Interesting aspects of the analysis of resistivity in Li irradiated Bi-2212

Differently heat treated and 55 MeV Li³⁺ beam irradiated Bi₂Sr₂Ca₁Cu₂O_8+δ (Bi-2212) high temperature superconductors have been studied from the analysis of resistivity in the normal state as well as near the superconducting transition. For all the unirradiated and irradiated samples the so-called linear temperature dependence of the normal state resistivity, in a wide temperature range, can well be understood within the variable range hopping (VRH) conduction scenario. Near and above the bulk superconducting transition, the fluctuation enhanced conductivity (paraconductivity) analysis shows a noteworthy modification of the conduction process due to radiation induced defects.     

GALDS: a complete framework for designing multiclock ASICs and SoCs

A Globally Asynchronous, Locally Synchronous (GALS) system with dynamic voltage and frequency scaling can use the slowest frequency possible to accomplish a task with minimal power consumption. With the mechanism for implementing dynamic voltage scaling at each synchronous domain left up to the designer, our Globally Asynchronous, Locally Dynamic System (GALDS) provides a top-down, system-level means to maximize power reduction in an integrated circuit and facilitate system-on-a-chip (SoC) design. Our solution includes three distinct components: a novel bidirectional asynchronous FIFO to communicate between independently clocked synchronous blocks , an all-digital dynamic clock generator to quickly and glitchlessly switch between frequencies and a digitally controlled oscillator to generate the global fixed frequency clocks required by the all-digital dynamic clock generator. In addition to being capable of reducing power consumption when combined with dynamic voltage scaling, a GALDS design benefits from numerous other advantages such as simplified clock distribution, high performance operation and faster time-to-market through the modular nature of the architecture.     

Mechanical and tribological behavior of alumina and alumina‐CNT reinforced hybrid unsaturated polyester composites

Micro‐ and nano‐scale wear behavior of alumina vis‐á‐vis alumina‐carbon nanotube‐reinforced hybrid composites has been studied. In comparison to the pristine alumina, the alumina‐carbon nanotube hybrid reinforcement resulted in reduced scratch depth and lower frictional coefficient. Addition of carbon nanotube has effectively modified the pristine alumina into a superior wear resistant filler. POLYM. COMPOS., 37:1577–1586, 2016. © 2014 Society of Plastics Engineers     

Dielectric properties of EVA/LDPE TPE system: Effect of nanosilica and controlled irradiation

The pristine nanosilica particles were melt‐blended with a model low‐density polyethylene–ethylene vinyl acetate thermoplastic elastomers (TPE) system by varying the sequence of addition and nanosilica contents. Bis‐[3‐(triethoxysilyl)propyl] tetrasulfide (Si‐69) was used to improve the state of dispersion of nanosilica particles in one of the compositions. The dielectric properties of the TPE systems are influenced remarkably by loadings of silica, variation of sequence of addition of ingredients during mixing, addition of Si‐69, and controlled electron beam irradiation. The effects of interfacial and orientation polarization on the permittivity and the loss tangent were studied by dielectric analyses. These were correlated with the structures of various nanocomposites. An attempt has also been made to support the dielectric results by volume resistivity measurements, measurements of breakdown voltage, and swelling–deswelling kinetic results. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Investigation on Sodium Benzoate Release from Poly(Butylene Adipate‐Co‐Terephthalate)/Organoclay/Sodium Benzoate Based Nanocomposite Film and Their Antimicrobial Activity

