Comparing offset curve approximation methods

Offset curves have diverse engineering applications, spurring extensive research on various offset techniques. In a paper on offset curve approximation (Lee et al., 1996), we suggested a new approach based on approximating the offset circle instead of the offset curve itself. To demonstrate the effectiveness of this approach, we compared it extensively with previous methods. To our surprise, Tiller and Hanson's (1984) simple method outperforms other methods for offsetting (piecewise) quadratic curves, even though its performance is not as good for high degree curves. The experimental results revealed other interesting facts, too. Had these details been reported several years ago, we believe offset approximation research might have developed somewhat differently. This article is intended to fill an important gap in the literature. We conducted qualitative as well as quantitative comparisons employing various contemporary offset approximation methods for freeform curves in the plane. We measured the efficiency of the offset approximation in terms of the number of control points generated while making the approximations within a prescribed tolerance     

Rat heart-aorta cluster transplantation: a novel model to study transplant rejection

The purpose of this study was to develop a microsurgical cluster model of heart plus entire thoracic aorta transplantation and to compare it to the isolated model of heart transplantation as a tool to study transplant rejection. Thirty-six syngeneic (DA x DA and Lew x Lew) and allogeneic (DA x PVG and DA x Lew) cluster heart-aorta transplants were compared to 43 syngeneic and allogeneic isolated heart grafts. Graft survival, recipient survival and histological data on myocardial and aortic tissues were assessed. There was no statistically significant difference in graft survival between the two models studied (P > 0.05). In the cluster transplants, the aortic component was spared the severity of acute rejection noted for the myocardial counterpart. In conclusion, the results demonstrated that the cluster model was technically feasible and highly reproducible. Additionally, it was possible to apply this model to the study of experimental allograft rejection using novel immunosuppressants. The success of the cluster model in strongly mismatched transplant strain combinations underscores its potential for application in slower rejection combinations, making it particularly suited for chronic rejection studies. The inherent capacity for sampling a broader range of vessel sizes in one animal makes the cluster model more suitable than the isolated models of aorta or heart for application to experimental protocols.     

Resorbable calcium phosphate bone substitute

Bacteroides fragilis strains isolated from different sources, i.e. 1 strain (AA1) from an aquatic environment, 1 strain from normal flora (118310) and the type strain (ATCC 25285) originally isolated from clinical material, were analysed for both cell envelope proteins composition and surviving under oxidative stress starvation. All strains examined showed a similar survival response when cultured in drinking water with a ten-fold decrease in viable counts per day during the 7 days of analysis. The outer membrane protein (OMP) profiles of all strains were quite similar during the stress period as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). However, the periplasmic proteins of the strain 118310 showed two protein bands at 48 and 58 kDa, respectively, that were absent in the strains AA1 and ATCC 25285 during the incubation period in potable water. Whole cells and periplasmic 35S-labelled proteins from bacteria cultured in drinking water showed a significant increase in proteins at 16, 18, 24, 26, 35, 48, and 58 kDa and 18, 22, 24, 48, 58, and 70 kDa, respectively, in all strains when compared to cells grown in BHI-PRAS media as detected by autoradiography following SDS-PAGE. These data suggest that B. fragilis may have a synthesis mechanism that allows them to adapt to adverse environments.     

淮南矿区煤的甲烷吸附性研究

以淮南矿区Ｃ１３、Ｂ１１ｂ、Ｂ１０、Ｂ４ｂ和Ａ３煤为研究对象，从中精选出精煤、壳质暗煤、惰性暗煤及构造煤，采用重量法，分别测定它们的甲烷吸附量，研究煤的甲烷吸附性。     

Restoration of X-ray and etoposide resistance, Ku-end binding activity and V(D) J recombination to the Chinese hamster sxi-3 mutant by a hamster Ku86 cDNA

