Electroactive Ionic Soft Actuators with Monolithically Integrated Gold Nanocomposite Electrodes

Electroactive ionic gel/metal nanocomposites are produced by implanting supersonically accelerated neutral gold nanoparticles into a novel chemically crosslinked ion conductive soft polymer. The ionic gel consists of chemically crosslinked poly(acrylic acid) and polyacrylonitrile networks, blended with halloysite nanoclays and imidazolium‐based ionic liquid. The material exhibits mechanical properties similar to that of elastomers (Young's modulus ≈ 0.35 MPa) together with high ionic conductivity. The fabrication of thin (≈100 nm thick) nanostructured compliant electrodes by means of supersonic cluster beam implantation (SCBI) does not significantly alter the mechanical properties of the soft polymer and provides controlled electrical properties and large surface area for ions storage. SCBI is cost effective and suitable for the scaleup manufacturing of electroactive soft actuators. This study reports the high‐strain electromechanical actuation performance of the novel ionic gel/metal nanocomposites in a low‐voltage regime (from 0.1 to 5 V), with long‐term stability up to 76 000 cycles with no electrode delamination or deterioration. The observed behavior is due to both the intrinsic features of the ionic gel (elasticity and ionic transport capability) and the electrical and morphological features of the electrodes, providing low specific resistance (<100 Ω cm^?2), high electrochemical capacitance (≈mF g^?1), and minimal mechanical stress at the polymer/metal composite interface upon deformation.     

Multi-hazard loss analysis of tall buildings under wind and seismic loads

This paper presents a framework for life-cycle loss estimation for non-structural damage in tall buildings under wind and seismic loads. Life-cycle cost analysis is a useful design tool for decision- makers, aimed at predicting monetary losses over the lifetime of a structure, accounting for uncertainties involved in the problem definition. For tall buildings, sensitive to dynamic excitations like earthquake and wind, it can be particularly suitable to base design decisions not only on initial cost and performance but also on future repair expenses. The proposed approach harmonises the procedures for intervention costs evaluation of structures subjected to multiple-hazards, taking into account the peculiar differences of wind and earthquake, in terms of load characterisation, type and evolution of damage. Relative effect of the two hazards on damage to drift- and acceleration-sensitive non-structural elements are examined. The influence of uncertainty in structural damping is also taken into account. It is shown that, although it is commonly believed that the design of a given structure is usually dominated by either winds or earthquakes, when LCC-based design is performed, both winds and earthquakes may be important.     

Effectiveness of rank correlations in curvilinear relationships

Behaviormetrika - In cases where only linear relationships are suspected, Pearson’s correlation is generally used to measure the strength of the association between variables. It is...     

Risks and benefits related to alimentary exposure to xenoestrogens

Xenoestrogens are widely diffused in the environment and in food, thus a large portion of human population worldwide is exposed to them. Among alimentary xenoestrogens, phytoestrogens (PhyEs) are increasingly being consumed because of their potential health benefits, although there are also important risks associated to their ingestion. Furthermore, other xenoestrogens that may be present in food are represented by other chemicals possessing estrogenic activities, that are commonly defined as endocrine disrupting chemicals (EDCs). EDCs pose a serious health concern since they may cause a wide range of health problems, starting from pre-birth till adult lifelong exposure. We herein provide an overview of the main classes of xenoestrogens, which are classified on the basis of their origin, their structures and their occurrence in the food chain. Furthermore, their either beneficial or toxic effects on human health are discussed in this review.     

Effect of geometry and green density on the anisotropic sintering shrinkage of axisymmetric iron parts

Sintering shrinkage of prior cold compacted iron rings with different geometry (height to wall thickness ratio) and green density in the 6.5–7.3?g/cm³ range was investigated. It displays a minimum at an intermediate green density. Axial, tangential and radial shrinkages are different, due to the gradients of green density along the axial and the radial directions. Therefore, the effect of height on shrinkage and its anisotropy is the result of their effect on the stress distribution in the green parts during cold compaction, and the resulting green density and deformation experienced by the powder. Anisotropy decreases on increasing shrinkage.     

