Chromium doping as a new approach to improve the cycling performance at high temperature of 5 V LiNi0.5Mn1.5O4-based positive electrode

LiCr_2YNi_0.5−YMn_1.5−YO₄ (0 < Y ≤ 0.2) spinels have been synthesized by a sucrose-aided combustion method. Two sets of Cr-doped samples have been obtained by heating the “as-prepared” samples at 700 and 900 °C for 1 h. X-ray diffraction and thermogravimetric data show that pure and single phase spinels with similar lattice parameter have been synthesized. The homogeneity and the sub-micrometric particle size of the spinels have been shown by SEM and TEM. The main effect of the temperature is to increase the particle size from ≈50 to ≈500 nm, on heating from 700 to 900 °C. The study of the influence of Cr-dopant content and thermal treatment on the electrochemical properties at 25 °C and at 55 °C has been carried out by galvanostatic cycling in Li-cells. The discharge capacity (≈130 mAh g⁻¹) does not noticeably change with the synthesis conditions; but the cycling performances are strongly modified. Key factors that control the cycling performances have been determined. The most highlighted result is that spinels heated at 900 °C with Y ≤ 0.1 have very high capacity retention at 55 °C (>96% after 40 cycles, cyclability >99.9% by cycle) indicating that metal doping is a new approach to prepare 5 V LiNi_0.5Mn_1.5O₅-based cathodes with excellent cycling performances at high temperature.     

Capability indices and nonconforming proportion in univariate and multivariate processes

The main usefulness of a capability index is to relate the actual variability of the process with the admissible one. This admissible variability is, in turn, related with the nonconforming proportion. Hence, the capability index should be closely related to the nonconforming proportion. In univariate and centered processes, the classical C _p index explicitly admits this interpretation. For instance, if C _p ?=?0.5, the standard deviation should be reduced to 50% to attain C _p ?=?1. However, for noncentered processes and multivariate processes, there is a lack of capability indices that admit such an interpretation. This article fills this gap in the literature and proposes univariate and multivariate capability indices that have a direct interpretation of how much the variability of the process should increase or decrease to attain a unitary index. Some numerical examples are used to compare the proposed indices with the existing ones, showing the advantages of the proposals.     

Process Parameters Development of Selective Laser Melting of Lunar Regolith for On‐Site Manufacturing Applications

Selective Laser Melting (SLM) is a candidate for on‐site manufacturing as its characteristics of energy source and powder‐based fabrication process are suitable for use with in situ material. The feasibility of using lunar regolith simulant to create objects with SLM process is investigated in this study. The process parameters are optimized and multiple objects are fabricated. A qualitative chemical analysis is carried out with scanning electron microscopy using energy‐dispersive X‐ray emission. Lastly, properties such as particle size distribution, particle shape, and crystal structure of the lunar simulant powder as well as the crystallinity and hardness of the fabricated objects are investigated.     

Ultrathin PECVD epitaxial Si solar cells on glass via low‐temperature transfer process

Fabrication of high‐quality ultrathin monocrystalline silicon layers and their transfer to low‐cost substrates are key steps for flexible electronics and photovoltaics. In this work, we demonstrate a low‐temperature and low‐cost process for ultrathin silicon solar cells. By using standard plasma‐enhanced chemical vapor deposition (PECVD), we grow high‐quality epitaxial silicon layers (epi‐PECVD) from SiH₄/H₂ gas mixtures at 175 °C. Using secondary ion mass spectrometry and transmission electron microscopy, we show that the porosity of the epi‐PECVD/crystalline silicon interface can be tuned by controlling the hydrogen accumulation there. Moreover, we demonstrate that 13–14% porosity is a threshold above which the interface becomes fragile and can easily be cleaved. Taking advantage of the H‐rich interface fragility, we demonstrate the transfer of large areas (∽10 cm²) ultrathin epi‐PECVD layers (0.5–5.5 µm) onto glass substrates by anodic bonding and moderate annealing (275–350 °C). The structural properties of transferred layers are assessed, and the first PECVD epitaxial silicon solar cells transferred on glass are characterized. Copyright © 2016 John Wiley & Sons, Ltd.     