Ku is a heterodimeric protein composed of 86 and 70 kDa subunits that binds preferentially to the double-stranded ends of DNA. Recent molecular characterization of ionizing-radiation sensitive (IRs) mutants belonging to the XRCC5 complementation group demonstrated the involvement of Ku in DNA double-strand break (DSB) repair and lymphoid V(D)J recombination. Here, we describe the isolation of a full-length hamster cDNA encoding the large subunit of the Ku heterodimer and demonstrate that the stable expression of this cDNA can functionally restore IR, Ku DNA end-binding activity and V(D)J recombination proficiency in the Chinese hamster IRs sxi-3 mutant. Moreover, we also demonstrate that sxi-3 cells are hypersensitive to etoposide, a DNA topoisomerase II inhibitor, and that resistance to this drug was restored by the Ku86 cDNA. These experiments suggest that a defect in the large subunit of the heterodimeric Ku protein is the sole factor responsible for the known defects of sxi-3 cells and our data of further support the role of Ku in DNA DSB repair and V(D)J recombination.     

Dichotomous behavior of polymer melts in isothermal melt spinning

Isothermal melt spinning experiments have been conducted using two polyethylene melts of low density (LDPE) and high density (HDPE) to produce steady state spinline profiles. The data revealed the threadline extensional viscosity exhibiting a contrasting picture : extension thickening behavior for LDPE and extension thinning one for HDPE. A White-Metzner model having a strain rate-dependent relaxation time was then found to be able to simulate this dichotomy in melt spinning fairly well: the fluids whose relaxation times have smaller strain rate-dependence can fit LDPE data with extension thickening extensional viscosity whereas the fluids whose relaxation times have larger strain rate-dependence can fit HDPE data with extension thinning extensional viscosity. This dichotomous nature of viscoelastic fluids is also believed to be able to explain other similar contrasting phenomena exhibited by polymer melts, such as vortex/no vortex in entry flows, cohesive/ductile fracture modes in extension, and more/less stable draw resonance than Newtonian fluids.     

ON THE SLOW MANIFOLD CHARACTERISTICS OF CAPILLARY SUCTION APPARATUS DYNAMICS

The nonlinear dynamic behaviour relating the wet front size and liquid saturation under inner cylinder (or rectangular cell) in cylindrical (or rectangular) capillary suction apparatus was investigated. The slow manifold explanation was proposed and the fast- and slow-varying variables were identified. Experiments were conducted to verify theoretical findings.     

复相陶瓷导电性与其粒径级配的关系研究

通过对无序渗流模型的修正，建立了具有不同特征尺寸的两相无序体系的导电模型，推导了相关关系式，将其结果与相复合导电陶瓷的实验结果进行了比较，结论相当一致。由此揭示了陶瓷生料的两相粒径分布对复合导电陶瓷导电性的影响。     

Hot-carrier degradation of submicrometer p-MOSFETs withthermal/LPCVD composite oxide

It is shown that while gate oxides containing thermal/LPCVD composite oxide have lower defect densities than gates using only thermal oxides, they are more susceptible to hot-carrier degradation. The hot-carrier-induced degradation of composite oxides is worse in p-channel MOSFETs than in n-channel MOSFETs. This sensitivity of p-channel MOSFETs is caused by higher electron trapping levels in LPCVD oxides. For 150-Å gate technology, the hot-carrier-degradation resistance of thermal/LPCVD composite gate oxides with a 70-Å or thicker thermal oxide layer approaches that of high-quality pure thermal oxide     

Comparison of Superplastic Formabiliity Predictions Using 2-D Plane Strain and 3-D Modeling

Computational simulations of superplastic forming by 2-D plane strain including simple analytical and finite element and 3-D finite element modeling were compared with each other. The piece being formed was a rectangular pan with a female die. The effect of die entrance radii upon pressurization rate and thickness distribution was examined. Experimental work was conducted on superplastic aluminum-lithium 8090 material for comparison with predictions from simulations.