Polymeric nanocomposites embedded with nontoxic antimicrobial agents have recently gained potential industrial significance, mainly for their applicability to preserve food quality and ensure safety. In this study, a poly(butylene adipate‐co‐terephthalate) (PBAT)/organoclay (CMMT) based nanocomposite film doped with sodium benzoate (SB) as antimicrobial agent was prepared by a solution mixing process. A homogenous dispersion of organoclay (cetyltrimethylammonium‐modified montmorillonite [CMMT]) in PBAT matrix was observed by X‐ray diffraction and transmission electron microscopy. PBAT/CMMT nanocomposite film showed higher barrier properties against water and methanol vapor compared to the PBAT film. The release of SB from PBAT and its nanocomposite film was measured and the relevant data were fitted to the Weibull model. The higher values of Weibull's shape factor and scale parameter as corroborated by experimental findings indicated faster rate of SB release from PBAT/CMMT/SB nanocomposite film, when compared to the pristine PBAT film. Bacterial inhibition studies were accomplished against 2 food pathogenic bacteria, Bacillus subtilis and Staphylococcus aureus, by determining the zone of inhibition and corresponding growth profiles. Both bacterial inhibition studies and growth profiles established that PBAT/CMMT/SB demonstrated better antimicrobial activity than PBAT/SB film. Therefore, PBAT/CMMT/SB nanocomposite film can be used for food packaging application as it showed good barrier properties and antimicrobial activity against food pathogenic bacteria.     

Effect of Ultrasonic Shot Peening on Microstructure and Mechanical Properties of High-Nitrogen Austenitic Stainless Steel

The effect of ultrasonic shot peening (USSP) was studied on microstructural modification and mechanical properties such as microhardness, yield strength, tensile strength, and low cycle fatigue (LCF) life of a nitrogen stabilized austenitic stainless steel, at room temperature. There was grain refinement up to nano scale in surface region of the shot peened specimens and the microhardness was increased markedly up to the depth of approximately 100 µm. There was insignificant increase in yield and tensile strength, but drastic reduction in LCF life, particularly at low strain amplitude, from USSP. The nominal increase in yield and tensile strength was due to grain refinement in the surface region and drastic fall in LCF life was due to surface cracking resulting from USSP.     

Size Distribution and Morphology of Liposome Aerosols Generated By Two Methodologies

Pulmonary delivery of sustained release formulations needs drug encapsulation in a suitable matrix, as well as the generation of aerosols with high lung penetration and suitable release characteristics. Nanometer sized liposomes offer the potential for biocompatibility, controlled release and easy internalization in the lung. For uniform dose delivery and drug release kinetics, it is of interest to understand generation techniques to obtain aerosols containing nearly monodispered nanometer sized dry particles. Two aerosolization techniques, air-jet atomization and electrohydrodynamic atomization (EHDA) were studied to identify conditions under which the inclusion of one-liposome-per-drop could be achieved. In air-jet atomization, low lipid concentrations resulted in a unimodal aerosol with a median mobility diameter of 94 (± 3.5) nm, while higher concentrations led to larger median diameters, implying possible inclusion of multiple liposomes per drop. In EHDA, tuning drop sizes in the range of 130 to 200 nm, as well as the use of high lipid concentrations, resulted in a bimodal aerosol distribution, with peaks at 35 and 100 nm mobility diameters. TEM images of the liposome aerosol from EDHA showed fused liposomes, resulting in cylindrical structures with different physical diameters. It was hypothesized that deformation of liposomes to cylindrical structures in the micro-capillary liquid tip of the electrospray, and interactions along the axial or cross sectional surfaces led to dry particles with different mobility sizes.     

Analysis of parallel-operated self excited induction generators

The paper presents an iterative solution for the problems related to steady state performance of self-excited induction generators operating in parallel. The analysis is based on voltage and current balance equations derived from an inverse-model for the steady state equivalent circuit of induction machines. The nonlinearity in the magnetization characteristics has been taken into account by piecewise linearisation. The proposed method is general and can be applied for analysis of any number of parallel connected machines. Theoretical predictions and experimental results are presented to study different performance characteristics of the system     

A low cost design and development of a reluctance type pressure transducer

Transmission of Bourdon gauge reading to a remote location is very important in industry. This requires a conversion of Bourdon tube displacement into an electrical signal with the help of a suitable transducer. In the present paper, a simple low cost reluctance type pressure transducer has been developed. Its theoretical analysis has been presented in the paper. The transducer has been developed and tested in the laboratory and has been found to follow the theoretical equations. The experimental results of the observed characteristics of the transducer are reported in the paper. A very good linearity and repeatability of the data has been observed.