Analyzing locality over a P2P computing architecture

A characteristic of Peer-to-Peer (P2P) computing networks is their huge number of different computational resources scattered across the Internet. Gathering peers into markets according to their multi-attribute computational resources makes it easier to manage these environments. This solution is known as market overlay. In this context, the closeness of the markets with similar resources, known as locality, is a key feature for ensuring good P2P resource management. Thus, the locality feature over a market overlay allows a lack of resources in a given market to be compensated quickly by any other market with similar resources, whenever these are close to each other. Consequently, locality becomes an essential challenge.This paper addresses the analysis of the locality of P2P market over-lays. According to this, a new procedure for measuring locality is applied together with an extensive analysis of some well-known structured P2P overlays. Based on this analysis, a new P2P computing architecture, named DisCoP, oriented towards optimizing locality is proposed. Our proposal gathers the peers into markets according to their computational resources. A Hilbert function is used to arrange multi-attribute markets in an ordered and mono-dimensional space and the markets are linked by means of a Bruijn graph. In order to maintain the DisCoP locality whenever the overlay is not completed, a solution based on the virtualization of markets is also proposed. Finally, the DisCoP locality is tested together with the proposed virtualization method for approximate searches over uncompleted overlays. The simulation results show that approximate searches exploit the DisCoP locality efficiently.     

pH-responsive drug delivery system based on hollow silicon dioxide micropillars coated with polyelectrolyte multilayers

We report on the fabrication of polyelectrolyte multilayer-coated hollow silicon dioxide micropillars as pH-responsive drug delivery systems. Silicon dioxide micropillars are based on macroporous silicon formed by electrochemical etching. Due to their hollow core capable of being loaded with chemically active agents, silicon dioxide micropillars provide additional function such as drug delivery system. The polyelectrolyte multilayer was assembled by the layer-by-layer technique based on the alternative deposition of cationic and anionic polyelectrolytes. The polyelectrolyte pair poly(allylamine hydrochloride) and sodium poly(styrene sulfonate) exhibited pH-responsive properties for the loading and release of a positively charged drug doxorubicin. The drug release rate was observed to be higher at pH 5.2 compared to that at pH 7.4. Furthermore, we assessed the effect of the number of polyelectrolyte bilayers on the drug release loading and release rate. Thus, this hybrid composite could be potentially applicable as a pH-controlled system for localized drug release.     

A supplemental computer-assisted intervention programme to prevent early reading difficulties in Spanish learners: A stratified random control trial

Difficulties in implementing effective instruction for at-risk students arise from two challenges: the transfer of evidence-based knowledge and the lack of economic resources. Computer-assisted programmes offer a suitable solution, providing quality instruction using low-cost resources. Thirty-two first-grade students with early learning difficulties were identified and paired based on at least three of the pre-intervention reading measures (reading efficiency of monosyllabic and disyllabic items, words, pseudowords and text reading speed). Each pair was assigned to one of two different intervention programmes: a computer-assisted intervention programme (CAIP) focused on syllables or the programme provided by the Spanish State School Assistance Services (SSAS). Every week, the CAIP participants received in pairs four 15-min training sessions on syllable decoding plus one 30-min group comprehension session. The CAIP was delivered by trainee students. The SSAS programme typically consisted of a 1-hr individual or in small groups sessions per week delivered by trained practitioners. Both programmes were administered for 11 weeks. The CAIP intervention showed better results than the SSAS intervention for both decoding and comprehension, with moderate to large effect sizes.     

Electrical and mechanical characterization by instrumented indentation technique of La0.85Sr0.15Ga0.8Mg0.2O3−δ electrolyte for SOFCs

La_0.85Sr_0.15Ga_0.8Mg_0.2O_3?δ pellets obtained by the polymeric organic complex solution method, isostatic pressing and sintering at 1350 °C have been electrical and mechanically studied. Electrical measurements evidenced reasonable ionic conductivities (0.01 S cm^?1 at 800 °C), which were comparable to those reported for the La_1?xSr_xGa_1?yMg_yO_3?δ prepared by other synthesis methods. On the other hand, the mechanical properties (elastic modulus, E and hardness, H) have been determined at micro/nanometric scale using the instrumented indentation technique. While E did not vary significantly with the increasing indentation depth (h), H values strongly decreased with the indentation depth up to 500 nm. For h > 500 nm, both mechanical properties remained almost constant, thus obtaining E = 271 ± 6 GPa and H = 13.2 ± 0.4 GPa. Finally, the residual imprints and fracture mechanisms have been observed by atomic force microscopy (AFM).     

