Investigation of gas-liquid interface in atmospheric-pressure micro plasma with solution

An atmospheric-pressure glow-discharge micro plasma in contact with liquid paraffin is stably generated by using a capacitively coupled plasma method with a mesh electrode. When characteristics of the plasma are measured in the boundary between the micro plasma (gas-phase) and liquid paraffin (liquid-phase) using optical emission spectroscopy, spectrum peaks of the emission of CH and C₂ which dissociate from paraffin are observed. The result indicates that solution can feed particles to the plasma at gas-liquid interface and this plasma is accordingly expected to promote an attractive plasma process for creating materials consisting of elements in various solutions.     

定向反射管束对辐照均匀性的影响

为使多孔陶瓷板燃气辐射器加热物体能量定向集中，减少向周围环境散失的热量，在辐射器的前方，设计了定向反射管束，并进行了被加热物体表面辐照度分布特性数值计算研究。利用蒙特卡罗法中的辐射分配因子计算并分析了相关参数，例如管束布置(顺排、叉排及节距)、加热距离、管间距及管长与半径比等对被加热物体表面辐照度均匀性的影响。通过计算得出定向反射管间距是影响均匀加热面积大小的主要因素，管束布置方式对辐照度均匀性影响较小；随管长与半径比增加，物体表面辐照度均匀时，对应的加热距离增加。计算结果为实际装置的优化设计提供了理论依据。     

Texture and Formation Mechanism of Fibrous Calcium Hydroxyapatite Particles Prepared by Decomposition of Calcium–EDTA Chelates

The texture of fibrous calcium hydroxyapatite (Ca₁₀-(PO₄)₆(OH)₂, CaHAP) particles that were prepared by the decomposition of calcium–ethylenediaminetetraacetic acid (calcium–EDTA) chelates at 100°C under various pH conditions (pH values of 5–10) was investigated by various means. Well-crystallized fibrous CaHAPs were produced at pH .6. The stoichiometry of the CaHAPs with a chemical formula of Ca_{10− x} (HPO₄) _x (PO₄)_{6− x} (OH)_{2− x} (H₂O) _x was improved by increasing the decomposition pH. All the CaHAPs had unit-cell dimensions of a = 0.9436 ± 0.0003 nm and c = 0.6881 ± 0.0006 nm, exhibiting an enlarged a value. The finding of mesoporosity of CaHAPs by nitrogen gas (N₂) adsorption measurement indicated that the CaHAPs were produced by an agglomeration of primary particles. Furthermore, the nonstoichiometric CaHAPs that formed at pH 6 developed ultramicropores, which were accessible to water (H₂O) molecules but not to N₂ molecules, by the elimination of H₂O molecules that were adsorbed in interstices of primary particles in less-orderly crystallized CaHAPs and/or by dehydration of HPO₄²⁻ groups. These findings by gas adsorption techniques could give evidence for the agglomeration mechanism to attain a polycrystalline CaHAP, although they exhibited good crystallinity with large size.     

Antimicrobial and antifungal agents derived from clay minerals

A silver chelate of 2-(4-thiazolyl)-benzimidazole, dodecyltrimethylammonium cation and hexadecylpyridinium cation have been intercalated between montmorillonite, and the resulting samples were subjected to examination of their thermostabilities by thermogravimetry and carbon dioxide evolution analysis up to 500 °C in air. The degradation behaviour of the intercalant was significantly changed by intercalating between the montmorillonite layers. Two quaternary ammonium cations were released from the montmorillonite both at the same temperature, which was higher than those for the quaternary ammonium cations themselves. This relation was also observed in the case of 2-(4-thiazolyl)-benzimidazole. The improvement of the thermostability after intercalation can be attributed to the bonding between the intercalant and the host montmorillonite layers.     

Purification, bacteriolytic activity, and specificity of beta-lytic protease from Lysobacter sp. IB-9374

Lysobacter sp. IB-9374, which was isolated from soil as a high lysyl endopeptidase-producing strain (Chohnanet al., FEMS Microbiol. Lett., 213, 13-20, 2002), was found to produce a beta-lytic protease capable of lysing gram-positive bacteria such as Staphylococcus aureus, Microccocuseus, and Bacillus subtilis. The Lysobacter strain secreted the beta-lytic protease into the culture medium at a 2.4-fold higher level than Achromobacter lyticus. The enzyme was highly purified through a series of six steps with a high yield. The enzyme was strongly inhibited by tetraethylene-pentamine and 1,10-phenanthroline. The purified enzyme lysed more efficiently almost all the gram-positive bacteria tested than lysozyme, lysostaphin, and mutanolysin. The enzyme was very similar to Achromobacter beta-lytic protease containing one zinc atom in terms of amino acid composition and N-terminal sequence. The nucleotide sequence revealed that the mature enzyme was composed of 179 amino acid residues with additional 198 amino acids at the amino-terminal end of the enzyme. The deduced amino acid sequence of the mature enzyme coincided with that of the Achromobacter enzyme, although the prepro-region showed a 41% sequence identity with the counterpart. These results indicate that Lysobacter sp. is a useful strain for an efficient large-scale preparation of beta-lytic protease capable of lysing bacteria.     

