Impact of Blend Morphology on Interface State Recombination in Bulk Heterojunction Organic Solar Cells

This work is a reinvestigation of the impact of blend morphology and thermal annealing on the electrical performance of regioregular‐P3HT:PC₆₀BM bulk heterojunction organic solar cells. The morphological, structural, and electrical properties of the blend are experimentally investigated with atomic force microscopy, X‐ray diffraction, and time‐of‐flight measurements. Current–voltage characteristics of photodiode devices are measured in the dark and under illumination. Finally, the existence of exponential electronic band tails due to gap states is experimentally confirmed by measuring the device spectral response in the subband gap regime. This method reveals the existence of a large density of gap states, which is partially and systematically reduced by thermal annealing. When the band tails are properly accounted for in the drift and diffusion simulations, experimentally measured charge transport characteristics, under both dark and illuminated conditions and as a function of annealing time, can be satisfactorily reproduced. This work further confirms the critical impact of tails states on the performance of solar cells.     

High efficiency removal of dissolved As(III) using iron nanoparticle-embedded macroporous polymer composites

Novel nanocomposite materials where iron nanoparticles are embedded into the walls of a macroporous polymer were produced and their efficiency for the removal of As(III) from aqueous media was studied. Nanocomposite gels containing α-Fe₂O₃ and Fe₃O₄ nanoparticles were prepared by cryopolymerisation resulting in a monolithic structure with large interconnected pores up to 100 μm in diameter and possessing a high permeability (ca. 3 × 10⁻³ m s⁻¹). The nanocomposite devices showed excellent capability for the removal of trace concentrations of As(III) from solution, with a total capacity of up to 3 mg As/g of nanoparticles. The leaching of iron was minimal and the device could operate in a pH range 3-9 without diminishing removal efficiency. The effect of competing ions such as SO₄²⁻ and PO₄³⁻ was negligible. The macroporous composites can be easily configured into a variety of shapes and structures and the polymer matrix can be selected from a variety of monomers, offering high potential as flexible metal cation remediation devices.     

Dielectric and piezoelectric properties of PbFe1/2Nb1/2O3-PbTiO3 ceramics from the morphotropic phase boundary compositional range

Dielectric, X-ray, and piezoelectric studies of highly-resistive Li-doped (1-x)PbFe(1/2)Nb(1/2)O(3)-(x)PbTiO(3) (PFN-xPT) ceramics from the 0 ≤ x ≤ 0.2 range fabricated by solid-state synthesis and usual sintering have been carried out. Distinct anomalies of dielectric and piezoelectric parameters, corresponding to the transition between rhombohedral (monoclinic) and tetragonal ferroelectric phases, have been observed in pure PFN and PFN-xPT compositions with PbTiO(3) content up to 8 mol.%. The x,T-phase diagram of the PFN-xPT solid solution system has been constructed using these data.     

Enhanced antibacterial effect of silver nanoparticles obtained by electrochemical synthesis in poly(amide-hydroxyurethane) media

In the present study, we report enhanced antimicrobial properties of 29 and 23 nm silver nanoparticles (Ag NPs) obtained by electrochemical synthesis in poly(amide-hydroxyurethane) media. Antibacterial activity assessed by disk diffusion method indicates that silver nanoparticles produced inhibition zones for both Escherichia coli and Staphylococcus aureus depending on silver concentration. The bacterial growth curve performed in the presence of silver nanoparticles showed a stronger antibacterial effect at lower concentrations than those described in the earlier reports. The effect was both dose and size dependent and was more pronounced against Gram negative bacteria than Gram positive one. The smallest Ag NPs used had a bactericidal effect resulting in killing E. coli cells. Scanning electron microscopy analysis indicated major damage and morphology changes of the silver nanoparticles treated bacterial cells. The major mechanism responsible for the antibacterial effect probably consists in clusters formation and nanoparticles anchorage to the bacterial cell surface.     

