Vortex characteristics due to nozzle clogging in water caster mould: modelling and validation

In continuous slab casting, clogging in the submerged entry nozzle (SEN) ports leads to flow asymmetry and vortex formation in the mould. Knowledge of vortexing and its influence on product quality is fundamental for defect-free production. In this study, the interconnected effects of nozzle clogging and SEN submergence depth, variation on flow asymmetry and vortex characteristics in a 0.4 scale water caster have been characterised by CFD investigation and validated with experimental results from the authors’ previous work. Mean flow velocities at the sub-meniscus and near the port exit predicted by the computational model are compared with the time-averaged values of the impeller probe velocity measurements and found to be in reasonable agreement. Three different clogging conditions (0, 33 and 66% in the left port of the SEN) for SEN submergence depth of 60?mm are studied and the 66% clogging produced vortices having largest diameter, which is consistent with the experimental observations. The effects of SEN submergence depth on flow asymmetry and vortexing are investigated with three different conditions – 40, 60 and 80?mm. It is found that the shallow SEN submergence depth (40?mm) produces vortices of largest diameter and the flow is most stable for a SEN submergence depth of 60?mm among the three cases. Vortex bending towards the SEN as noticed in the experimental observations is also observed in the computational study. This work illustrates the possibility of capturing features of vortexing using validated CFD model.     

Microbial and chemical assessment of regions within New Orleans, LA impacted by Hurricane Katrina

The city of New Orleans, LA was severely impacted by flooding and wind damage following landfall of Hurricane Katrina in August 2005. The city's drinking water infrastructure was severely compromised and massive amounts of sediment were redeposited throughout the flooded region. Thousands of homes were water-damaged resulting in the rapid growth of mold. In September and October 2005 a convenience sample of selected homes, tap water, surface water, and sediment within New Orleans was assessed for mold contamination, microbial contamination, and heavy metal concentrations. At selected sites, indoor mold spore concentrations were compared to outdoor concentrations. The purpose of this study was to conduct a baseline environmental assessment in an effort to identify public health threats caused by wind and flood damage. Surface waters contained high concentrations of bacterial indicators whereas no bacteria were detected in tap water, even from taps containing no chlorine residual. Sediment samples contained concentrations of lead and arsenic similarto pre-Katrina concentrations. Outdoor total spore (sp) concentrations ranged from >6500 to 84 713 sp/m(3). Indoor concentrations ranged from 6142 to 735 123 sp/m(3). For the 13 locations with matched indoor/ outdoor samples, the mean indoor/outdoor spore ratio was 4.11 (ranging from 0.27 to >11.44). Inside 5 of the 13 homes, total spore counts/m(3) exceeded 100 000, with measurements in the moldiest home exceeding 700 000 sp/ m(3). In conclusion, surface waters had high concentrations of bacterial contamination but no bacterial indicators were present in tap water. Sediment samples did not have appreciable increases in lead or arsenic. Flooded homes, however, contained substantial concentrations of mold which could present a public health exposure route to individuals repopulating and restoring the City of New Orleans.     

Aroma profiles of five basil (Ocimum basilicum L.) cultivars grown under conventional and organic conditions

A headspace solid-phase microextraction (HS-SPME) method coupled to gas chromatography–ion trap mass spectrometry (GC–ITMS) has been developed and applied for profiling of volatile compounds released from five Ocimum basilicum L. cultivars grown under both organic and conventional conditions. Comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC×GC–TOFMS) was employed for confirmation of identity of volatiles extracted from the basil headspace by SPME.     

