Thermal Diffusivity in Supercritical Fluids Measured by Thermal Lensing

Thermal diffusivities of supercritical CO₂ and C₂H₆ were determined over a wide density range with a photothermal technique. The thermal lens, formed by the degradation of the absorbed light energy as heat by the sample, allows the employment of a nonequilibrium method in the critical region. Controlling the refractive-index gradient, i.e., a density gradient, perturbations can be maintained at levels where convection is negligible. An easy-to-operate setup allowed us to measure thermal diffusivities in the density ranges 5 to 20 mol·dm^–3 for CO₂ at 308 and 313 K and 2 to 12 mol·dm^–3 for C₂H₆ at 308 K with a standard precision of 15%.     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

A high-frequency nonquasi-static analytical model including gate leakage effects for on-chip decoupling capacitors

This paper presents a compact model for on-chip decoupling capacitors (decaps) including gate-oxide leakage. The model makes use of only four parameters, namely, channel resistance, gate-oxide capacitance, and two parameters to quantify gate-oxide leakage, to predict the static and dynamic response of decaps. Quality indices have been defined to enable development of decap design guidelines and evaluation of performance of such capacitors. The model shows how the gate leakage and longer channel lengths severely affect the performance of on-chip decaps for both low and high frequencies. The model also shows that lumped models of decaps at high frequencies fail and have to be substituted by a distributed model. Application of the model uncovers tradeoffs for thin- and thick-oxide capacitors in an available 90-nm CMOS technology. For a general-purpose technology, a reference capacitance value has been realized using decaps with a discrete width and length. Our model predicts that thick-oxide n-channel (p-channel) capacitors require /spl sim/3.37x (/spl sim/3.31x) more silicon area and /spl sim/1.70x (/spl sim/1.17x) degraded time response as compared to their thin-oxide versions. The time response is even more degraded (/spl prop/L/sup 2/) when longer channel decaps are used. This paper contributes by defining performance benchmarks for decaps.     

Potential applications of poly(vinyl alcohol)‐congo red aqueous solutions and hydrogels as liquids for hydraulic fracturing

The authors report on the viscoelastic characterization of guar hydrogels obtained through complexation reactions with borax ions. These gels are compared with hydrogels obtained from poly(vinyl alcohol) of different degree of hydrolysis through complexation reactions with congo red. The effect of the degree of hydrolysis and both, the concentration of PVA and the concentration of congo red, on the viscoelastic properties of the hydrogels is analyzed. The potential use of the PVA‐based hydrogels as hydraulic fracturing liquids is discussed in relation to the commonly used fracturing liquid based on the guar–borax system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

MTCLAB: A MATLAB®-based program for traveltime quality analysis and pre-inversion velocity tuning in 2D transmission tomography

A MATLAB^®-based computer code that analyses the traveltime distribution and performs quality analysis at the pre-inversion stage for 2D transmission experiments is presented. The core tools of this approach are the so-called mean traveltime curves. For any general recording geometry, the user may select any pair of subsets of contiguous sources and receivers. The portion of the domain swept by the implied rays defines a zone of analysis, and for each source (receiver) the outcoming (incoming) ray fan is named a source (receiver) gather. The empirical mean traveltime curves are constructed, for each zone, by assigning the average and the standard deviation of the traveltimes in the gathers to the positions of the sources (receivers).The theoretical expressions assume isotropic homogeneous velocity inside each zone. The empirical counterparts use the observed traveltimes and make no assumptions. Isotropic velocity in each zone is inferred by least-squares fitting of the empirical mean traveltime curves. The user may refine the analysis considering different zones (multi-zone analysis). Initially the whole domain is modelled as a single zone. The procedure compares empirical versus theoretical curves. In addition, residuals can be plotted using source–receiver positions as plane coordinates. The results are used to unravel the possible presence of anomalous gathers, heterogeneities, anisotropies, etc. Depending on the kind of anomalies, velocity estimation and mean time residuals are different in the source and receiver gather curves.This software helps to grasp a better understanding of the data variability before the inversion and provides to the geophysicist an approximate zonal isotropic model and a range of velocity variation that can be used in the inverse problem as a priori information (regularization term). Its use is described through tutorial examples. A guided user interface leads the user through the algorithm steps.     

Laser welding of Al55-Zn coated steel sheet

A study has been made of the procedures used for the lap and butt welding of 0.62 and 1.16 mm thickness steel sheets coated with Al55-Zn alloy, using laser-beam technology. The main problems arise in lap welding as a result of zinc evaporation from the coating. The vapour pressures of this element lead to cratering and blistering of the welds which are visible from the external surface and imply severe weld defects. An efficient solution to this problem consists in leaving a gap between the internal faces, thus allowing the zinc vapours to escape. Excessive gaps, however, lead to the molten metal collapse and to lack of penetration. In the present work, acceptable results were obtained with a maximum interface separation of 0.1 mm. This allows excellent continuity of the joints, without cracks, pores or non-metallic inclusions and with moderate hardnesses, thus demonstrating the good laser weldability of the coated material. A difficulty arises, however, in relation to the coating in zones close to the weld. In these high-temperature zones the coating is lost, and in the immediately adjacent areas the coating microstructure and phases are altered, as was shown by scanning electron microscope analyses.     

Infants of diabetic mothers (IDM). II -- Fibronectin and perinatal morbidity

OBJECTIVE: The objective of this study was to determine fibronectin levels in umbilical cord blood of infants of diabetic mothers (IDM) and evaluate a possible correlation with perinatal pathology. PATIENTS AND METHODS: A prospective study of 58 IDM (33 males and 25 females) and 58 control newborns (NB) (33 males and 25 females) was carried out. RESULTS: There were no differences in fibronectin levels between the two groups nor between the sexes. Perinatal morbidity was higher in the IDM group, but there was no correlation between fibronectin levels and the presence of perinatal pathology. CONCLUSIONS: Fibronectin levels are not useful in the perinatal evaluation of infants of diabetic mothers.