In Vitro Cytotoxicity,Colonisation by Fibroblasts and Antimicrobial Properties of Surgical Meshes Coated with Bacterial Cellulose

Hernia repairs are the most common abdominal wall elective procedures performed by general surgeons. Hernia-related postoperative infective complications occur with 10% frequency. To counteract the risk of infection emergence, the development of effective, biocompatible and antimicrobial mesh adjuvants is required. Therefore, the aim of our in vitro investigation was to evaluate the suitability of bacterial cellulose (BC) polymer coupled with gentamicin (GM) antibiotic as an absorbent layer of surgical mesh. Our research included the assessment of GM-BC-modified meshes’ cytotoxicity against fibroblasts ATCC CCL-1 and a 60-day duration cell colonisation measurement. The obtained results showed no cytotoxic effect of modified meshes. The quantified fibroblast cells levels resembled a bimodal distribution depending on the time of culturing and the type of mesh applied. The measured GM minimal inhibitory concentration was 0.47 µg/mL. Results obtained in the modified disc-diffusion method showed that GM-BC-modified meshes inhibited bacterial growth more effectively than non-coated meshes. The results of our study indicate that BC-modified hernia meshes, fortified with appropriate antimicrobial, may be applied as effective implants in hernia surgery, preventing risk of infection occurrence and providing a high level of biocompatibility with regard to fibroblast cells.     

Novel Cyclopentaquinoline and Acridine Analogs as Multifunctional,Potent Drug Candidates in Alzheimer’s Disease

A series of new cyclopentaquinoline derivatives with 9-acridinecarboxylic acid and a different alkyl chain length were synthesized, and their ability to inhibit cholinesterases was evaluated. All designed compounds, except derivative 3f, exhibited a selectivity for butyrylcholinesterase (BuChE) with IC₅₀ values ranging from 103 to 539 nM. The 3b derivative revealed the highest inhibitory activity towards BuChE (IC₅₀ = 103.73 nM) and a suitable activity against AChE (IC₅₀ = 272.33 nM). The 3f derivative was the most active compound to AChE (IC₅₀ = 113.34 nM) with satisfactory activity towards BuChE (IC₅₀ = 203.52 nM). The potential hepatotoxic effect was evaluated for both 3b and 3f compounds. The 3b and 3f potential antioxidant activity was measured using the ORAC-FL method. The 3b and 3f derivatives revealed a significantly higher antioxidant potency, respectively 35 and 25 higher than tacrine. Theoretical, physicochemical, and pharmacokinetic properties were calculated using ACD Labs Percepta software. Molecular modeling and kinetic study were used to reveal the mechanism of cholinesterase inhibition in the most potent compounds: 3b and 3f.     

An integrated analysis of ergonomics and time consumption in Swedish 'craft-type' car disassembly

Car disassembly is at the edge of extensive rationalization due to increased legislative demands for recycling. This study focused on (1) assessing current mechanical exposures (physical work loads) for comparison with future rationalised systems, with particular emphasis on time aspects, (2) analysing disassembly work in terms of time consumption and exposures in constituent tasks as defined by a loss analysis technique, and (3) predicting the consequences of car disassembly rationalisation for mechanical exposures. The study showed that disassembly implied pronounced circulatory loads, and that more walking and higher lumbar peak loads were found than in studies of assembly work. Value-adding tasks comprised 30% of the total working time, and implied higher postural exposures for the head, arm, trunk and wrist, as well as less opportunities to recover, as compared to non-value-adding tasks. Organisational-type rationalization can be expected to increase the time spent in value-adding work, thus increasing local exposures for the average worker, while a concurrent increase in mechanization level might reduce circulatory exposures, the amount of walking, and peak lumbar loads.     

Brittle‐to‐Ductile Transition in Uniaxial Compression of Silicon Pillars at Room Temperature

Robust nanostructures for future devices will depend increasingly on their reliability. While great strides have been achieved for precisely evaluating electronic, magnetic, photonic, elasticity and strength properties, the same levels for fracture resistance have been lacking. Additionally, one of the self‐limiting features of materials by computational design is the knowledge that the atomistic potential is an appropriate one. A key property in establishing both of these goals is an experimentally‐determined effective surface energy or the work per unit fracture area. The difficulty with this property, which depends on extended defects such as dislocations, is measuring it accurately at the sub‐micrometer scale. In this Full Paper the discovery of an interesting size effect in compression tests on silicon pillars with sub‐micrometer diameters is presented: in uniaxial compression tests, pillars having a diameter exceeding a critical value develop cracks, whereas smaller pillars show ductility comparable to that of metals. The critical diameter is between 310 and 400 nm. To explain this transition a model based on dislocation shielding is proposed. For the first time, a quantitative method for evaluating the fracture toughness of such nanostructures is developed. This leads to the ability to propose plausible mechanisms for dislocation‐mediated fracture behavior in such small volumes.     

