基于LVDS技术的高速数据传输系统设计

串行传输技术具有更高的传输速率和更低的设计成本,被广泛应用于高速通信领域;研究了一种基于FPGA的LVDS高速数据传输系统方案,该方案以Altera FPGA芯片为核心,通过其LVDS I/O口稳定可靠地完成数据传输,系统采用Verilog语言完成8B/10B编解码、时钟数据恢复、CRC校验、字节边界调整、误码率测试模块等;通过实验表明,该方案既满足了长距离和高速数据传输的要求,又降低了系统成本。     

Semi‐Global Output Feedback Stabilization for a Class of Uncertain Nonlinear Systems

This paper addresses the problem of semi‐global stabilization by output feedback for a class of nonlinear systems whose output gains are unknown. For each subsystem, we first design a state compensator and use the compensator states to construct a control law to stabilize the nominal linear system without the perturbing nonlinearities. Then, combining the output feedback domination approach with block‐backstepping scheme, a series of homogeneous output feedback controllers are constructed recursively for each subsystem and the closed‐loop system is rendered semi‐globally asymptotically stable.     

Stability of a class of switched stochastic nonlinear systems under asynchronous switching

The stability of a class of switched stochastic nonlinear retarded systems with asynchronous switching controller is investigated. By constructing a virtual switching signal and using the average dwell time approach incorporated with Razumikhin-type theorem, the sufficient criteria for pth moment exponential stability and global asymptotic stability in probability are given. It is shown that the stability of the asynchronous stochastic systems can be guaranteed provided that the average dwell time is sufficiently large and the mismatched time between the controller and the systems is sufficiently small. This result is then applied to a class of switched stochastic nonlinear delay systems where the controller is designed with both state and switching delays. A numerical example illustrates the effectiveness of the obtained results.     

动态网络安全模型信息安全风险分析

通过动态网络模型信息安全风险分析实验,在LazyLBR和VFI的ROC曲线进行统计和F-度量,采用10倍交叉验证方法.针对网络的脆弱性、外界的威胁和资产价值几种数据,对比四种动态网络模型信息安全风险的数字学习曲线.     

含砷氰化尾矿回填利用污染控制技术试验研究

针对某黄金生产企业含砷氰化尾矿污染特征,开展了搅拌洗涤法、臭氧氧化法、酸化溶砷法、铁盐固砷法等多种无害化方法联合处理试验研究,旨在将该含砷氰化尾矿处理至满足氰渣规范回填利用污染控制要求。结果表明：该含砷氰化尾矿回填利用污染控制技术工艺为压滤调浆搅拌洗涤+臭氧氧化+酸化溶砷+铁盐固砷,最佳参数为原矿浆压滤后加水调浆,矿浆浓度40%,臭氧投加量0.66 g/L,酸化溶砷pH值3、曝气量0.1 m³/h、反应时间2 h,铁盐固砷七水合硫酸亚铁投加量20.0 g/L、反应时间1 h。研究结果为该黄金生产企业含砷氰化尾矿回填利用提供了技术支撑。     

缩进式管子-管板焊接工艺

管子-管板焊接是换热器生产的关键工序,通过对缩进式管子-管板焊接技术进行的试验和分析,确定了最佳的焊接参数,供换热器制造厂有关技术人员参考.     

铸件缺陷修补方法

简述了铸件缺陷的谷种修补方法及工艺，指出液膜溶解扩散焊是一种比较先进的焊补方法。     

PZT／Terfenol-D／PVDF层状复合磁电材料谐振特性

采用热压法制备出二层锆钛酸铅(PZT)／聚偏氟乙烯(PVDF)与1层Tb0.28Dy0.72Fe2(Terfenol-D)／PVDF叠层结构的三元复合磁电材料，研究了不同PVDF含量，以及不同层厚比tp／L对样品的介电常数、介电损耗、电阻率、谐振频率以及磁电转换系数αE33，αE31的影响规律，结果显示PVDF的含量和层厚比都存在最佳值(最佳值出现在产0．5，tp／L=2／7)，并且在这个最佳值处，磁电转换系数达到最大。     

ZrB2-SiC基超高温陶瓷（UHTCs）的反应烧结及SHS粉体制备

用普通反应热压方法（RHP）和反应放电等离子体方法（R-SPS）原位反应制备了ZrB2-SiC，ZrB2-SiC—ZrC，ZrB2-SiC-ZrN，以及ZrB2-SiC-AIN4种复合材料。从密度，物相以及显微结构等方面比较了两种烧结方式之间的差别，对于升温速度较慢的普通热压方法，反应分步进行，显微结构不均匀；对于升温速度快的放电等离子体烧结，原料间的自蔓延反应被点着，反应速度快，显微结构均匀。同时以红外灯的热量为点火源，引发了Zr，Si及B4C间在空气气氛下的自蔓延反应，制备了较纯及粒径约为1μm的活性粉体。     

A study of the properties of ink-jet printed cotton fabric following low-temperature plasma treatment

This paper studies the effect of low-temperature plasma treatment on an ink-jet printed cotton fabric. Due to the specific printing and conductivity requirements for ink-jet printing, not all conventional printing chemicals, such as sodium alginate and urea, used for cotton fabric can be directly incorporated into the ink formulation. As a result, the cotton fabric requires pretreatment with the printing chemicals prior to the stage of ink-jet printing. Cotton is pretreated with the printing chemicals by means of a coating method. The aim of this paper was to study the possibility and effectiveness of applying low-temperature plasma treatment to enhance the performance of pretreatment paste containing sodium alginate so as to improve the properties of the ink-jet printed cotton fabric. Experimental results revealed that a low-temperature plasma pretreatment coupled with the ink-jet printing technique could improve the final printed properties of cotton fabric.