Selenomethionine increases proliferation and reduces apoptosis in bovine mammary epithelial cells under oxidative stress

The decline in mammary epithelial cell number as lactation progresses may be due, in part, to oxidative stress. Selenium is an integral component of several antioxidant enzymes. The present study was conducted to examine the effect of oxidative stress and selenomethionine (SeMet) on morphology, viability, apoptosis, and proliferation of bovine mammary epithelial cells (BMEC) in primary culture. Cells were isolated from mammary glands of lactating dairy cows and grown for 3 d in a low-serum gel system containing lactogenic hormones and 0 or 100 μM H₂O₂ with 0, 10, 20, or 50 nM SeMet. Hydrogen peroxide stress increased intracellular H₂O₂ to 3 times control concentrations and induced a loss of cuboidal morphology, cell-cell contact, and viability of BMEC by 25%. Apoptotic cell number more than doubled during oxidative stress, but proliferating cell number was not affected. Supplementation with SeMet increased glutathione peroxidase activity 2-fold and restored intracellular H₂O₂ to control levels with a concomitant return of morphology and viability to normal. Apoptotic BMEC number was decreased 76% below control levels by SeMet and proliferating cell number was increased 4.2-fold. These findings suggest that SeMet modulated apoptosis and proliferation independently of a selenoprotein-mediated reduction of H₂O₂. In conclusion, SeMet supplementation protects BMEC from H₂O₂-induced apoptosis and increased proliferation and cell viability under conditions of oxidative stress.     

Determination of Ca,Cd, Cu,Fe, K,Mg, Mn,Mo, Na,Se, and Zn in Foodstuffs by Atomic Spectrometry After Sample Preparation Using a Low-Cost Closed-Vessel Conductively Heated Digestion System

Establishing fast, simple, low-cost, and efficient sample preparation procedures to determine elements in foodstuffs is a relevant aspect for nutritional and health purposes. For this reason, the recently proposed closed-vessel conductively heated digestion system (CHDS) was evaluated for the digestion of milk powder, chocolate powder, and soluble coffee samples aiming for Ca, Cu, Fe, K, Mg, Mn, Na, and Zn determinations by high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS) and Cd, Mo, and Se determinations by inductively coupled plasma mass spectrometry with tandem configuration (ICP-MS/MS). The accuracy was evaluated by analyzing two milk certified reference materials digested by the CHDS and a microwave oven for comparison. When using the CHDS, recoveries for the analytes varied from 91 to 104 %. For microwave digestions, recoveries within the 94–109 % intervals were obtained. The method was then applied to the samples. For comparative purposes, the analytes were also determined in the samples after microwave digestion, and the results between the two digestion systems showed no differences based on a paired t test at a 95 % confidence level. Similar analytical blanks were obtained because quartz digestion tubes were used in both digestion systems. The CHDS with quartz tubes is an interesting alternative for laboratories dedicated to large-scale routine analysis because volatile elements usually found in very low concentrations in food samples such as Cd and Se can also be determined.     

Quality Enhancement of Chilled Fish by Including Alga <Emphasis Type="Italic">Bifurcaria bifurcata</Emphasis> Extract in the Icing Medium

Bifurcaria bifurcata is a widely extended brown macroalga, whose antimicrobial and antioxidant properties have previously been described. In this study, ethanolic extracts of B. bifurcata were included in the icing medium employed for the chilled storage of megrim (Lepidorhombus whiffiagonis). For it, two different concentrations of this brown macroalga extract (0.67 and 2.50 g lyophilized alga L^?1 aqueous solution; B-1 and B-2 batches, respectively) were tested for a 14-day storage. The effect of the alga extract was compared with a counterpart batch stored in traditional ice prepared only from water (B-0 batch). Significant (p < 0.05) inhibitions of microbial activity (aerobes, psychrotrophs, lipolytic bacteria, proteolytic bacteria and Enterobacteriaceae) as well as of pH and trimethylamine formation were observed as a result of the incorporation of the alga extract in the icing medium, being this effect especially relevant in the B-2 batch. Concerning lipid damage development, a significantly (p < 0.05) lower formation of free fatty acids (lipid hydrolysis development) and of fluorescent compounds (tertiary lipid oxidation development) in samples corresponding to both alga-including batches could also be observed; this inhibitory effect was more intense in fish belonging to the B-2 batch. The icing medium proposed in this work constitutes a promising strategy in order to apply algae extracts to enhance fish quality retention during the different steps of storage and commercialization of marine species.