Effect of phosphine on acid corrosion of iron

The effect of the phosphine-concentration (10^?8–10^?3 M) in strong acid solutions (pH = 0) on the corrosion rate of pure iron and Fe- 0.12% P alloy has been investigated. It was shown that at low concentrations (10^?7–10^?6M), phosphine accelerates the corrosion of iron, whereas at adequately high concentrations (10^?5–10^?3 M) it has inhibitory properties. In the presence of PH₃ the cathodic reduction of hydrogen ions is strongly accelerated. At the same time, the increase in PH₃ concentration causes an increase of surface coverage by PH₃ molecules, which results in the inhibition of both partial electrode processes.     

Design optimisation of a solar-energy harnessing system for stimulating an irrigation pump

Water from below ground level is to be raised, for the irrigation of a desert area near Cairo, Egypt, by harnessing solar power. The solar-energy collector is an array of gravity-return heat pipes, each surrounded by a cylindrical high-vacuum enclosure. The prime mover, in the form of a multi-vane expander, operates in an organic Rankine-cycle using trichlorotrifluoroethane as the working fluid. For specified conditions, the performances and optimal output temperatures of the collector (so that maximum overall efficiency of the system can be achieved) are predicted.     

A pattern based PSO approach for block matching in motion estimation

Block matching motion estimation is a popular method in developing video coding applications. A new algorithm has been proposed for reducing the number of search points using a pattern based particle swarm optimization (PSO) for motion estimation. The conventional particle swarm optimization has been modified to provide accurate solutions in motion estimation problems. This leads to very low computational cost and good estimation accuracy. Due to the center biased nature of the videos, the proposed approach uses an initial pattern to speed up the convergence of the algorithm. Simulation results show that improvements over other fast block matching motion estimation algorithms could be achieved with 31%～63% of search point reduction, without degradation of image quality.     

Microwave Heated Chemical Vapor Infiltration: Densification Mechanism of SiCf/SiC Composites

Silicon carbide fiber-reinforced silicon carbide matrix composites (SiC_f/SiC) have been produced using microwave heated chemical vapor infiltration. Preferential densification of the composite from the inside out was clearly observed. Although an average relative density of only 55% was achieved in 24 h, representative of an ∼26% increase over the initial fiber vol%, the center of the preform densified to 73% of the theoretical. The densification mechanisms were investigated using X-ray absorptiometry and scanning electron microscopy. The initial inverse temperature profile obtained, which was found to result in the efficient filling of the intratow porosity, although not the intertow porosity, flattened out after approximately 6 h as the densification front moved outward toward the edges. Although not investigated directly, the evidence suggested that this was caused by changes in both the thermal conductivity and microwave absorption characteristics as the samples densified.     

Development of new encryption system using Brownian motion based diffusion

Multimedia Tools and Applications - A new cryptographic model is proposed incorporating intertwining logistic map based confusion process and two dimensional Brownian Motion based diffusion...     

The effect of the shape and size of the pores on the mechanical properties of porous HAP-based bioceramics

In this study, the influence of the shape and size of the pores on the mechanical properties of the obtained porous HAP-based bioceramics was investigated. The porous HAP-based bioceramics were obtained starting from spherical calcium hydroxyapatite powder, obtained by hydrothermal syntheses. The number of shapeless inter-agglomerate pores decreased and amount of spherical intra-agglomerate pores increased on increasing the sintering temperature from 1100 °C to 1250 °C. The shape of pores also changed with thermal treatment of specimens; the small pores remained spherical while the larger pores became more spherical in shape, as was proved by image analysis. A three-dimensional, finite element unit cell model was applied to evaluate the influence of pore shape on the mechanical strength of HAP ceramics. By analyzing the effect of the shape of pores to the fracture toughness of sintered porous HAP bioceramics, it was observed that the more spherical the pores were, the tougher became the bioceramics. After sintering at 1250 °C for 2 h, measured toughness was 1.31 MPa m^1/2, which is a relatively high value for this type of bioceramics.     

