Analytical pyrolysis as a tool for the study of plastic coals

The technique of analytical pyrolysis has been used to characterize 40 similar mid-rank western Kentucky coals of widely differing ASTM Gieseler plasticity. Certain pyrolysis/g.c. variables were shown to correlate well with both ASTM Gieseler and isothermal plasticity. Highly plastic coals were shown to exhibit certain characteristic peaks in the 450 °C pyrogram which were absent in the pyrogram of the non-plastic coals. Two coals, representing the two extremes in plasticity, were selected for further study. After extraction with solvents such as DMF the characteristic peaks were absent in the 450 °C pyrogram of the extraction residue of the highly plastic coal. These peaks were also shown to decrease with increasing severity of air oxidation of the plastic coal. This technique appears to be a useful tool for the analysis of mid-rank plastic coals and supports the view that the substances contained in the bitumen fraction of these coals are involved in the development of the plastic state.     

Studies of elemental distributions within discrete coal macerals: Use of secondary ion mass spectrometry and X-ray photoelectron spectroscopy

Secondary ion mass spectrometry has been used to measure qualitatively the distributions of many trace and minor elements within some well-characterized coal macerals: vitrinite, fusinite and exinite. Complementary information was obtained by using X-ray photoelectron spectroscopy. Within the vitrinite specimens studied, a widely-dispersed largely inorganic aluminosilicate phase was identified, which contained a number of other trace elements. By contrast, within the organic-rich phase of this macerai, titanium was detected in a very even distribution; this suggests that some titanium may be bonded in an organic complex. The fusinite was shown to contain elevated concentrations of calcium, magnesium and fluorine, dispersed over a large portion of the maceral. The high fluorine content could be identified as an organo-fluoro compound using XPS. Exinite was found to contain lower concentrations of most elements, compared to other macerals. The organic composition of this maceral was significantly different from that of surrounding macerals; this could be seen from the enhanced emission of the C₂H₂-secondary ion and images of this ion thus clearly outlined the position of such macerals.     

Acrylonitrile-based copolymers: Synthesis,characterization, and formation of ultrafiltration membranes utilized for the immobilization of proteins

Various high molecular weight copolymers of acrylonitrile and a vinyl comonomer containing an aryl amine, a pyridine, or an aliphatic hydroxyl group were synthesized via slurry polymerization techniques so as to contain from 1 to 15 mol % functional comonomer. The comonomer content was quantitated by ultraviolet absorbance, base titration of acid polymer salts, and/or relative chemical reactivity with trichloro-s-triazine. Thin films were cast from copolymer solutions, coagulated into unsupported ultrafiltration membrances, and characterized with respect to both water permeability and pore size distribution. Analysis by size exclusion chromatography of the membrane permeate of a pool of dextran fractions yielded a continuous distribution curve for membrane pore size over the range 1.5 to 70 nm. The ultrafiltration membranes were used for protein immobilization after appropriate chemical activation. The three distinct types of functional copolymers gave comparable results for α-chymotrypsin, with protein weight loadings of 6–12% and 40–65% retention of enzymatic specific activity.     

Ferrocene-bound polyester resins

Seven ferrocene-bound polyester resins were prepared from fumaric acid and diethylene glycol in the presence of different ferrocene derivatives. To accomplish the incorporation of the organometallic moiety into the polyester resin chain, the cyclopentadienyl rings of ferrocene were substituted in the 1,1′ positions with reactive functional groups. The ferrocene derivatives used were: 1,1′-bis(1-hydroxyethyl) ferrocene 1 , 1,1′-ferrocene dicarboxylic acid 2 , and 1,1′-ferrocene diacetic acid 3 . The incorporation of an organometallic complex significantly increased the rate of the polyesterification process. In order of increasing rate enhancement, the effect was 2 < 3 < 1 . The effectiveness of ferrocene derivatives chemically incorporated into the polyester backbone during copolymerization with styrene was studied by monitoring the gel time, cure rate, and the resin properties. The efficiency of the copolymerization reaction of ferrocene-bound polymers with styrene decreased in the order 1 ≥ 3 > 2 . Mechanisms to account for these results are presented. Some of the strength related properties were also studied.     

Neuropsychological functioning and personality characteristics of migrainous and nonmigrainous female college students.

