Diamino telechelic polybutadienes for solventless styrene-butadiene-styrene (SBS) triblock copolymer formation

High molecular weight, high functionality diamino telechelic polybutadienes (TPBs) were synthesized by ring-opening metathesis polymerization (ROMP) of 1,5-cyclooctadiene (COD) in the presence of a chain transfer agent, 1,8-dicyano-4-octene, followed by lithium aluminum hydride reduction. Melt coupling of diamino TPB with anhydride-terminated polystyrene (PS-anh) resulted in the formation of styrene-butadiene-styrene (SBS) triblock copolymers; ca. 80% maximum conversion of PS-anh was achieved within 30 s. The results from SAXS, TEM, and rheological measurements of the coupling products confirmed the formation of SBS triblock copolymers having lamellar morphology. A fluorescent-labeled PS-anh was used to study the coupling kinetics by diluting the reactants by the addition of non-functional PS.     

Effects of tube rupture modeling and the parameters on the analysis of multiple steam generator tube rupture event progression in APR1400

A multiple steam generator tube rupture (MSGTR) event in APR1400 has been investigated using the best estimate thermal hydraulic system code, MARS1.4. The effects of the parameters such as the number of ruptured tubes, rupture location, affected steam generator on the analysis of the MSGTR event in APR1400 are examined. In particular, tube rupture modeling methods, single tube modeling (STM) and double tube modeling (DTM), are compared. The APR1400 is found to have the capability of allowing more than 30 min to operators for the MSGTR event of five tubes. The effects of rupture location on the MSSV lift time is not significant in the case of STM, but the MSSV lift time for tube-top rupture is found to be 25.3% larger than that for rupture at the hot-leg side tube sheet in the case of DTM. The MSSV lift time for the cases that both steam generators are affected (4C5x, 4C23x) are found to be larger than that of the single steam generator cases (4A5x, 4B5x) due to a bifurcation of the primary leak flow. The discharge coefficient of Cd is found to affect the MSSV lift time only for a smaller value of 0.5. It is found that the most dominant parameter governing the MSSV lift time is the leak flow rate. Whether any modeling method is used, it gives the similar MSSV lift time if the leak flow rate is close, except in the case where both steam generators are affected. Therefore, the system performance and the MSSV lift time of the APR1400 are strongly dependent on the break flow model used in the best estimate system code.     

High affinity hormone binding to the extracellular N-terminal exodomain of the follicle-stimulating hormone receptor is critically modulated by exoloop 3

The human follicle-stimulating hormone receptor (FSH-R) consists of two distinct domains of >330 amino acids, the N-terminal extracellular exodomain and membrane-associated endodomain. The exodomain alone binds hormone with high affinity, whereas the endodomain is the site of receptor activation. Coordination of these two domains is essential for successful hormone action but little is known about their functional and structural relationship. In this communication, we report that exoloop 3 of FSH-R constrains follicle-stimulating hormone binding to the exodomain. When the FSH-R exodomain was prepared by truncating its endodomain, the hormone binding affinity of the exodomain was slightly improved, compared with the wild type receptor. The binding affinity was further improved by >3-fold when the exodomain was attached to the membrane-associated domain of CD8. These results suggest that the FSH-R endodomain attenuates hormone binding at the exodomain. As a first step to test this hypothesis, the 11 amino acids except Ala589 of exoloop 3 were individually substituted with Ala. Ala substitution for Leu583 or Ile584 improved the hormone binding affinity by 4-6-fold while totally abolishing cAMP induction, indicating an inverse relationship. The Ala substitution for Lys580 or Pro582 had a similar trend but to a lesser extent. This significant improvement in the binding affinity suggests that the four residues at the N-terminal region of exoloop 3 interact with the exodomain and constrain the hormone binding in the wild type receptor. This effect is specific since substitutions for other than the 4 residues did not improve the hormone binding affinity. Computer modeling shows that the 4 residues can be positioned on one side of exoloop 3. This result and the apparent inverse relationship of hormone binding and cAMP induction suggest that these two essential functions may work against each other. Therefore, hormone binding might be compromised to preserve cAMP inducibility while maintaining a reasonably high, but below maximum, binding affinity.     

Java语言及其虚拟机技术探讨

随着Internet的迅猛发展，Internet编程语言Java愈来愈成为计算机行业的焦点。本文在简述了Java的主要特点后，重点对Java最关键的技术──虚拟机进行了深入的探讨。     

Mapping field density distribution in radiators by microwave noise

In his earlier paper on Active Microwave Radiometry, the author indicated that microwave noise can be used to map field density distribution inside radiators and in antenna systems, without the need for anechoic chambers. The presented paper gives details and results of such experiment. The method is described, details of equipment are given and results are presented with a concluding commentary.     

CH_4、CO_2与O_2制合成气的研究 Ⅱ工艺条件的影响

在固定床反应器中考察了１２％Ｎｉ－５％ＲＥ－２％Ｃｕ－２％Ｌｉ／Ａｌ２Ｏ３（ｍａｓｓ）催化剂在ＣＨ４、ＣＯ２与Ｏ２催化氧化重整制合成气反应中催化剂粒径、工艺操作条件（空速与温度）及原料气配比对反应的影响，确定了较佳的操作条件：催化剂粒径２０～４０目，反应最佳温度为８００℃，ＳＶ＝４×１０４ｍｌ／（ｇ·ｈ）。同时看到在不同的原料气配比的条件下该催化剂的活性亦很稳定，不仅达到了反应平衡，且产物Ｖ（ＣＯ）／Ｖ（Ｈ２）比有很强的调变性。     

Thermal properties and crystalline structure of liquid crystalline poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate)

Thermal properties and crystalline structure of liquid crystalline (LC) poly(ethylene terephthalate‐co‐2(3)‐chloro‐1,4‐phenylene terephthalate) [copoly(ET/CPT)] were investigated using differential scanning calorimetry (DSC), thermogravimetry (TGA), limiting oxygen index (LOI) measurement, electron dispersive X‐ray analysis (EDX), X‐ray diffractometry, and infrared spectrometry (IR). The thermal transition temperatures of copoly(ET/CPT) were changed with the composition. Copoly(ET/CPT) showed two thermal decomposition steps and the residues at 700°C and LOI values of copoly(ET/CPT) were almost proportional to its chlorine content. The activation energy of thermal decomposition of LC units was very low compared to that of poly(ethylene terephthalate)(PET) units. Crystal structure of copoly(ET/CPT) (20/80) was of triclinic system with the lattice constants of a = 9.98 A?, b = 8.78 A?, c = 12.93 A?, α = 97.4°, β = 96.1°, and γ = 90.8°, which is very close to that of poly(chloro‐p‐phenylene terephthlate) (PCPT) with the lattice constants of a = 9.51 A?, b = 8.61 A?, c = 12.73 A?, α = 96.8°, β = 95.4°, and γ = 90.8°. When copoly(ET/CPT)(50/50) was annealed at 220°C in vacuum, crystallization induced sequential reordering (CISR) was not observed but the heat of fusion was slightly increased due to the increase of the trans isomer content in PET units. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1286–1294, 2002; DOI 10.1002/app.10451     

用熵方程证明全不可逆循环揭示的Clausius方程式

利用不可逆循环图代替传统的半不可逆循环推导出Clausius积分式，并用熵方程证明之，得出可逆过程膨胀功大于不可逆过程膨胀功。     

C－BN衬底上金刚石的异质外延生长研究

用热灯丝ＣＶＤ方法在Ｃ－ＢＮ单晶衬底上制备出金刚石膜，并且在Ｃ－ＢＮ（１００）面上观察到金刚石的异质外延。