TrkB Receptor Signalling: Implications in Neurodegenerative,Psychiatric and Proliferative Disorders

The Trk family of receptors play a wide variety of roles in physiological and disease processes in both neuronal and non-neuronal tissues. Amongst these the TrkB receptor in particular has attracted major attention due to its critical role in signalling for brain derived neurotrophic factor (BDNF), neurotrophin-3 (NT3) and neurotrophin-4 (NT4). TrkB signalling is indispensable for the survival, development and synaptic plasticity of several subtypes of neurons in the nervous system. Substantial evidence has emerged over the last decade about the involvement of aberrant TrkB signalling and its compromise in various neuropsychiatric and degenerative conditions. Unusual changes in TrkB signalling pathway have also been observed and implicated in a range of cancers. Variations in TrkB pathway have been observed in obesity and hyperphagia related disorders as well. Both BDNF and TrkB have been shown to play critical roles in the survival of retinal ganglion cells in the retina. The ability to specifically modulate TrkB signalling can be critical in various pathological scenarios associated with this pathway. In this review, we discuss the mechanisms underlying TrkB signalling, disease implications and explore plausible ameliorative or preventive approaches.     

The Temperature Uniformity During Air Drying of a Colloidal Liquid Droplet

ABSTRACT

The mathematical analysis for drying of individual droplets containing dissolved or suspended solids has been given significant importance due to the increasing popularity of the spray drying operation in the production of various chemicals, ceramics, drugs, food, and dairy powders as well as nanoparticles. The physical and biological qualities of the final products primarily depend on the history experienced by the droplet within the dryer. It is, therefore, desirable to ‘estimate’ the droplet's behavior and various characteristics such as moisture content and temperature profiles accurately. In the literature, several models have been presented to estimate moisture and temperature profiles inside a particle considering various assumptions. One common assumption is the uniform temperature distribution within the droplets being dried. The present article has presented an estimation procedure to evaluate the temperature distribution within a porous skim milk droplet to determine whether the uniform temperature distribution assumption is reasonable. Here, the surface-center temperature differences were estimated by considering the one-dimensional, unsteady-state heat conduction equation for a spherical droplet. Shrinkage of droplets was taken into consideration during modeling. A new concept of the Biot number has also been applied in the current article to assist in the determination of the rate-limiting process.     

A biopolymer-based composite hydrogel for rhodamine 6G dye removal: its synthesis,adsorption isotherms and kinetics

The present study reports the preparation and application of a novel biopolymer-based composite hydrogel (BCH) for removal of synthetic dye rhodamine 6G (Rh6G). BCH was prepared from biopolymer chitosan and acrylic acid monomer, in the presence of initiator (K₂S₂O₈) and cross-linker thiourea using microwave irradiation. Synthesized chitosan-based composite hydrogel was characterized by using analytical techniques including Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), derivative thermogravimetric analysis (DTA) and differential thermal analysis (DTG). The stability of the adsorbent was demonstrated from its water uptake capacity. The dynamics of water sorption study showed the Fickian behavior. The investigations were continued to assess the adsorption potential of BCH for removal of Rh6G from aqueous solution. The effect of process parameters affecting the adsorption of rhodamine 6G (Rh6G), such as adsorbent dose, initial concentration of pollutant, contact time and pH of the solution was evaluated. Removal efficiency of chitosan-based composite hydrogel (BCH) was found to be 87.31% at pH 7 for BCH dose of 1 g/L after 8 h. The obtained data were fitted to adsorption isotherms and kinetics models. The adsorption equilibrium isotherm and kinetics studies indicated that the pseudo-second-order model and the Freundlich model well described the adsorption equilibrium of Rh6G on BCH.     

Additive manufacturing of barium titanate based ceramic heaters with positive temperature coefficient of resistance (PTCR)

Lanthanum/manganese doped barium titanate (BT) based PTCR functional heater elements/structures were fabricated with desirable electrical properties for the first time using Additive Manufacturing (AM). 3D printed components of varying size and shape and prototype honeycomb lattices with high density were achieved through AM. Aqueous, less organic containing (2.5 wt% additives versus 10–30 wt% added typically), eco-friendly ink formulations were developed with suitable rheological properties for 3D printing. For BT prints, the sintered densities of the 3D ceramic parts were found to be >99% TD, highest reported value so far. The microstructure, electrical properties and heating characteristics of the printed PTCR components were studied in detail and their thermal stability evaluated using infrared imaging and benchmarked against commercial PTCR heating element. The heating behaviour of the solid and porous 3D printed components was demonstrated to be similar, paving the way for light weight (?47% reduction in weight) heaters suitable for automotive/aerospace applications and less materials wastage during device fabrication.