Emulsifying properties of β-lactoglobulin and Quillaja bark saponin mixtures: Effects of number of homogenization passes,pH, and NaCl concentration

The effects of number of homogenization passes, pH, and NaCl concentration on the formation and stability of oil-in-water emulsions comprising a mixture of a biosurfactant (Quillaja bark saponin) and a globular protein (β-lactoglobulin) were investigated. The emulsions were characterized as to visual appearance, droplet size, droplet surface charge, and rheology. The emulsions obtained by different conditions (4, 6, or 8 passes; pH 7, 8, or 9; and 0, 100, or 200 mmol L^?1 of NaCl) were polydisperse, presented relatively small average droplet sizes (z-average < 323 nm) as well as negative droplet charge (between –20 and –79.6 mV) in all evaluated conditions. Regardless of the number of homogenization passes, the emulsions exhibited low apparent viscosity and pseudoplastic behavior with small yield stress. Viscoelastic behavior was also observed, thus the emulsions were characterized as weak gels. Four homogenization passes were enough to obtain small droplets in the evaluated conditions. Droplet size was not significantly affected by NaCl concentration and pH (p > 0.05). On the other hand, the absolute ζ-potential values significantly decreased and increased upon increased NaCl content and pH, respectively. Regardless of the tested conditions, all emulsions had good stability against phase separation and droplet aggregation, since no significant changes in average droplet size were observed throughout storage (p > 0.05). In the presence of NaCl, in which droplet charge significantly decreased, emulsion was also stable. Thus, we can conclude that electrostatic repulsion as well as steric repulsion was responsible for stabilization.     

Impact of electrically formed interfacial layer and improved memory characteristics of IrOx/high-κx/W structures containing AlOx,GdOx, HfOx,and TaOx switching materials

Improved switching characteristics were obtained from high-κ oxides AlO_x, GdO_x, HfO_x, and TaO_x in IrO_x/high-κ_x/W structures because of a layer that formed at the IrO_x/high-κ_x interface under external positive bias. The surface roughness and morphology of the bottom electrode in these devices were observed by atomic force microscopy. Device size was investigated using high-resolution transmission electron microscopy. More than 100 repeatable consecutive switching cycles were observed for positive-formatted memory devices compared with that of the negative-formatted devices (only five unstable cycles) because it contained an electrically formed interfacial layer that controlled ‘SET/RESET’ current overshoot. This phenomenon was independent of the switching material in the device. The electrically formed oxygen-rich interfacial layer at the IrO_x/high-κ_x interface improved switching in both via-hole and cross-point structures. The switching mechanism was attributed to filamentary conduction and oxygen ion migration. Using the positive-formatted design approach, cross-point memory in an IrO_x/AlO_x/W structure was fabricated. This cross-point memory exhibited forming-free, uniform switching for >1,000 consecutive dc cycles with a small voltage/current operation of ±2 V/200 μA and high yield of >95% switchable with a large resistance ratio of >100. These properties make this cross-point memory particularly promising for high-density applications. Furthermore, this memory device also showed multilevel capability with a switching current as low as 10 μA and a RESET current of 137 μA, good pulse read endurance of each level (>10⁵ cycles), and data retention of >10⁴ s at a low current compliance of 50 μA at 85°C. Our improvement of the switching characteristics of this resistive memory device will aid in the design of memory stacks for practical applications.     

Redox potentials and binding enhancement of fullerene and fullerene-cyclodextrin systems in water and dimethylsulfoxide

The formal redox potentials of electron transfer reactions of fullerene, methanofullerene, fullerene-cyclodextrin complex and methanofullerene conjugates with cyclodextrins in aqueous and dimethylsulfoxide solutions are reported. These new compounds are surface active and retain the redox activity of C₆₀ even in aqueous medium. Compounds have been characterized by an electrochemical admittance technique, which offers an advantage of separating faradaic and capacitive properties. Observed difference of formal redox potentials of the free fullerene forms and their cyclodextrin-containing compounds were used to determine the binding enhancement. Results are interpreted in terms of inter-molecular host-guest interactions of C₆₀-cyclodextrin conjugates.     

Derivation and validation of a binary multi-fluid Eulerian model for fluidized beds

The paper presents a multi-fluid Eulerian model derived from binary kinetic theory of granular flows, free path theory and an empirical friction theory. The effects of the inter- and inner-particle collisions, particle translational motions and particle–particle friction are included. As the effects due to fluiddynamic particle velocity differences and particle–particle friction are considered, some unconventional terms are produced compared with the previous models. Model validation using the data from Mathiesen et al. (2000) shows that the coupling terms give a stronger and more realistic particle–particle coupling because the effects due to the fluiddynamic velocity differences are considered. The model gives reasonable predictions of the particle volume fraction, particle velocities and velocity fluctuations. The model analysis reveals that the basic particle velocity fluctuations constitute 2 terms: the velocity fluctuations of the discrete particles, and the velocity fluctuations of the continuous fluid flow. Furthermore, the simulation results show that the velocity fluctuations of the continuous fluid flow are dominant in a binary riser flow.     

