Preparation and characterization of rubber‐toughened poly(trimethylene terephthalate)/organoclay nanocomposite

Rubber‐toughened poly(trimethylene terephthalate) (PTT)–organoclay nanocomposite (RTPTTCN) was prepared by a melt mixing technique. The rubber‐toughened PTT (RTPTT) was made by blending it with ethylene propylene diene terpolymer (EPDM) and with a small amount of maleated EPDM as a compatibilizer. XRD and TEM analysis indicated that the RTPTTCN forms a partially exfoliated nanocomposite. It was observed from SEM analysis that the clay nanoparticles induced a reduction of rubber particle size in the PTT matrix. Tensile and dynamic mechanical analysis indicated that the clay nanoparticles enhance the stiffness of the RTPTT without adversely affecting its toughness. Melt rheological studies revealed that the nanocomposites exhibited strong shear thinning behavior, and a percolated network of the clay particles was formed. It was also observed from DSC that the clay nanoparticles caused an increase in the nonisothermal crystallization temperature of the PTT. POLYM. ENG. SCI., 47:863–870, 2007. © 2007 Society of Plastics Engineers     

A kinetic study on medium temperature desulfurization using a natural manganese ore

Natural manganese ores were selected as raw materials for the desulfurization sorbent because of economical efficiency and high reactivity on hydrogen sulfide. Initial reaction rates between H₂S and desulfurization sorbent of natural manganese ores were determined in a temperature range of 400-800°C using a thermobalance reactor. All reactions were first order with respect to H₂S and were expressed by the Arrhenius relation. When the sulfidation reaction was controlled by diffusion, the temperature dependence of the effective diffusivity was given by the Arrhenius equation. Activation energies and frequency factors were obtained from the product layer diffusion coefficient of various sorbents by plotting as an Arrhenius equation form. Several additives were mixed to improve the sulfidation capacity, and NiO was the best additive.     

Water sorption of poly(vinyl alcohol)/ poly(diallyldimethylammonium chloride) interpenetrating polymer network hydrogels

Temperature‐responsive interpenetrating polymer network (IPN) hydrogels constructed with poly(vinyl alcohol) and poly(diallyldimethylammonium chloride) using the sequential IPN method were studied. The characteristics of IPN hydrogels were investigated using the dynamic vapor sorption system. IPN hydrogels exhibited a relatively high sorption ratio, 180–360% at room temperature. The sorption ratio of hydrogels depended on temperature. Diffusion coefficients were calculated according to the Fickian Law at several temperatures. The apparent activation energy was 5.43 kJ mol^?1, which corresponds to typical diffusion processes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1389–1392, 2003     

Updating the trusted connection of re-organized computing resource under the automated system management platform

The High-Performance Computing (HPC) is an infrastructure to support various research fields. The research using HPC requires big storage for large-scale of raw data and the huge computing resources to analyze. The consolidated operations of the computing center for supporting various researches using HPC are a very effective organization. The consolidated operations are able to increase the utilization. The computing center has to be re-organized continuously in order to support the various fields of research effectively and flexibly. Re-organization to reuse the limited resources enforces the update of the information for verification of the computing resources after the re-allocation of computing resources and the re-distribution of trusted connection between computing resources. Consequently, to maintain effective research support we need automated resource re-organization environment. In this paper, we build an automated update of the trusted connection for re-organized computing resource using puppet which is automated system management platform. Finally, we provide a unified verification point and efficient environment for the re-allocation and re-organization of the integrated computing center.     

A Framework for Moving Least Squares Method with Total Variation Minimizing Regularization

In this paper, we propose a computational framework to incorporate regularization terms used in regularity based variational methods into least squares based methods. In the regularity based variational approach, the image is a result of the competition between the fidelity term and a regularity term, while in the least squares based approach the image is computed as a minimizer to a constrained least squares problem. The total variation minimizing denoising scheme is an exemplary scheme of the former approach with the total variation term as the regularity term, while the moving least squares method is an exemplary scheme of the latter approach. Both approaches have appeared in the literature of image processing independently. By putting schemes from both approaches into a single framework, the resulting scheme benefits from the advantageous properties of both parties. As an example, in this paper, we propose a new denoising scheme, where the total variation minimizing term is adopted by the moving least squares method. The proposed scheme is based on splitting methods, since they make it possible to express the minimization problem as a linear system. In this paper, we employed the split Bregman scheme for its simplicity. The resulting denoising scheme overcomes the drawbacks of both schemes, i.e., the staircase artifact in the total variation minimizing based denoising and the noisy artifact in the moving least squares based denoising method. The proposed computational framework can be utilized to put various combinations of both approaches with different properties together.     