Examined the theory that chronic migraine headaches can lead to permanent changes in brain function in 71 female college students. Ss were 20 classic migraineurs, 27 common migraineurs, and 24 controls. No significant group differences were found on the Halstead Reitan Neuropsychological Test Battery and additional memory tests. Classic migraineurs had significantly higher scores than common migraineurs on the Hysteria and Paranoia scales of the Minnesota Multiphasic Personality Inventory (MMPI) and significantly higher scores than the controls on Hypochondriasis and Hysteria scales. Explanations for the lack of cognitive deficits in this group are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

High-load, squeeze action linear bearings with beam deflection

The literature provides little information on high-speed, high-normal-load, plain linear bearings, although the case for two rigid surfaces in relative linear motion can readily be solved by assuming squeeze action resistance. A new genus of internal combustion engines based on the Stiller-Smith mechanism incorporates connecting rods constrained by linear bearings, with the central normal load on the rod restricted by an oil film. A general analysis takes into account the bending of the rod, when the distributed oil film pressure resists the distributed load on the elastic rod. Design charts result that yield the dimensionless velocity at which the rod sinks in the oil as a function of the dimensionless load and the bearing clearance, and predict the deflection of the beam. The rod clearance history simulations for the Stiller-Smith engine compare favourably with computations for the rigid beam, confirming the analysis technique.     

Transmission electron microscopic analysis of kidney glomeruli obtained by fine-needle aspiration

Aspiration biopsy of tumors and transplanted organs is a popular atraumatic method for diagnosis and also for the management of patients. Apart from the cytological analyses, it is clear that large aggregates of cells are obtained and these may be examined by electron microscopy. A study was carried out with dogs to assess the yield of intact glomeruli and tubules, resulting from a standard fine-needle aspiration procedure. Employing a 20-gauge needle, yields of approximately ten intact glomeruli were obtained with a tissue processing protocol that utilized filtration through a nylon mesh and backwashing, to resuspend the trapped aggregates. Processing for electron microscopy was carried out in microcentrifuge tubes. The ultrastructural preservation was excellent and the extension of these studies to investigations of not only renal transplantation, but also for diagnosis in human renal diseases of a broad spectrum, is suggested.     

Limitations on the uses of multimedia exposure measurements for multipathway exposure assessment--Part II: Effects of missing data and imprecision.

Multimedia data from two probability-based exposure studies were investigated in terms of how missing data and measurement-error imprecision affected estimation of population parameters and associations. Missing data resulted mainly from individuals'refusing to participate in certain measurement activities, rather than from field or laboratory problems; it suggests that future studies should focus on methods for maximizing participation rates. Measurement error variances computed from duplicate-sample data were small relative to the inherent variation in the populations; consequently, adjustments in nonparametric percentile estimates to account for measurement imprecision were small. Methods of adjustment based on lognormality assumptions, however, appeared to perform poorly.     

The effect of solidification time and heat treatment on the fatigue properties of a cast 319 aluminum alloy

Solidification time and heat treatment are known to have a large effect on the microstructure of cast aluminum alloys. This study was conducted to quantify how the fatigue properties of a 319-type aluminum alloy are affected by solidification time and heat treatment. Both porosity-containing (non-hot isostatically pressed (HIP)) and porosity-free (HIP) samples in the T6 (“peak aged”) or T7 (“overaged”) heattreated conditions were tested. As the solidification time increased, the average initiating pore diameter increased and stress-controlled fatigue life decreased. Heat treatment was observed to have a large effect on fatigue properties of the HIP samples. However, in the non-HIP fatigue samples, heat treatment did not significantly change the fatigue life or fatigue strength of the cast 319-type alloy. The absence of an influence of heat treatment on fatigue response is attributed to the predominance of the microporosity in fatigue crack initiation in cast aluminum.     

Multifamily Housing Characteristics and Tenant Satisfaction

This paper examines the long-term impact of structural features and physical amenities on the residential satisfaction of renters in multifamily housing. A cumulative logit analysis of 7,206 rented multifamily units in the 2005 American Housing Survey indicates that features creating separated space (additional room, bathroom, garage/carport, or balcony/patio) were associated with significantly higher satisfaction, even when holding total unit area constant. Conversely, violation of space separation by noise intrusion through walls, floors, or ceilings created dramatically negative effects. Other amenities such as a fireplace, disposal, or dishwasher had no statistically significant impact. Tracking a cohort of 5,170 rented multifamily units from 1997 to 2005 revealed somewhat similar effects on the satisfaction trajectory of residents during this period. More bathrooms, bedrooms, and other rooms, as well as the presence of a balcony/patio were associated with satisfaction improvements. Analyzing cohort units undergoing modifications during the tracking period revealed that the addition of a bathroom or central air conditioning had the clearest impact on satisfaction, followed by the addition of a balcony/patio, other room, dishwasher, or garage/carport.