采用无偏振片反射式LCD及超低功耗驱动技术制造移动显示器件

我们通过对材料和制备条件的精细化处理,生产出一种在低刷新频率下无闪烁和图像迟滞现象的反射式显示器。该显示器的功耗非常低,且可在宽温度范围内工作,是未来移动显示器件的潜力平台。     

Hydroxypropyl-Distarch Phosphate from Potato Starch Increases Fecal Output, but Does Not Reduce Zinc, Iron, Calcium, and Magnesium Absorption in Rats

The physiological effects of hydroxypropyl‐distarch phosphate (HDP) were examined in rats. Male rats were fed a fiber‐free purified diet containing gelatinized potato starch (PS, 50 g/kg diet) that was not modified chemically or gelatinized, chemically modified potato starch (CMS, 50 g/kg diet) for 21 d. PS was used as the control. Six kinds of gelatinized HDP from potato with 2 different degrees of hydroxypropylation and 3 different degrees of cross‐linking were used as CMS. The wet weight and moisture of the fecal output of the rats fed highly hydroxypropylated HDP was 70% and 30% greater, respectively, than that in the control rats. The weights of the cecal wall and content of the rats fed highly hydroxypropylated HDP were 15% and 30% higher, respectively, than those of the control rats. The apparent absorption of Mg was 15% higher in the rats fed highly hydroxypropylated HDP than in the control rats. On the other hand, the apparent absorptions of Ca, Zn, and Fe were not affected by the diet. Cross‐linking did not influence the above‐mentioned physiological effects of HDP. Fecal excretion of bile acids and the plasma cholesterol concentration were not affected by the diet. These results show that the physiological effects of HDP depend on the hydroxypropylation but not the cross‐linking.     

Low‐velocity impact response and compression after impact assessment of recycled carbon fiber‐reinforced polymer composites for future applications

The influence of recycling on the impact damage resistance of recycled carbon fiber‐reinforced polymer (CFRP) composites was investigated using low‐velocity impact and compression after impact (CAI) tests. The relationships among load, force, and time were analyzed to gain insight into the damage characteristics of three types of composite laminate: virgin CF‐reinforced polymer (V‐CFRP), recycled CF‐reinforced polymer (R‐CFRP), and treated recycled CF‐reinforced polymer (TR‐CFRP). Special emphasis was placed on evaluating the extent of damage and the residual mechanical properties as affected by three different fiber surface states. Substantial differences were noted in the shape, area, and damage mode of impact using ultrasonic c‐scanning, photography, and scanning electron microscopy (SEM). V‐CFRP indicated significant improvement in impact damage resistance in the form of less damage, higher residual strength, and greater shear failure angle. Damage resistance was improved up to 80% of V‐CFRP by surface cleaning while R‐CFRP is 50% of V‐CFRP. Shear failure angle of 16° was attained from R‐CFRP and it was increased to 24° when the recycled fibers were cleaned. The result of SEM showed that there was less delamination of TR‐CFRP compared with R‐CFRP. This work proves that the low‐velocity impact response of recycled composites can rival that of virgin composites, while providing a basis for future applications of recycled carbon in many fields. POLYM. COMPOS., 35:1494–1506, 2014. © 2013 Society of Plastics Engineers     

Amplified fragment length polymorphism of the AWA1 gene of sake yeasts for identification of sake yeast strains

Sake yeasts are used for sake brewing and have a crucial role in the quality of sake, since they produce not only ethanol but also various compounds that provide sake flavors. Therefore, the appropriate selection and monitoring of a strain used in sake mash is important. However, the identification of specific sake yeast strains has been difficult, because sake yeasts have similar characteristics in taxonomic and physiological analyses. We found amplified fragment length polymorphisms (AFLPs) in the PCR products of the AWA1 gene of sake yeast strains. The AWA1 gene encodes a cell wall protein that is responsible for foam formation in sake mash. This polymorphism of the AWA1 gene can be used for the identification of sake yeast strains.     

Effects of calcining conditions of kaolinite on pore structures of mesoporous materials prepared by the selective leaching of calcined kaolinite

This paper describes the effects of calcining conditions of kaolinite on pore structures of the porous materials obtained from the selective leaching of calcined kaolinite using KOH solution. Mesoporous -Al₂O₃ was the predominant crystalline phase in the samples calcined in the temperature range between 950°C and 1050°C for 24 h. The mean specific surface area of these samples was approximately 250 m² · g^–1 and the mean total pore volume was approximately 0.8 ml · g^–1. The pore size distribution curves of these samples showed a sharp peak at around 2–3 nm pore radius. This peak was sharper for the sample calcined at 1000°C for 24 h. On the other hand, the pore sizes of the sample calcined at 1100°C for 24 h increased abruptly to 10–20 nm and this change corresponded to the formation of mullite in the sample. The pore sizes of the samples calcined at 1100°C varied with calcining time. The specific surface area and total pore volume decreased, the longer the calcining time of the samples, and this was correlated with an increase in the amount of mullite in the samples.     