Polymerization of styrene in a continuous filled tubular reactor

Free radical solution polymerization of styrene has been studied using a binary mixture of symmetrical bifunctional initiators in a filled tubular reactor packed with static mixers. Owing to intensive radial mixing induced by the static mixers, a near plug flow pattern was obtained in the reactor with some axial dispersion effect. The axial mass dispersion coefficient was determined from the residence time distribution experiment and a dynamic axial dispersion model has been developed and solved to investigate steady state and transient behavior of the filled tubular reactor. With a solvent volume fraction of 0.3, the monomer conversion up to 70% was obtained without fouling problems in the temperature range 90 to 120°C. The experimental filled tubular reactor was operated under various reaction conditions and a reasonably good agreement between the model and the experimental data was obtained without using any adjustable parameters.     

Low‐temperature photoinitiation solution polymerization behavior of N‐vinylcarbazole in tetrahydrofuran

N‐Vinylcarbazole (VCZ) was solution‐polymerized in tetrahydrofuran (THF) at ?20, 0, and 20°C using the photoinitiation method; the effects of the amount of solvent, polymerization temperature, and photoinitiator concentration were investigated. On the whole, the experimental results corresponded to predicted ones. Low polymerization temperature using photoinitiation proved to be successful in obtaining poly(N‐vinylcarbazole) (PVCZ) of a high molecular weight with a smaller temperature rise during polymerization; nevertheless of free radical polymerization by 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN). The photo‐solution polymerization rate of VCZ in THF was proportional to the 0.47 power of ADMVN concentration. The molecular weight was higher and the molecular weight distribution was narrower with PVCZ polymerized at lower temperatures. For PVCZ prepared in THF at ?20°C using a photoinitiator concentration of 0.00005 mol/mol of VCZ, a weight‐average molecular weight of 510,000 was obtained, with a polydispersity index of 1.73, and a degree of lightness converged to about 99%. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3667–3672, 2002     

Numerical simulation of fixed-bed catalytic reactor for isopropyl alcohol synthesis

The mathematical model and the method of its numerical analysis for fixed-bed catalytic reactors were developed and were applied to the pilot reactor of isopropyl alcohol (IPA). The experimental results from pilot test runs were used to test and verify the simulation results. The numerical simulation gives the IPA concentration and temperature profiles in the reactor. The production of IPA from a commercialized ethanol rector was examined. The operation conditions of IPA synthesis were established.     

Migration of Intergranular Liquid Films and Formation of Core-Shell Grains in Sintered TiC–Ni Bonded to WC–Ni

When TiC–20 wt% Ni powder mixtures are sintered at 1400°C, relatively large TiC grains possibly containing some Ni form with near-equilibrium shapes. When these specimens are heat-treated again at 1400°C in contact with sintered WC–20 wt% Ni pieces, the liquid films between the TiC grains in the contact region migrate against their increasing curvatures, forming (Ti,W)C solid solution behind them. These migrating liquid films reverse their directions on further heat-treatment. As in other alloys, this liquid film migration must be driven by the coherency strain energy produced by W diffusion at the surface of the dissolving TiC grains. Shells of (Ti,W)C solid solution also form around the cores of TiC grains near the contact region, and this process is probably driven by both coherency strain energy and free energy of mixing. At some contact regions, (Ti,W)C precipitates nucleate and grow, probably driven mainly by the free energy of mixing. In powder mixtures, the formation of core-shell grains is expected to be driven by the coherency strain energy, the free energy of mixing, and the capillary effect.     

Effect of clinoptilolite addition and solids retention time on the extracellular polymeric substances composition and soluble chemical oxygen demands in activated sludge

This study was carried out to compare EPS (Extracellular Polymeric Substances) composition between conventional activated sludge (AS) and activated sludge dosed with clinoptilolite (CAS). Additionally, those were compared with organic removal efficiency in the effluent in conjunction with EPS concentrations. The experiments were conducted at SRT (Solids Retention Time) ranging from 5 to 100 d. For the CAS, proteins were more readily observed for SRT 20 and 100 d compared to that of the AS. Polysaccharide concentration in the sludge was greatly increased for the CAS, but it was significantly diminished when the SRT was extended. The level of EPS concentration observed from the effluent had the same pattern of variation for the two different types of systems. Regardless of type of reactor, the ratio of proteins for sludge versus effluent was independent of SRT, but the ratio of polysaccharides diminished as SRT increased. In the long run, the degree of protein synthesis directly ascribed to concurrent enhancement of SCOD removal efficiency was slightly more in the CAS. It was decided that clinoptilolite added system could be more reliably retrofitted to a conventional activated sludge process.