The use of hybrid constructed wetlands for wastewater treatment with special attention to nitrogen removal: A review of a recent development

The hybrid systems were developed in the 1960s but their use increased only during the late 1990s and in the 2000s mostly because of more stringent discharge limits for nitrogen and also more complex wastewaters treated in constructed wetlands (CWs). The early hybrid CWs consisted of several stages of vertical flow (VF) followed by several stages of horizontal flow (HF) beds. During the 1990s, HF–VF and VF–HF hybrid systems were introduced. However, to achieve higher removal of total nitrogen or to treat more complex industrial and agricultural wastewaters other types of hybrid constructed wetlands including free water surface (FWS) CWs and multistage CWs have recently been used as well. The survey of 60 hybrid constructed wetlands from 24 countries reported after 2003 revealed that hybrid constructed wetlands are primarily used on Europe and in Asia while in other continents their use is limited. The most commonly used hybrid system is a VF–HF constructed wetland which has been used for treatment of both sewage and industrial wastewaters. On the other hand, the use of a HF–VF system has been reported only for treatment of municipal sewage. Out of 60 surveyed hybrid systems, 38 have been designed to treat municipal sewage while 22 hybrid systems were designed to treat various industrial and agricultural wastewaters. The more detailed analysis revealed that VF–HF hybrid constructed wetlands are slightly more efficient in ammonia removal than hybrid systems with FWS CWs, HF–VF systems or multistage VF and HF hybrid CWs. All types of hybrid CWs are comparable with single VF CWs in terms of NH₄-N removal rates. On the other hand, CWs with FWS units remove substantially more total nitrogen as compared to other types of hybrid constructed wetlands. However, all types of hybrid constructed wetlands are more efficient in total nitrogen removal than single HF or VF constructed wetlands.     

Filter‐ versus wrapper‐based feature selection for credit scoring

We address the problem of credit scoring as a classification and feature subset selection problem. Based on the current framework of sophisticated feature selection methods, we identify features that contain the most relevant information to distinguish good loan payers from bad loan payers. The feature selection methods are validated on several real‐world datasets with different types of classifiers. We show the advantages following from using the subspace approach to classification. We discuss many practical issues related to the applicability of feature selection methods. We show and discuss some difficulties that used to be insufficiently emphasized in standard feature selection literature. © 2005 Wiley Periodicals, Inc. Int J Int Syst 20: 985–999, 2005.     

A multi-level model-driven regime for value-added tax compliance in ERP systems

As the economy becomes global and ICT-reliant, approaches practiced in enterprise software product development and enterprise resource planning (ERP) system implementation must cope with increasingly complex situations induced by contemporary supply chain and regulations. Compliance with regulations in the market is one aspect of the requirements that enterprise software must meet. Recent research of KPMG IT Advisory has confirmed that where little attention is being paid to the value-added tax (VAT) issues during large ERP projects, there is a higher VAT-risk exposure. In a design-oriented approach, we first identify the stakeholders and their interests in the VAT compliance of ERP systems. Enterprise architecture (EA) and model driven engineering in a multi-level perspective serve as the source of solution patterns. The efficient solution of compliance problems builds upon stakeholders utilizing a set of interdependent models and methods that are suitably allocated to the public and proprietary domains.     

Improved passive-matrix multiplexability with a modular display and UTCP technology

One of the major problems with PM displays is that, depending on the used display material, only a limited number of lines can be multiplexed. We developed a new driving technology and display setup that takes care of that problem. We divided the display into several independent parts or modules. Each module acts as an individual display and has its own display driver. With the use of the new ultra-thin chip package (UTCP), these driver chips can be embedded into the (flexible) display itself. This paper explains the setup of the fully modular display and describes the basic structure of the display drivers and its components.     

Attentional effects on preattentive vision: Spatial precues affect the detection of simple features.

