Production of stable amorphous form by means of spray drying

Spray drying is a very useful method for manufacturing of amorphous solid materials. This is mainly due to the possibility of fast solvent evaporation that leads to a rapid transformation of solution to a solid state. Besides evaporation kinetics, there are various process parameters that influence physical and chemical characteristics of such obtained material. The possibility of obtaining a stable amorphous structure of the active pharmaceutical ingredient in a spray dryer was examined. A solution of the hydrochloride crystalline structure of the active pharmaceutical ingredient in a mixture of water and acetonitrile was dried at different temperatures and flowrates of nitrogen used for atomization, as well as the flowrates of the solution. The influence of the process conditions on the properties of the product was analyzed. The final dried products were characterized and identified with a variety of analytical and physical methods. The results showed that a stable amorphous structure of the high purity active pharmaceutical ingredient is obtained, and that the optimal conditions of the process are defined. The amorphous structure is stable at temperatures below 200°C when it is transformed into a new crystal structure. Conditions of high relative air humidity lead to partial transformation.     

Plane Problem for Layered Composites with Periodic Array of Interfacial Cracks Under Compressive Static Loading

The current paper addresses the problem of 2-D modelling of the onset of failure process in a layered composite with periodic array of interfacial cracks under static compression along layers. The statement of the problem is based on the most accurate approach, the model of piecewise-homogenous medium. The condition of plane strain state is considered. The shear and the extensional buckling modes are examined. The laminae are modelled by transversally isotropic material (a matrix reinforced by continuous parallel fibres). The complex non-classical failure mechanics problem is solved utilizing finite element analysis. It is found that the 0°-plies volume fraction, the crack length and the mutual position of cracks influence the critical strain in the composite.     

A decade of sulphite control in Serbian meat industry and the effect of HACCP

In total 7351 meat preparations and fresh processed meat products were analysed from 555 different Serbian meat producers over a 10-year period, 4.5 years before and 5.5 years after mandatory Hazard Analysis and Critical Control Points (HACCP) implementation. From the obtained results, it could be concluded that HACCP has contributed to a better alignment of practices with the legal provisions. The share of non-compliant samples dropped from 18.6% before HACCP to 8.3% after its mandatory implementation. Average sulphite concentrations for all categories of meat preparations and fresh processed meat products decreased by 43%, declining from 33.6 to 19.3 mg kg^?1. Typical misuse and frequent abuse of sulphites was independent of a season. Application of HACCP principles in the Serbian meat industry raised awareness about the misuse of sulphites and contributed to a better control, minimising exposure to sulphites.     

Formation of pesticide nonextractable (bound) residues in soil: magnitude, controlling factors and reversibility

The analysis of the coherent data on nonextractable (bound) residues (NER) from the literature and EU pesticide registration dossiers allows the identification of general trends, in spite of the large variability and heterogeneity of data. About 50% of the pesticides reviewed exhibit a low proportion of NER (less than 30% of the initial amount) while only 12% of pesticides have a proportion of NER exceeding 70%. The lowest proportion of NER was found for dinitroanilines (<20%), and the largest value was obtained for carbamates, and in particular dithiocarbamates. The presence of chemical reactive groups, such as aniline or phenol, tends to yield a larger proportion of NER. NER originating from N-heteroatomic ring were found to be lower than those from phenyl-ring structures. Among the environmental factors affecting the formation of NER, microbial activity has a direct and significant effect. Concerning the NER uptake or their bioavailability, consistent data suggest that only a small percentage of the total amounts of NER can be released. The analysis of NER formation kinetics showed that incubation experiments are often stopped too early to allow a correct evaluation of the NER maturation phase. Therefore, there is a need for longer term experiments to evaluate the tail of the NER formation kinetics. Still, the heterogeneity of the NER data between pesticides and for specific pesticides calls for great care in the interpretation of the data and their generalization.     

The use of notch and short crack approaches to fretting fatigue threshold prediction: Theory and experimental validation

In this paper the similarities between fretted and notched components in terms of stress gradient and the consequent “size effect” are discussed. Critical distance and short crack arrest approaches for the prediction of fretting fatigue thresholds are then presented and the predictions are compared with experimental results. Two geometry and alloy combinations are considered in order to validate the prediction by the means of experimental results. In particular, both Hertzian fretting tests performed on Al4%Cu alloys and experiments carried out employing ‘flat and rounded’ contact pads, made of Ti6Al4V alloy, are used for the comparison. It is shown that both criteria provide good predictive capabilities. However, the short crack arrest method is less empirical and can be adapted to a wider range of applications (e.g. surface treated components).     

"If only I weren't" versus "If only I hadn't": Distinguishing shame and guilt in conterfactual thinking.

