Testing of the multi-application small light water reactor (MASLWR) passive safety systems

Experimental thermal hydraulic research has been conducted at Oregon State University for the purpose of assessing the performance of a new reactor design concept, the multi-application small light water reactor (MASLWR). The MASLWR is a pressurized light water reactor design with a net output of 35 MWe that uses natural circulation in both normal and transient operation. Due to its small size, portability and modularity, the MASLWR design is well suited to help fill the potential need for grid appropriate reactor designs for smaller electricity grids as may be found in developing or remote regions. The purpose of the OSU MASLWR test facility is to assess the operation of the MASLWR under normal full operating pressure and full temperature conditions and to assess the passive safety systems under transient conditions. The data generated by the testing program will be used to assess computer code calculations and to provide a better understanding of the thermal-hydraulic phenomena in the design of the MASLWR NSSS. During this testing program, four tests were conducted at the OSU MASLWR test facility. These tests included one design basis accident and one beyond design basis accident. During the performance of these tests, plant operations to include start up, normal operation and shut down evolutions were demonstrated successfully.     

SBLOCA long term cooling procedure for the integral type PWR

An advanced integral-type pressurized water reactor (IPWR) with a maximum thermal power of 65 MW has been developed at the Korea Atomic Energy Research Institute (KAERI). This 65 MW IPWR enhances the safety and reliability by adopting inherent safety design characteristics and an advanced passive design feature.     

Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.     

A novel bidirectional CMOS transceiver for chip-to-chip optical interconnects

A novel bidirectional complementary metal-oxide-semiconductor (CMOS) transceiver for chip-to-chip optical interconnects operating at 2.5 Gb/s is proposed, which shares the common block of a receiver and a transmitter on a single chip. The share of the common block of two circuits makes it possible to save 55% or 20% of power dissipation, depending on the operating mode. The chip in 0.18-/spl mu/m CMOS technology occupies an area of 0.82/spl times/0.82 mm/sup 2/, 70% of the total area of a typical unshared transceiver chip. The transmitting and receiving modes of operation show -3-dB bandwidths of 2.2 and 2.4 GHz and electrical isolations of -28 and -40 dB, respectively.     

Drying of persimmons (Diospyros kaki L.) and the following changes in the studied bioactive compounds and the total radical scavenging activities

Fresh persimmons were subjected to two different processes: sun-drying during 1 month and dehydration at 60 °C during 12 h. To assess the effect of this process on nutritional and health-related properties of persimmons dietary fibers, minerals, trace elements, polyphenols and the total radical scavenging activities (TRSAs) were determined before and after processing. It was found that the contents of dietary fibers, minerals and trace elements in fresh and dried persimmons fruits were comparable. Total polyphenols in fresh persimmons was higher than in dried fruits (1.3 vs. 0.9 and 0.8 mg/100 g FW, respectively) and percentage of inhibition was higher than in dried fruits (70% vs. 59% and 55% and 58% vs. 53% and 46% for 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2′-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) [ABTS] radicals, respectively (P>0.05 in all cases). In conclusion: (1) the differences in the contents of dietary fibers, minerals and trace elements in fresh and dried persimmons are not significant; (2) the contents of polyphenols and the level of the TRSA are higher in fresh persimmons than in dried fruits; however, both variables are also high in dried persimmons; (3) when fresh fruits are not available, proper dried persimmons could be used as a valuable substitute.     

Feature Reduction via Generalized Uncorrelated Linear Discriminant Analysis

High-dimensional data appear in many applications of data mining, machine learning, and bioinformatics. Feature reduction is commonly applied as a preprocessing step to overcome the curse of dimensionality. Uncorrelated Linear Discriminant Analysis (ULDA) was recently proposed for feature reduction. The extracted features via ULDA were shown to be statistically uncorrelated, which is desirable for many applications. In this paper, an algorithm called ULDA/QR is proposed to simplify the previous implementation of ULDA. Then, the ULDA/GSVD algorithm is proposed, based on a novel optimization criterion, to address the singularity problem which occurs in undersampled problems, where the data dimension is larger than the sample size. The criterion used is the regularized version of the one in ULDA/QR. Surprisingly, our theoretical result shows that the solution to ULDA/GSVD is independent of the value of the regularization parameter. Experimental results on various types of data sets are reported to show the effectiveness of the proposed algorithm and to compare it with other commonly used feature reduction algorithms.     

Improvement of device performances by thin interlayer in conjugated polymers/methanofullerene plastic solar cell

Recent studies have reported that a thin interlayer between poly(3, 4-ethylene dioxythiophene)-poly(styrene sulfonic acid) (PEDOT: PSS) and an emissive polymer layer leads to a large increase in the performances of polymer light-emitting diodes (PLEDs) by preventing significant quenching of the radiative excitons at the PEDOT: PSS interface; therefore, acting as an efficient exciton-blocking layer. Using the similar idea, a thin interlayer was fabricated between PEDOT: PSS and the active layer of conjugated polymers/methanofullerene composites in a plastic solar cell. The interlayer consisted of a poly(fluorene)-based hole transporter spin-coated directly on top of the PEDOT: PSS layer. The devices with the interlayer exhibited a higher efficiency than in those without the interlayer.     

alpha B-crystallin and hsp25 in neonatal cardiac cells--differences in cellular localization under stress conditions

OBJECTIVES: The aim of this study was to determine (a) whether delay in femur fracture stabilization beyond twenty-four hours in patients with head injury increased the risk of pulmonary complications and (b) whether immediate (up to twenty-four hours) femur fracture stabilization increased the risk of central nervous system (CNS) complications. DESIGN: Retrospective analysis. MATERIALS AND METHODS: Thirty-two patients with femur fracture and head injury were identified. Fourteen underwent immediate stabilization of their fractures, and eighteen underwent delayed (four-teen patients) or no (four patients) stabilization of their fractures. RESULTS: In the immediate stabilization group, five patients had severe head injuries [Glasgow Coma Score (GCS) < or = 8] and nine had mild head injuries (GCS > 8). In the mild head injury group, no patient had a pulmonary complication and one had a CNS complication. In the severely head-injured group, one patient had a pulmonary complication and no patient had a CNS complication. In the delayed stabilization group, six patients had mild head injuries (GCS > 8) and twelve had severe head injuries (GCS < or = 8). In the mildly head injured group, one patient had a pulmonary complication, two patients had CNS complications, and one patient died. In the severely head injured group, nine patients had pulmonary complications, three patients had CNS complications, and one patient died. Logistic regression identified delay in femur stabilization as the strongest predictor of pulmonary complication (p = 0.0042), followed by severity of chest Abbreviated Injury Score (AIS; p = 0.0057) and head AIS (p = 0.0133). Delaying fracture stabilization made pulmonary complications forty-five times more likely. Each point increase in the chest AIS and head/neck AIS increased the risk of pulmonary complication by 300 percent and 500 percent, respectively. A statistically significant predictor of CNS complications could not be identified by using logistic regression. CONCLUSION: Delay in stabilization of femur fracture in head-injured patients appears to increase the risk of pulmonary complications. However, due to selection bias in this patient sample, this question cannot be definitively answered. Early fracture stabilization did not increase the prevalence of CNS complications.