Composition of chlorinated hydrocarbon contaminants among major adipose tissue depots of polar bears (Ursus maritimus) from the Canadian high Arctic

Monitoring of environmental contaminants in Canadian Arctic polar bears (Ursus maritimus) typically has used superficial adipose tissue samples collected as part of controlled native subsistence hunts. However, little attention has been paid to the compositional difference in contaminants that may exist among the major adipose depots that are routinely collected. To address this knowledge gap, we investigated the profiles and concentrations of chlorinated hydrocarbon contaminants (CHCs), including major polychlorinated biphenyl (PCB) congeners and organochlorine (OC) pesticides and metabolites, in six major adipose depots (i.e. superficial, inter-muscular and intra-abdominal regions) obtained from adult male polar bears in the vicinity of Resolute Bay, Canadian high Arctic. Concentrations and congener patterns of PCBs (20 congeners) and OCs (14 compounds; chlordanes and dichlorodiphenyltrichloroethanes and metabolites, chlorinated benzenes, hexachlorocyclohexane isomers, octachlorostyrene and dieldrin) were found to be relatively uniform throughout the adipose tissue of male polar bears. The only exception was the inter-muscular adipose depot from the cervical region, which was characterized, compared to other major depots routinely sampled, by lower proportions of higher-chlorinated and recalcitrant congeners such as CB170/190, 180, 194 and 206, and higher contribution of the lower-chlorinated PCBs, CB47, 74 and 99. No difference in the OC makeup and concentrations was found among the adipose depots investigated. In view of this, we conclude that the determination of CHCs in adipose tissue of polar bears from any major depots, with the potential exception of the fat under the neck muscles, would give a representative picture of the overall CHC composition and concentrations in polar bear fat for purpose of trend monitoring.     

电弧炉粉尘等温还原的动力学研究

为使还原条件与实际电弧炉生产相接近,在等温条件下对电弧炉粉尘球团的还原过程动力学进行了研究。电弧炉粉尘与还原剂碳和粘接剂石灰均匀混合后制粒,经干燥后将球闭置于恒定温度的加热炉中,利用电子称定时对球团重量进行检测。金属还原率的计算中,考虑了球团的失重、铅和锌在高温下挥发。经研究,电弧炉粉尘的还原分为二个阶段,还原初期由化学反应控制而还原后期由扩散控制,并建立了每一阶段的还原动力学方程,确定了有关的动力学参数表观活化能和频率因子。     

Fabrication of Long Lengths of Epitaxial Buffer Layers on Biaxially Textured Nickel Substrates Using a Continuous Reel-to-Reel Dip-Coating Unit

A low-cost, nonvacuum, solution precursor route has been developed to produce epitaxial oxide buffer layers of Eu₂O₃ or La₂Zr₂O₇ on biaxially textured Ni (100) tapes. A reel-to-reel continuous dip-coating unit consisting of a constant-tension tape transport system attached to a controlled atmosphere furnace was fabricated. Nickel tapes were pulled through a 2-methoxyethanol solution of europium methoxyethoxide/acetate or lanthanum zirconium methoxyethoxide. The double-sided dip-coated tapes were then annealed in a preheated furnace at 1000°–1100°C with a high flow rate of Ar/H₂ (4%) gas. The dip-coated buffers were dense, continuous, crack-free, and epitaxial with a single cube texture. A critical current ( J _c) of >1 MA/cm² at 77 K and self-field was obtained for YBa₂Cu₃O_7-δ (YBCO) films with a layer sequence of YBCO ( ex situ BaF₂ process)/CeO₂ (sputtered)/YSZ (sputtered)/Eu₂O₃ (dip-coated)/nickel. We have produced 1–2 m lengths of epitaxial buffer layers on textured nickel substrates using a nonvacuum process for the first time.     

Fast ping‐pong arbitration for input–output queued packet switches

Input–output queued switches have been widely considered as the most feasible solution for large capacity packet switches and IP routers. In this paper, we propose a ping‐pong arbitration scheme (PPA) for output contention resolution in input–output queued switches. The challenge is to develop a high speed and cost‐effective arbitration scheme in order to maximize the switch throughput and delay performance for supporting multimedia services with various quality‐of‐service (QoS) requirements. The basic idea is to divide the inputs into groups and apply arbitration recursively. Our recursive arbiter is hierarchically structured, consisting of multiple small‐size arbiters at each layer. The arbitration time of an n‐input switch is proportional to log₄?n/2? when we group every two inputs or every two input groups at each layer. We present a 256×256 terabit crossbar multicast packet switch using the PPA. The design shows that our scheme can reduce the arbitration time of the 256×256 switch to 11 gates delay, demonstrating the arbitration is no longer the bottleneck limiting the switch capacity. The priority handling in arbitration is also addressed. Copyright © 2001 John Wiley & Sons, Ltd.     

