moderately broad. Their intrinsic viscosities [η] range from 1.4 to 2.8 dl/g. Factors affecting chromatograms are discussed, and the operating conditions were determined by using the analytical scale GPC. On the basis of these operating conditions, the molecular weight fractionation of polyoxymethylene was carried out by using the preparative scale GPC. It was found that polyoxymethylene can be effectively fractionated to give seven to ten fractions each of them containing the fractionated polymer ranging in weight from 0.2 to 8 mg when 40 mg polymer sample was used for a run of the measurement. The fractionated polymers were also found to have a narrow molecular weight distribution within a single peak, and their M_w/M_n values decrease with increasing molecular weight.     

Steam reforming on Ni-samaria-doped ceria cermet anode for practical size solid oxide fuel cell at intermediate temperatures

Direct internal and external reforming operations on Ni-samaria-doped ceria (SDC) anode with the practical size solid oxide fuel cell (SOFC) at intermediate temperatures from 600 to 750 °C are carried out to reveal the reforming activities and the electrochemical activities, being compared with the hydrogen-fueled power generation. The cell performance with direct internal and external steam reforming of methane and their limiting current densities were almost the same irrespective of the progress of reaction in the methane reformate at 700 and 750 °C. The durability test for 5.5 h at 750 °C with direct internal reforming operation confirmed that the cell performance did not deteriorate. The operation temperature of the cell controlled the reforming activities on the anode, and the large size electrode gave rise to high conversion due to the slow space velocity of the steam reforming. Direct internal steam reforming attained sufficient level of conversion for SOFC power generation with methane at 700 and 750 °C on the large Ni-SDC cermet anode.     

Orientation and Grain Boundary Microstructure of Alumina in Al/Al2O3 Composites Produced by Reactive Metal Penetration

The orientation and grain boundary microstructure of alumina in reactive metal penetration Al/Al₂O₃ composites are studied using orientation imaging microscopy and the results are compared with those of sintered polycrystalline Al₂O₃. The interconnected Al₂O₃ in the composite material is separated by Σ3 boundaries (twins) with a 60° rotation around the [0001] direction. A high frequency (∼100%) of Σ3 coincidence boundaries in composite alumina is remarkable since only ∼12% of boundaries in a sintered polycrystalline Al₂O₃ are of special nature. The coincidence boundaries in the in situ alumina grow in a coherent and faceted manner.     

水中隐孢子虫和贾第鞭毛虫的替代检测指标

美国国家环保局（USEPA）制定并发布的1623方法是目前国际上常用的水中隐孢子虫和贾第鞭毛虫标准检测方法，该方法存在成本高、回收率低等缺陷。各国研究者试图通过考察其他水质指标与两虫的相关关系来寻找两虫密度和活性的有效替代指标，以间接反映两虫在水体中的存在水平，其中包括浊度、颗粒计数等物理学指标以及细菌、细菌孢子、病毒、噬菌体等生物学指标。虽然还未得出具有普遍性的结论，但研究表明颗粒计数、好氧孢子等有可能成为有效的两虫替代指标。     

Mechanism of elongation of gold or silver nanoparticles in silica by irradiation with swift heavy ions

It has been reported that elongated Au nanoparticles oriented parallel to one another can be synthesized in SiO₂ by ion irradiation. Our aim was to elucidate the mechanism of this elongation. We prepared Au and Ag nanoparticles with a diameter of 20 nm in an SiO₂ matrix. It was found that Au nanoparticles showed greater elongated with a higher flux of ion beam and with thicker SiO₂ films. In contrast, Ag nanoparticles split into two or more shorter nanorods aligned end to end in the direction parallel to the ion beam. These experimental results are discussed in the framework of a thermal spike model of Au and Ag nanorods embedded in SiO₂. The lattice temperature exceeds the melting temperatures of SiO₂, Au and Ag for 100 ns after one 110 MeV Br¹⁰⁺ ion has passed through the middle of an Au or Ag nanorod.     

Effect of treatment of activated carbon fiber cloth electrodes with cold plasma upon performance of electric double-layer capacitors

Charge/discharge behavior of electric double-layer capacitors composed of activated carbon fiber cloth (ACFC) electrodes and an organic electrolyte was investigated. The modification of the ACFC electrodes was performed using cold plasma generated in argon-oxygen atmosphere. The effect of the cold plasma treatment of the ACPC electrodes on the capacitor performance was discussed on the basis of the physical and chemical properties of the ACFC surface such as pore radius distribution and surface atom concentration.     

Quantitative Visualization of the Interaction between Complement Component C1 and Immunoglobulin G: The Effect of CH1 Domain Deletion

Immunoglobulin G (IgG) adopts a modular multidomain structure that mediates antigen recognition and effector functions, such as complement-dependent cytotoxicity. IgG molecules are self-assembled into a hexameric ring on antigen-containing membranes, recruiting the complement component C1q. In order to provide deeper insights into the initial step of the complement pathway, we report a high-speed atomic force microscopy study for the quantitative visualization of the interaction between mouse IgG and the C1 complex composed of C1q, C1r, and C1s. The results showed that the C1q in the C1 complex is restricted regarding internal motion, and that it has a stronger binding affinity for on-membrane IgG2b assemblages than C1q alone, presumably because of the lower conformational entropy loss upon binding. Furthermore, we visualized a 1:1 stoichiometric interaction between C1/C1q and an IgG2a variant that lacks the entire C_H1 domain in the absence of an antigen. In addition to the canonical C1q-binding site on Fc, their interactions are mediated through a secondary site on the C_L domain that is cryptic in the presence of the C_H1 domain. Our findings offer clues for novel-modality therapeutic antibodies.     

Mouse Gastric Epithelial Cells Resist CagA Delivery by the Helicobacter pylori Type IV Secretion System

The initial step in bacterial infection is adherence of the bacterium to the target cell surface. Helicobacter pylori exploits the interaction of bacterial adhesin protein HopQ with human epithelial CEACAMs (CEACAM1, 5, and 6) to stably adhere to gastric epithelial cells, which is necessary for delivery of the H. pylori CagA oncoprotein into the epithelial cells via a type IV secretion system. In contrast to human CEACAMs, however, HopQ does not interact with Ceacam1 (mouse CEACAM1) in vitro or in CHO cells ectopically expressing Ceacam1. Since the mouse genome lacks Ceacam5 and Ceacam6, no significant HopQ–Ceacam interaction may occur in mouse gastric epithelial cells. Here, we found that the mouse stomach has a much lower expression level of Ceacam1 than the expression level of CEACAM1 in the human stomach. Consistently, mouse gastric epithelial cells resist CagA delivery by cagA-positive H. pylori, and the delivery is restored by ectopic expression of human CEACAM1 or CEACAM5 in mouse gastric epithelial cells. Thus, despite the fact that mice are routinely used for H. pylori infection studies, a low expression level of Ceacam1 in the mouse stomach together with the loss or greatly reduced interaction of HopQ with Ceacams make the mouse an inappropriate model for studying the role of H. pylori-delivered CagA in gastric pathogenesis, including the development of gastric cancer.