On the Use of Static Temperature Measurements as Process Variation Observable

In this paper we present the use of static temperature measurements as process variation observable. Contrary to previously published thermal testing methods, the proposed methodology does not need an excitation signal, thus reducing test cost and improving built-in capabilities of thermal monitoring. The feasibility of the technique and a complete test methodology is presented using a narrowband LNA as example. Finally, a complete electro-thermal co-simulation test bench between the LNA and a differential temperature sensor embedded in the same silicon die is presented in order to validate the results. Results prove that RF figures of merit can be extracted from DC temperature measurements done without loading or exciting the RF circuit under test.     

Structural,Micromechanical and Tribological Characterization of Zn–Ni Coatings: Effect of Sulfate Bath Composition

Zn and Zn–Ni alloy coatings were electrodeposited on mild steel from sulfate-based bath containing Sn as additive. The effect of Ni content on the microstructure, morphology, microhardness and the tribological behavior of these coatings were studied and discussed. Adding Sn in the sulfate bath had a significant effect on the surface morphology, particularly on the Zn–8 wt% Ni coatings. By increasing the Ni concentration from 8 to 14 wt%, the X-ray patterns showed that the phase structure of Zn–Ni alloy coatings was changed from η-phase Ni₃Zn₂₂ to γ-phase Ni₅Zn₂₁. The plastic deformation and delamination were found to be wear mechanisms for the investigated coatings. While the Zn–14 wt% Ni alloys had the best wear resistance, Zn films had the most severe wear volume loss and the highest friction coefficient.     

Optimising by the response surface methodology the enzymatic elimination of clogging of a microfiltration membrane by pectin cake

The aim of this paper, in which clogging occurs on the filter at a constant vacuum pressure and constant pectin weight, is to find the optimal values of the variables, temperature and time, to know the best conditions to reduce this clogging by enzymatic hydrolysis. Moreover, different properties of the compression of the cake in the filter were determined such as the filtering medium total resistance (R_fT), bed porosity (ε) and the cake‐specific resistance (α) at different times and temperatures. The filter area was 0.142 m², and the value of the mass fraction of solids in the filtered suspension (S) was 0.12. Scanning electron microsopy (SEM) analyses were performed. The results showed that the compressive stress corresponding to the cake improves the flow rate in the filtration flux at the optimal temperature and time for the process, where the enzyme reaches its highest activity. The test results of this study can be applied in different system of filters during cross‐flow filtration.     

Stability during storage of LC-PUFA-supplemented infant formula containing single cell oil or egg yolk

The medical community recommends that infant formulae should mimic human milk as far as possible, particularly in regards to long-chain polyunsaturated fatty acids (LC-PUFA). These include arachidonic acid (AA) and docosahexaenoic acid (DHA), both of which provide biochemical and functional benefits to neonates. However, LC-PUFAs are highly susceptible to oxidation and the composition of formulae must be carefully controlled. In this study, the stability of two types of LC-PUFA-supplemented milk-based powdered infant formula was evaluated over the course of 18 months storage at 25 °C and 40 °C. One contained egg yolk phospholipids (IF-EPL) and the other contained triacylglycerides (DHA and AA) synthesized by single cell oils (IF-SCO). The following parameters were monitored: peroxide values, volatile content (propanal, pentanal and hexanal), fatty acid profiles, and potential and free furfural content (5-hydroxymethyl-2-furaldehyde and 2-furaldehyde). In addition, these formulae were subjected to sensory evaluations by a panel of experts. The parameters studied revealed acceptable lipid stability in both types of formula, with better results for IF-EPL. At the end of the study period, significant deficits (p < 0.05) in linoleic acid were noted in both formulae. However, no significant decreases were observed in the other fatty acids, including AA and DHA. In regards to furfural content, both formulae exhibited a similar increase, indicative of the typical Maillard reaction characteristic of products stored for long periods.