Neighborhood sociodemographics and change in built infrastructure

While increasing evidence suggests an association between physical infrastructure in neighborhoods and health outcomes, relatively little research examines how neighborhoods change physically over time and how these physical improvements are spatially distributed across populations. This paper describes the change over 25 years (1985–2010) in bicycle lanes, off-road trails, bus transit service and parks, and spatial clusters of changes in these domains relative to neighborhood sociodemographics in four US cities that are diverse in terms of geography, size, and population. Across all four cities we identified increases in bicycle lanes, off-road trails, and bus transit service, with spatial clustering in these changes that related to neighborhood sociodemographics. Overall, we found evidence of positive changes in physical infrastructure commonly identified as supportive of physical activity. However, the patterning of infrastructure change by sociodemographic change encourages attention to the equity in infrastructure improvements across neighborhoods.     

Modulatory Effects of Biosynthesized Gold Nanoparticles Conjugated with Curcumin and Paclitaxel on Tumorigenesis and Metastatic Pathways—In Vitro and In Vivo Studies

Background: Breast cancer is the most common cancer in women globally, and diagnosing it early and finding potential drug candidates against multi-drug resistant metastatic breast cancers provide the possibilities of better treatment and extending life. Methods: The current study aimed to evaluate the synergistic anti-metastatic activity of Curcumin (Cur) and Paclitaxel (Pacli) individually, the combination of Curcumin–Paclitaxel (CP), and also in conjugation with gold nanoparticles (AuNP–Curcumin (Au-C), AuNP–Paclitaxel (Au-P), and AuNP–Curcumin–Paclitaxel (Au-CP)) in various in vitro and in vivo models. Results: The results from combination treatments of CP and Au-CP demonstrated excellent synergistic cytotoxic effects in triple-negative breast cancer cell lines (MDA MB 231 and 4T1) in in vitro and in vivo mouse models. Detailed mechanistic studies were performed that reveal that the anti-cancer effects were associated with the downregulation of the expression of VEGF, CYCLIN-D1, and STAT-3 genes and upregulation of the apoptotic Caspase-9 gene. The group of mice that received CP combination therapy (with and without gold nanoparticles) showed a significant reduction in the size of tumor when compared to the Pacli alone treatment and control groups. Conclusions: Together, the results suggest that the delivery of gold conjugated Au-CP formulations may help in modulating the outcomes of chemotherapy. The present study is well supported with observations from cell-based assays, molecular and histopathological analyses.     

Thermoelastic study of a functionally graded annular fin with variable thermal parameters using semiexact solution

Abstract

In this paper, the thermoelastic behavior of a functionally graded material (FGM) annular fin is investigated. The material properties of the annular fin are assumed to vary radially. The heat transfer coefficient and internal heat generation are considered to be functions of temperature. A closed form solution of nonlinear heat transfer equation for the FGM fin is obtained using the homotopy perturbation method (HPM) which leads to nonuniform temperature distributions within the fin. The temperature field is then coupled with the classical theory of elasticity and the associated thermal stresses are derived analytically. For the correctness of the present closed form solution for the stress field, the results are compared with the ANSYS-based finite element method (FEM) solution. The present HPM-based closed form solution of the stress field exhibits a good agreement with the FEM results. The effect of various thermal parameters such as the thermogeometric parameter, conduction-radiation parameter, internal heat generation parameter, coefficient of variation of thermal conductivity, and the coefficient of thermal expansion on the thermal stresses are discussed. The results are presented in both nondimensional and dimensional form. The dimensional stress analysis discloses the suitability of FGM as the fin material in practical applications.