Polyurethane Composites Reinforced with Walnut Shell Filler Treated with Perlite,Montmorillonite and Halloysite

In the following study, polyurethane (PUR) composites were modified with 2 wt.% of walnut shell filler modified with selected mineral compounds–perlite, montmorillonite, and halloysite. The impact of modified walnut shell fillers on selected properties of PUR composites, such as rheological properties (dynamic viscosity, foaming behavior), mechanical properties (compressive strength, flexural strength, impact strength), dynamic-mechanical behavior (glass transition temperature, storage modulus), insulation properties (thermal conductivity), thermal characteristic (temperature of thermal decomposition stages), and flame retardant properties (e.g., ignition time, limiting oxygen index, heat peak release) was investigated. Among all modified types of PUR composites, the greatest improvement was observed for PUR composites filled with walnut shell filler functionalized with halloysite. For example, on the addition of such modified walnut shell filler, the compressive strength was enhanced by ~13%, flexural strength by ~12%, and impact strength by ~14%. Due to the functionalization of walnut shell filler with thermally stable flame retardant compounds, such modified PUR composites were characterized by higher temperatures of thermal decomposition. Most importantly, PUR composites filled with flame retardant compounds exhibited improved flame resistance characteristics-in all cases, the value of peak heat release was reduced by ~12%, while the value of total smoke release was reduced by ~23%.     

UVB Radiation and Selected Tryptophan-Derived AhR Ligands—Potential Biological Interactions in Melanoma Cells

Excessive UV exposure is considered the major environmental factor in melanoma progression. Human skin is constantly exposed to selected tryptophan-derived aryl hydrocarbon receptor (AhR) ligands, including kynurenine (KYN) and kynurenic acid (KYNA), as they are endogenously produced and present in various tissues and body fluids. Importantly, recent studies confirmed the biological activity of KYN and KYNA toward melanoma cells in vitro. Thus, in this study, the potential biological interactions between UVB and tryptophan metabolites KYN and KYNA were studied in melanoma A375, SK-MEL-3, and RPMI-7951 cells. It was shown that UVB enhanced the antiproliferative activity of KYN and KYNA in melanoma cells. Importantly, selected tryptophan-derived AhR ligands did not affect the invasiveness of A375 and RPMI-7951 cells; however, the stimulatory effect was observed in SK-MEL-3 cells exposed to UVB. Thus, the effect of tryptophan metabolites on metabolic activity, cell cycle regulation, and cell death in SK-MEL-3 cells exposed to UVB was assessed. In conclusion, taking into account that both UVB radiation and tryptophan-derived AhR ligands may have a crucial effect on skin cancer formation and progression, these results may have a significant impact, revealing the potential biological interactions in melanoma cells in vitro.     

Fracture toughness characterisation of a glass fibre‐reinforced plastic composite

By examining the state of the art, it can be realised that few research works have been done on the fracture behaviour of plastic composites reinforced with continuous glass fibres. Therefore, the present paper deals with the fracture toughness of a unidirectional glass fibre‐reinforced plastic (GFRP), such a parameter being analytically determined by means of the modified two‐parameter model (MTPM). The input data of the MTPM are obtained from an experimental campaign related to three‐point bending tests on single edge‐notched specimens characterised by different sizes. The novelty of this research work is that the MTPM, originally proposed for isotropic materials, is here employed to estimate the fracture toughness of GFRPs characterised by orthotropic mechanical properties.     

Virtual representation of the historic space riches

This Paper discusses the use of modern techniques to gather, convert and present the historic facts concerning the shape of the city—for an example of Warsaw. The aim of the project is to analyse chances of cooperative use of historic data base and contemporary software in intention to create virtual model of the old urban structure.

The deepest source of understanding the contemporary nature of the city is genuine consciousness of its history.

Three Component Composite Scaffolds Based on PCL,Hydroxyapatite, and L-Lysine Obtained in TIPS-SL: Bioactive Material for Bone Tissue Engineering

In this research, we describe the properties of three-component composite foam scaffolds based on poly(ε-caprolactone) (PCL) as a matrix and hydroxyapatite whiskers (HAP) and L-Lysine as fillers (PCL/HAP/Lys with wt% ratio 50/48/2). The scaffolds were prepared using a thermally induced phase separation technique supported by salt leaching (TIPS-SL). All materials were precisely characterized: porosity, density, water uptake, wettability, DSC, and TGA measurements and compression tests were carried out. The microstructure of the obtained scaffolds was analyzed via SEM. It was found that the PCL/HAP/Lys scaffold has a 45% higher Young’s modulus and better wettability compared to the PCL/HAP system. At the same time, the porosity of the system was ~90%. The osteoblast hFOB 1.19 cell response was also investigated in osteogenic conditions (39 °C) and the cytokine release profile of interleukin (IL)-1β, IL-6, and tumor necrosis factor (TNF)-α was determined. Modification of PCL scaffolds with HAP and L-Lysine significantly improved the proliferation of pre-osteoblasts cultured on such materials.