Examined the role of counterfactual thinking in 2 emotions: shame and guilt. In 1 series of studies, Ss read about situations evocative of shame and guilt or described personal experiences of guilt or shame. They then generated counterfactual alternatives to "undo" the distressing outcomes. Consistent with predictions derived from J. P. Tangney (see record 1992-05447-001), Ss tended to undo shame situations by altering qualities of the self and to undo guilt situations by altering actions. In a 2nd series of studies, Ss imagined themselves in a situation that could evoke either guilt or shame. Ss were then led to mutate the self or behavior to undo the situation. Mutation manipulations amplified shame and guilt such that the former Ss anticipated feeling greater shame, whereas the latter anticipated feeling greater guilt. The role of counterfactual thinking in specific emotions and in differentiating shame and guilt-prone personalities is discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

“Arbequina” Olive Oil Composition Is Affected by the Application of Regulated Deficit Irrigation during Pit Hardening Stage

Three new regulated deficit irrigation (RDI) treatments were applied to “Arbequina” olive orchards during pit hardening. Oil quality was determined by measuring analytical parameters for olive oil grading, antioxidant activity, total phenol content, fatty acid profile, volatile compounds profile, and sensory analysis. Oils from RDI were classified as “extra virgin olive oil” and their quality was improved due to their higher antioxidant potential (ABTS⁺ [increased ~75%] and DPPH^˙ [increased ~25%] assays) and phenols (increased ~53%) than control. Concentration of total volatile compounds decreased (~27%) but RDI olive oils showed a more balanced profile (alcohols, aldehydes, and esters). Monounsaturated fatty acid content increased (~5%) and atherogenic and thrombogenic indexes decreased (~8.5%) in RDI olive oil. Regarding sensory analysis, RDI provided more balanced oils with higher fruit aroma than control. Other benefits of RDI olive oil, when compared with oil from full irrigated orchards are reduced use of water and improved functional and sensory quality.     

Polytetrafluorethylene-based high-k composites with low dielectric loss filled with priderite (K1.46Ti7.2Fe0.8O16)

Composite materials with a high permittivity (high-k) and low dielectric loss represent an important research direction for the rapid development of modern electronic. This article is about high-k composite with low dielectric loss (dielectric constant is approximately 11, and dielectric loss is only 0.02 at 1 MHz and about 50 wt % of filler) based on a polytetrafluorethylene (PTFE) compounded with priderite (K_1.46Ti_7.2Fe_0.8O₁₆). The dielectric permittivity about ε' ≈ 10³ and the dielectric loss of tgδ ≈ 2 have been found for filler content about 50 wt % (30 vol %) and, respectively, ε' ≈ 11 and tgδ ≈ 0.02 for 1 MHz. To produce filler, amorphous potassium polytitanate was synthesized by molten salt method, modified in aqueous solution of iron sulfate, crystallized at 700 °C and further treated in the aqueous dispersion of PTFE. The obtained product was pressured, dried and investigated by X-ray diffraction and scanning electron microscopy. Dielectric properties of the composite with different ceramic filler content (1–90 wt %) were studied using impedance spectroscopy in the frequency range of 10⁻² to 10⁶ Hz. The influence of frequency on electric conductivity, permittivity, and dielectric losses was analyzed taking into account the experimental data on porosity, apparent density obtained for the composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48762.     

The Palladium(II) Complex of Aβ4−16 as Suitable Model for Structural Studies of Biorelevant Copper(II) Complexes of N-Truncated Beta-Amyloids

The Aβ4−42 peptide is a major beta-amyloid species in the human brain, forming toxic aggregates related to Alzheimer’s Disease. It also strongly chelates Cu(II) at the N-terminal Phe-Arg-His ATCUN motif, as demonstrated in Aβ4−16 and Aβ4−9 model peptides. The resulting complex resists ROS generation and exchange processes and may help protect synapses from copper-related oxidative damage. Structural characterization of Cu(II)Aβ4−x complexes by NMR would help elucidate their biological function, but is precluded by Cu(II) paramagneticism. Instead we used an isostructural diamagnetic Pd(II)-Aβ4−16 complex as a model. To avoid a kinetic trapping of Pd(II) in an inappropriate transient structure, we designed an appropriate pH-dependent synthetic procedure for ATCUN Pd(II)Aβ4−16, controlled by CD, fluorescence and ESI-MS. Its assignments and structure at pH 6.5 were obtained by TOCSY, NOESY, ROESY, 1H-13C HSQC and 1H-15N HSQC NMR experiments, for natural abundance 13C and 15N isotopes, aided by corresponding experiments for Pd(II)-Phe-Arg-His. The square-planar Pd(II)-ATCUN coordination was confirmed, with the rest of the peptide mostly unstructured. The diffusion rates of Aβ4−16, Pd(II)-Aβ4−16 and their mixture determined using PGSE-NMR experiment suggested that the Pd(II) complex forms a supramolecular assembly with the apopeptide. These results confirm that Pd(II) substitution enables NMR studies of structural aspects of Cu(II)-Aβ complexes.     

Decellularization of Human Pancreatic Fragments with Pronounced Signs of Structural Changes

A significant lack of donor organs restricts the opportunity to obtain tissue-specific scaffolds for tissue-engineering technologies. One of the acceptable solutions is the development of decellularization protocols for a human donor pancreas unsuitable for transplantation. A protocol of obtaining a biocompatible tissue-specific scaffold from decellularized fragments with pronounced human pancreas lipomatosis signs with preserved basic fibrillary proteins of a pancreatic tissue extracellular matrix was developed. The scaffold supports the adhesion and proliferation of human adipose derived stem cell (hADSCs) and prolongs the viability and insulin-producing function of pancreatic islets. Experiments conducted allow for the reliance on the prospects of using the donor pancreas unsuitable for transplantation in the technologies of tissue engineering and regenerative medicine, including the development of a tissue equivalent of a pancreas.