Magnetic field analysis of a 70‐MW‐class superconducting generator by the 3D finite element method

The three‐dimensional magnetic field and eddy current distribution of the 70‐MW‐class superconducting generator was calculated by a finite element method. The condition for the exciting armature coil was calculated by the jω‐method. In the magnetic flux distribution of the armature winding bore, the value obtained by analysis had good agreement with the measurement. An analysis that let the rotor move by the synchronizing speed was also done. The armature voltage for the nonload condition and the armature current for the three‐phase short‐circuit condition obtained by calculations had good agreement with the measurements. The validity of the analytical model for three‐dimensional magnetic field analysis of superconducting generators was confirmed from these results. In addition, the synchronous reactances were calculated using these results with eddy current in the facing. It was found that the facing had the effect of decreasing synchronous reactance by about 5%. © 2000 Scripta Technica, Electr Eng Jpn, 134(2): 53–60, 2001     

Performance of SOR methods on modern vector and scalar processors

The building-cube method (BCM) is a new generation algorithm for CFD simulations. The basic idea of BCM is to simplify the algorithm in all stages of flow computation to achieve large-scale simulations. Calculation of a pressure field using the Successive Over Relaxation (SOR) method consumes most of the total execution time required for BCM. In this paper, effective implementations on modern vector and scalar processors are investigated. NEC SX-9 and Intel Nehalem-EX are the latest vector and scalar processors. Those processors have much higher peak performances than their previous-generation processors. However, their memory bandwidth improvement cannot catch up with the performance improvement of processors. This is the so-called memory wall problem. In our paper, we discuss optimization techniques for implementation of the SOR method based on architectural characteristics of these modern processors, and evaluate their effects on the sustained performances of these processors for BCM.     

Main R&D issues for fast reactor structural design standard

For realization of economical and reliable fast reactor (FR) plants, the Japan Atomic Energy Agency (JAEA) and the Japan Atomic Power Company (JAPC) are cooperating on the “Feasibility Study on Commercialized FR Cycle Systems”. To certify the design concepts through evaluation of the structural integrity of FR plants, the research and development of the “Elevated Temperature Structural Design Guide for Commercialized Fast Reactor (FDS)” is recognized as an essential theme. The FDS focuses on particular failure modes of FRs such as ratchet deformation and creep-fatigue damage due to cyclic thermal loads. For precise evaluation of these modes, the research and development for three main issues is in progress. First, the “Refinement of Failure Criteria” needs to be addressed for particular failure modes of FRs. Secondly, the development of “Guidelines for Inelastic Design Analysis” is conducted to predict elastic plastic and creep deformation under elevated temperature conditions. Lastly, efforts are being made toward preparing “Guidelines for Thermal Load Modeling” for the design of FR components where thermal loads are dominant.     

关于建立故障树的新探索

在诊断专家系统开发的基础上，讨论了故障树的建立问题，基于对系统特性的分析，提出了通过系统故障传递关系和故障传递可达关系，由计算机自动生成故障树的方法，并以大型过程系统为例，从理论上论证了该方法的可行性及其优点。     

Erythroid potentiating activity of tissue inhibitor of metalloproteinases on the differentiation of erythropoietin-responsive mouse erythroleukemia cell line, ELM-I-1-3, is closely related to its cell growth potentiating activity

The erythroid-potentiating activity (EPA) of the tissue inhibitor of metalloproteinase-1 (TIMP-1) was re-examined using ELM-I-1-3, a mouse erythroleukemia cell line, which responded well to erythropoietin. Depletion of pre-existing TIMP-1 from fetal calf serum in culture medium using monoclonal antibody suppressed erythropoietin-induced differentiation as measured by the induction of hemoglobin, commitment assay and globin mRNAs. The removal of TIMP-1 also suppressed the proliferation of ELM-I-1-3 as measured by cell number and de novo DNA synthesis. These changes were reversed by the addition of purified TIMP-1 to the culture medium. Anti-TIMP-1 antibody also blocked both hexamethylene bisacetamide (HMBA)-induced erythroid differentiation and the proliferation of both ELM-I-1-3 and Friend erythroleukemia cells. Considering previous reports analyzing the chemical induction of Friend mouse erythroleukemia cell differentiation, our results suggest that erythropoietin- or HMBA-induced erythroid differentiation might also be coupled with cell proliferation. Our 3H thymidine-uptake experiment shows that TIMP-1 removal was also effective in the inhibition of cell growth of various other cell lines in addition to erythroleukemia cell lines. These results suggest that EPA action of TIMP-1 on erythroid leukemia cell lines is closely related to its activity to promote the cell growth of various cell lines and cells including erythroleukemia cell lines.