Most accounts of visual perception hold that the detection of primitive features occurs preattentively, in parallel across the visual field. Evidence that preattentive vision operates without attentional limitations comes from visual search tasks in which the detection of the presence or absence of a primitive feature is independent of the number of stimuli in a display. If the detection of primitive features occurs preattentively, in parallel and without capacity limitations, then it should not matter where attention is located in the visual field. The present study shows that even though the detection of a red element in an array of gray elements occurred in parallel without capacity limitations, the allocation of attention did have a large effect on search performance. If attention was directed to a particular region of the display and the target feature was presented elsewhere, response latencies increased. Results indicate that the classic view of preattentive vision requires revision. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Solving production scheduling with earliness/tardiness penalties by constraint programming

This paper deals with an application of constraint programming in production scheduling with earliness and tardiness penalties that reflects the scheduling part of the Just-In-Time inventory strategy. Two scheduling problems are studied, an industrial case study problem of lacquer production scheduling, and also the job-shop scheduling problem with earliness/tardiness costs. The paper presents two algorithms that help the constraint programming solver to find solutions of these complex problems. The first algorithm, called the cost directed initialization, performs a greedy initialization of the search tree. The second one, called the time reversing transformation and designed for lacquer production scheduling, reformulates the problem to be more easily searchable when the default search or the cost directed initialization is used. The conducted experiments, using case study instances and randomly generated problem instances, show that our algorithms outperform generic approaches, and on average give better results than other nontrivial algorithms.     

Antifungal activity of lauric acid derivatives against Aspergillus niger

The antifungal effects of lauric acid and four lauric acid derivatives (monolauroylglycerol, D-laurate A, T-laurate A, 6-O-lauroysucrose) were tested on the spore germination and the growth rate of Aspergillus niger DMF 0801. The results showed that the tested substances varied in their antifungal activity and they also confirmed the relation of the structure of tested substances and their antifungal effects. Monolauroylglycerol at concentration level between 0.2 and 1.8 mmol l^-1 caused the highest inhibition of spore outgrowths whereas 6-O-lauroysucrose at concentration between 0.05 and 1.8 mmol l^-1 did not exhibit inhibition of spore germination. The inhibition of colony growth rate was detected mainly at presence of 6-O-lauroysucrose.     

Incremental Dynamics

A new system of dynamic logic is introduced and motivated, witha novel approach to variable binding for incremental interpretation. Thesystem is shown to be equivalent to first order logic and complete.The new logic combines the dynamic binding idea from DynamicPredicate Logic with De Bruijn style variable free indexing. Quantifiersbind the next available variable register; the indexing mechanismguarantees that active registers are never overwritten by newquantifiers actions. Apart from its interest in its own right, theresulting system has certain advantages over Dynamic Predicate Logic orDiscourse Representation Theory. It comes with a more well behaved(i.e., transitive) consequence relation, it gives a more explicitaccount of how anaphoric context grows as text gets processed, and ityields new insight into the dynamics of anaphoric linking in reasoning.Incremental dynamics also points to a new way of handling contextdynamically in Montague grammar.     

Convexity Rule for Shape Decomposition Based on Discrete Contour Evolution

We concentrate here on decomposition of 2D objects into meaningfulparts of visual form, orvisual parts. It is a simple observation that convex parts of objects determine visual parts. However, the problem is that many significant visual parts are not convex, since a visual part may have concavities. We solve this problem by identifying convex parts at different stages of a proposed contour evolution method in which significant visual parts will become convex object parts at higher stages of the evolution. We obtain a novel rule for decomposition of 2D objects into visual parts, called the hierarchical convexity rule, which states that visual parts are enclosed by maximal convex (with respect to the object) boundary arcs at different stages of the contour evolution. This rule determines not only parts of boundary curves but directly the visual parts of objects. Moreover, the stages of the evolution hierarchy induce a hierarchical structure of the visual parts. The more advanced the stage of contour evolution, the more significant is the shape contribution of the obtained visual parts.