紫外线杀菌的原理和最新应用

1紫外线杀菌的原理介绍 1.1紫外线杀菌原理 紫外线用于消毒、杀菌已经很多年了,细菌的细胞中含有细菌的遗传信息核酸DNA和RNA,当核酸被紫外线照射时会大量地吸收紫外光,从而就会在体内形成一部分的间二氮杂苯(主要构成为蛋白酶)和间二氮杂苯的异构体.这种物质会使细菌自身的新陈代谢机能出现障碍,并且会导致细菌的遗传性出现问题,而持续的紫外线照射,最后就会导致因为上述原因所造成的细菌群体的死亡.此外,紫外光除了杀菌的用途外,也可用于让微生物降低自身的"活动性",有些细菌在可见光的照射下是比较活跃的,我们称之为"光恢复"特性,也就是说,在波长为300～500nm的可见光下,细菌自身有一种光恢复酶素会让细菌种群变得很活跃,自身会大量繁殖.所以,当需要控制这种细菌的数量及种群时,则可以考虑用微弱的紫外线进行照射,将细菌的数量控制在一定范围之内.     

Photo atomic layer deposition of transparent conductive ZnO films

Low-resistivity ZnO films were grown by photo atomic layer deposition (photo-ALD) technique using diethylzinc (DEZ) and H₂O as reactant gases. Self-limiting growth was achieved for the temperature range from 105°C to 235°C. It was found that UV light irradiation was very effective to increase the electron concentration of the films and the electron concentration of 5 × 10²⁰ cm⁻³ was achieved even in undoped ZnO. Thus, the resistivity of the films grown with UV irradiation was one order of magnitude less than that grown without UV irradiation. The minimum resistivity of 6.9 × 10⁻⁴Ω cm was obtained by photo- ALD method without any intentional doping.     

Highly anisotropic thermal conductivity of mesogenic epoxy resin film through orientation control

To develop insulating materials with a high thermally conductive anisotropy, planarly aligned mesogenic epoxy (ME) resin film was fabricated by uniaxial coating on a hydrophobic polyethylene terephthalate substrate. Grazing incidence small-angle X-ray scattering (GISAXS) and transmission SAXS measurements exhibited that the films spontaneously formed uniaxially aligned monodomain-like smectic structures by curing on the hydrophobic substrate. Then, an in- and out-of-plane thermal conductivity of 10 and 0.048 W m⁻¹ K⁻¹ and outstanding thermal conductivity anisotropy of 208 have been confirmed, respectively. The ME resin films with high thermal conductivity can be applied as insulating materials for multiple-layer electrical and electronic devices.     

Fabrication of BSCF-based mixed oxide ionic-electronic conducting multi-layered membrane by sequential electrophoretic deposition process

The Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF)-based multi-layered oxygen separation membrane was fabricated by the sequential electrophoretic deposition (EPD) process. A thin porous/dense bi-layer of BSCF was formed on a thick porous support of BSCF. The porous support prepared by a sacrificial template method using BSCF powder mixed with wheat starch (30 wt%) as a pore-forming agent, followed by uniaxial pressing and low-temperature sintering, was directly used as an EPD electrode. A thin BSCF layer was first formed on the porous support, and then a thin BSCF + PMMA (polymethyl methacrylate) layer was sequentially formed on the thin BSCF layer using a bimodal suspension of BSCF and PMMA. A 30-μm thin porous/dense bi-layer of BSCF of which the total thickness was obtained by optimizing the processes of EPD and subsequent co-sintering. The oxygen separation performance of 3.7 ml (STP) min^?1 cm^?2 at 860 °C was achieved for the BSCF-based multi-layered oxygen separation membrane.     

Feeder components and instrumentation for the JT-60SA magnet system

The modifying of the JT-60U magnet system to the superconducting coils is progressing as a satellite facility for ITER by both parties of Japanese government and European commission in the Broader Approach agreement. The magnet system requires current supplies of 25.7 kA for 18 TF coils and of 20 kA for 4 CS modules and 6 EF coils. The magnet system generates an average heat load of 3.2 kW at 4 K to the cryogenic system. The feeder components connected to the power supply provide current supply. The cooling pipes connected to the cryogenic system provide coolant supply. The instrumentation of the JT-60SA magnet system is used for its operation.