From experimental data,the mechanics relationships describing the behaviour of four different low alloyed steel powders during uniaxial cold compaction

This work aims at determining the constitutive model of four commercial water atomised low alloyed steel powders during cold compaction. Single-action experiments were performed, obtaining cylindrical specimens with different H/D ratios. The distribution of axial and radial stresses was investigated, and the relationships describing both the radial stress transmission coefficient and the flow stress as functions of the relative density were determined. The radial stress transmission coefficient also confirmed the hypothesised value of Poisson’s coefficient. The friction coefficient between the powder column and the die wall was determined, also highlighting the influence of the H/D ratio. Measuring the axial and radial strains due to spring-back, the axial and radial elastic moduli were determined, as functions of the relative density. The results obtained for the four materials were compared, also highlighting both differences and similarities.     

Application of energy rating methods to the existing building stock: Analysis of some residential buildings in Turin

The objective of this work is to contribute to the recent standardisation activity, finalized to apply the Energy Performance of Buildings Directive (EPBD). Through the energy assessment of some residential buildings in Turin (Italy), the work investigates the application of the calculation methods that have been specified in the recent European standard for the so-called “standard energy rating”. A comparison of the “calculated energy rating” with the “measured energy rating” is used to investigate the effect of user behaviour and weather conditions. Moreover, in order to draft the energy certificate and make an appropriate classification, the last part of the work investigates the way to find energy reference values of the building stock, through the study of the correlation between the input and the output data of an energy rating and the comparison of the analysed buildings.     

Adaptively browsing image databases with PIBE

Browsing large image collections is a complex and often tedious task, due to the semantic gap existing between the user subjective notion of similarity and the one according to which a browsing system organizes the images. In this paper we propose PIBE, an adaptive image browsing system, which provides users with a hierarchical view of images (the Browsing Tree) that can be customized according to user preferences. A key feature of PIBE is that it maintains local similarity criteria for each portion of the Browsing Tree. This makes it possible both to avoid costly global reorganization upon execution of user actions and, combined with a persistent storage of the Browsing Tree, to efficiently support multiple browsing tasks. We present the basic principles of PIBE and report experimental results showing the effectiveness of its browsing and personalization functionalities.     

Transformation of hematopoietic cell lines to growth-factor independence and induction of a fatal myelo- and lymphoproliferative disease in mice by retrovirally transduced TEL/JAK2 fusion genes

Recent reports have demonstrated fusion of the TEL gene on 12p13 to the JAK2 gene on 9p24 in human leukemias. Three variants have been identified that fuse the TEL pointed (PNT) domain to (i) the JAK2 JH1-kinase domain, (ii) part of and (iii) all of the JH2 pseudokinase domain. We report that all of the human TEL/JAK2 variants, and a human/mouse chimeric hTEL/mJAK2(JH1) fusion gene, transform the interleukin-3 (IL-3)-dependent murine hematopoietic cell line Ba/F3 to IL-3-independent growth. Transformation requires both the TEL PNT domain and JAK2 kinase activity. Furthermore, all TEL/JAK2 variants strongly activated STAT 5 by phosphotyrosine Western blots and by electrophoretic mobility shift assays (EMSA). Mice (n = 40) transplanted with bone marrow infected with the MSCV retrovirus containing either the hTEL/mJAK2(JH1) fusion or its human counterpart developed a fatal mixed myeloproliferative and T-cell lymphoproliferative disorder with a latency of 2-10 weeks. In contrast, mice transplanted with a TEL/JAK2 mutant lacking the TEL PNT domain (n = 10) or a kinase-inactive TEL/JAK2(JH1) mutant (n = 10) did not develop the disease. We conclude that all human TEL/JAK2 fusion variants are oncoproteins in vitro that strongly activate STAT 5, and cause lethal myelo- and lymphoproliferative syndromes in murine bone marrow transplant models of leukemia.