Microwave joining of two long hollow tubes: an asymptotic theory and numerical simulations

A nonlinear heat equation which models the microwave assisted joining of two large SiC tubes is analyzed. By exploiting the small fineness ratio of the structure and disparate time scales an asymptotic theory for this problem is systematically deduced. Specifically, a one-dimensional nonlinear heat equation is described which governs the temperature in the outer region. This is a numerically well posed problem and it is efficiently solved using standard methods. This solution is not valid in the inner region which includes the microwave source. An inner asymptotic approximation is derived to describe the temperature in this region. This approximation yields two unknown functions which are determined from matching to the outer solution. The results of the asymptotic theory are compared to calculations done on the full problem. Since the full problem is numerically ill conditioned, the asymptotic theory yields enormous savings in computational time and effort.     

电弧炉粉尘球团直接还原的热传导模型

对电弧炉炼钢粉尘加上还原剂碳混合制粒成的球团还原过程的热传导行为进行了研究,根据实验推导了球团导热模型的结构参数,并试图建立热传导模型。     

Electric arc furnace dust non-isothermal reduction kinetics

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅａｉｒｂｏｒｎｅｆｉｎｅｐａｒｔｉｃｕｌａｔｅＥｌｅｃｔｒｉｃＡｒｃＦｕｒ ｎａｃｅ (ＥＡＦ)ｄｕｓｔｉｓｇｅｎｅｒａｔｅｄｉｎｔｈｅｓｔｅｅｌｍａｎｕｆａｃｔｕｒ ｉｎｇｐｒｏｃｅｓｓｗｈｅｎｓｃｒａｐｉｓｅｌｅｃｔｒｉｃａｌｌｙｍｅｌｔｅｄ .Ｉｔｉｓｃｏｎｓｉｄｅｒｅｄａｓａｈａｚａｒｄｏｕｓｗａｓｔｅｂｅｃａｕｓｅｏｆｌｅａｃｈｉｎｇｃｈａｒａｃｔｅｒｉｓｔｉｃｏｆｈｅａｖｙｍｅｔａｌｓｓｕｃｈａｓｌｅａｄ ,ｚｉｎｃａｎｄｃｈｒｏｍｉｕｍ ,ｗｈｉｃｈａｒｅ ｐ…     

Physiologic Insulin Resensitization as a Treatment Modality for Insulin Resistance Pathophysiology

Prevalence of type 2 diabetes increased from 2.5% of the US population in 1990 to 10.5% in 2018. This creates a major public health problem, due to increases in long-term complications of diabetes, including neuropathy, retinopathy, nephropathy, skin ulcers, amputations, and atherosclerotic cardiovascular disease. In this review, we evaluated the scientific basis that supports the use of physiologic insulin resensitization. Insulin resistance is the primary cause of type 2 diabetes. Insulin resistance leads to increasing insulin secretion, leading to beta-cell exhaustion or burnout. This triggers a cascade leading to islet cell destruction and the long-term complications of type 2 diabetes. Concurrent with insulin resistance, the regular bursts of insulin from the pancreas become irregular. This has been treated by the precise administration of insulin more physiologically. There is consistent evidence that this treatment modality can reverse the diabetes-associated complications of neuropathy, diabetic ulcers, nephropathy, and retinopathy, and that it lowers HbA1c. In conclusion, physiologic insulin resensitization has a persuasive scientific basis, significant treatment potential, and likely cost benefits.     

Bilayer-mediated assembly of cationic nanoparticles adsorbed to lipid bilayers: Insights from molecular simulations

Understanding interactions between functionalized gold nanoparticles (NPs) and lipid bilayers is essential for biomedical applications. Experiments have shown that NPs that are stable in solution can assemble into clusters when adsorbed to a lipid bilayer, suggesting that bilayer-mediated interactions facilitate assembly. In this work, we use coarse-grained molecular dynamics simulations to study bilayer-mediated interactions between NPs adsorbed to single- and multicomponent lipid bilayers. We perform unbiased simulations and umbrella sampling calculations using an implicit solvent force field to determine the thermodynamic contributions to assembly. We show that bilayer-mediated interactions drive the assembly of NPs into linear aggregates on liquid-disordered bilayers, which we attribute to a reduction in bilayer curvature. Similar bilayer-mediated interactions induce the alignment of NP clusters with phase boundaries in phase-separated bilayers. Together, these simulation results provide new physical insight into the balance of forces that dictate the assembly of charged NPs at multicomponent lipid bilayer interfaces.