Automated imaging, identification, and counting of similar cells from digital hologram reconstructions

This paper presents our method, which simultaneously combines automatic imaging, identification, and counting with the acquisition of morphological information for at least 1000 blood cells from several three-dimensional images of the same sample. We started with seeking parameters to differentiate between red blood cells that are similar but different with respect to their development stage, i.e., mature or immature. We highlight that these cells have different diffractive patterns with complementary central intensity distribution in a given plane along the propagation axis. We use the Fresnel approximation to simulate propagation through cells modeled as spheroid-shaped phase objects and to find the cell property that has the dominant influence on this behavior. Starting with images obtained in the reconstruction step of the digital holographic microscopy technique, we developed a code for automated simultaneous individual cell image separation, identification, and counting, even when the cells are partially overlapped on a slide, and accurate measuring of their morphological features. To find the centroids of each cell, we propose a method based on analytical functions applied at threshold intervals. Our procedure separates the mature from the immature red blood cells and from the white blood cells through a decision based on gradient and radius values.     

Piezo-optic, photoelastic, and acousto-optic properties of SrB4O7 crystals

On the basis of studies of the piezo-optic effect, it has been shown that SrB(4)O(7) crystals can be used as efficient acousto-optic materials in the vacuum ultraviolet spectral range. The full matrices of piezo-optic and photoelastic coefficients have been experimentally obtained for these crystals. The acousto-optic figure of merit and the diffraction efficiency have been estimated for both the visible and deep ultraviolet spectral ranges.     

Prion‐associated proteins in yeast: comparative analysis of isogenic [PSI+] and [psi−] strains

A large group of prion‐associated proteins was identified in yeast cells using a new approach, comparative analysis of pellet proteins of crude cell lysates in isogenic strains of Saccharomyces cerevisiae differing by their prion composition. Two‐dimensional (2D) electrophoresis followed by MALDI analysis of the pellet proteins of [PSI⁺] and [psi^?] strains after prion elimination by GuHCl and prion transmission by cytoduction permitted identification of ca. 40 proteins whose aggregation state correlated with the change of prion(s) content. Approximately half of these proteins belonged to chaperones and to enzymes of glucose metabolism. Chaperones are known to be involved in prion metabolism and are expected to be present in prion‐containing aggregates, but glucose metabolism enzymes are not predicted to be present. Nevertheless, several recent data suggest that their presence is not incidental. We detected six proteins involved in oxidative stress response and eight in translation. Also notable is a protease. Most of the identified proteins seem to be prion‐associated, but we cannot exclude the possibility that several proteins may propagate as prions. Copyright © 2009 John Wiley & Sons, Ltd.     

Highways and some ecological problems of urban areas

The paper presents one of the first attempts at a multidisciplinary study of engineering geological and economic problems arising in the course of construction and operation of transport systems. It is shown that vibration (an obligatory attribute to highway impact on the geological environment) and frost heaving (manifesting in deformations and ruining of road surfacing and other elements of highways) are observed almost everywhere and can be considered among the most effective factors causing changes in the geological environment. The paper contains case studies and an estimation of the highway impact on the ecological situation in various regions.     

高氯酸杂环配合物金属盐的激光起爆（英）

1 IntroductionNowadays the electrical way of blast-caps initiation istraditional. But the devices used for this process are in-herently susceptible to an accident initiation by externalstimuli such as an electrostatic discharge (ESD), elec-tromagnetic interference (EMI), and radio wave irradia-tion (RI). Pulse laser initiation of explosives is a newperspective method. Pulse lasers provide practical meansof electrical isolation of the energetic materials, therebyeliminating hazards associat…     

Effect of water content on thermal and dynamic mechanical properties of xanthan powder: A comparison between standard and novel techniques

In this work, the sorption isotherms of xanthan powder obtained under static and dynamic conditions and their fitting with mathematical models were discussed. The transitions within xanthan-water systems have been investigated using a standard material characterization technique - Differential Scanning Calorimetry (DSC) - and two novel techniques - Dynamic Mechanical Thermal Analysis (DMTA) material pocket and Phase Transition Analysis (PTA). It was found that within water-xanthan systems, the onset temperature for the melting of freezable water obtained from DSC method was in agreement with freezable water melting peaks obtained via DMTA material pocket at levels of hydration when the freezable water was present. Also, low-temperature transitions, related to polysaccharide-water interactions, were observed by both techniques within xanthan systems which contained no freezable water. However, the use of the PTA technique was limited to xanthan systems with low water content.