A Distributed and Elastic Application Processing Model for Mobile Cloud Computing

The latest developments in mobile computing technology have increased the computing capabilities of smart mobile devices (SMDs). However, SMDs are still constrained by low bandwidth, processing potential, storage capacity, and battery lifetime. To overcome these problems, the rich resources and powerful computational cloud is tapped for enabling intensive applications on SMDs. In Mobile Cloud Computing (MCC), application processing services of computational clouds are leveraged for alleviating resource limitations in SMDs. The particular deficiency of distributed architecture and runtime partitioning of the elastic mobile application are the challenging aspects of current offloading models. To address these issues of traditional models for computational offloading in MCC, this paper proposes a novel distributed and elastic applications processing (DEAP) model for intensive applications in MCC. We present an analytical model to evaluate the proposed DEAP model, and test a prototype application in the real MCC environment to demonstrate the usefulness of DEAP model. Computational offloading using the DEAP model minimizes resources utilization on SMD in the distributed processing of intensive mobile applications. Evaluation indicates a reduction of 74.6% in the overhead of runtime application partitioning and a 66.6% reduction in the CPU utilization for the execution of the application on SMD.

     

Enhancement of Satellite Image Compression Using a Hybrid (DWT–DCT) Algorithm

Discrete Cosine Transform (DCT) and Discrete Wavelet Transform (DWT) image compression techniques have been utilized in most of the earth observation satellites launched during the last few decades. However, these techniques have some issues that should be addressed. The DWT method has proven to be more efficient than DCT for several reasons. Nevertheless, the DCT can be exploited to improve the high-resolution satellite image compression when combined with the DWT technique. Hence, a proposed hybrid (DWT–DCT) method was developed and implemented in the current work, simulating an image compression system on-board on a small remote sensing satellite, with the aim of achieving a higher compression ratio to decrease the onboard data storage and the downlink bandwidth, while avoiding further complex levels of DWT. This method also succeeded in maintaining the reconstructed satellite image quality through replacing the standard forward DWT thresholding and quantization processes with an alternative process that employed the zero-padding technique, which also helped to reduce the processing time of DWT compression. The DCT, DWT and the proposed hybrid methods were implemented individually, for comparison, on three LANDSAT 8 images, using the MATLAB software package. A comparison was also made between the proposed method and three other previously published hybrid methods. The evaluation of all the objective and subjective results indicated the feasibility of using the proposed hybrid (DWT–DCT) method to enhance the image compression process on-board satellites.     

Scanning electron and light microscopy of foliar epidermal characters: A tool for plant taxonomists in the identification of grasses

SEM and light microscopy are of special interest for biologist to observe various features of the living bodies. In the current study we observed the foliar epidermal micro‐morphological characters of 44 grass species using SEM and Light microscopy to assess their taxonomic utility for taxonomists in the identification process. The aim of this study is to use the foliar epidermal structural variations in both upper and lower surfaces for identification of grasses. Significant diversity was observed in both qualitative and quantitative characters using SEM and Light microscopy. Variations were observed in stomatal number, size, guard cells shape, silica bodies, macro‐hairs, micro‐hairs, epidermal cell number, subsidiary cells, prickles, hooks, papillae, and short and long cells. A taxonomic key is prepared using these variations for the identification of grass species. Based on these findings, SEM and Light microscopy of foliar epidermal features can be of special interest for taxonomists in the identification of complex grass taxa.     

A routing algorithm for reducing optical loss in photonic Networks-on-Chip

Driven by increase in automation, smart homes play an important role in today’s human life. This paper presents a new model for smart home technologies based on multi-device bidirectional visible light communication (VLC). For multiple devices and users, orthogonal code-based wavelength division (color beams) full-duplexed bidirectional VLC link is proposed. The color beams from RGB LEDs are utilized to transmit data and synchronize multi-device transmission. To enhance the performance of the proposed model, receiver diversity is also employed. Performance evaluation reveals that the proposed VLC-based model for smart homes is efficient with superior BER performance in a typical smart home environment except for the far corners. The maximum achievable data rate for each user up to four users is found to be 24 Mbps at both uplink and downlink transmissions.     

Tuning the interlaminar shear strength and thermo-mechanical properties of glass fiber composites by incorporation of (3-mercaptopropyl) trimethoxysilane-functionalized carbon black

The incorporation of functionalized nanoscale fillers into traditional glass fiber/unsaturated polyester (GF/UPE) composites provides a more robust mechanical attributes. The current study demonstrates the potential of 3-mercaptopropyl trimethoxysilane (MPTS)-functionalized carbon black (f-CB) for enhancing the thermo-mechanical properties of GF composites. The composites infused with 1, 3 and 5 wt% of pristine and MPTS-functionalized CB were fabricated by hand lay-up and hot press processing. Tensile testing, interlaminar shear strength (ILSS) testing and dynamic mechanical analysis were used to evaluate the performance of nanocomposites. Fourier transform infrared spectroscopy validated the MPTS functionalization of CB. Pristine CB-loaded nanocomposites exhibited marginal improvement in ultimate tensile strength (UTS), ILSS and thermo-mechanical properties. However, with the addition of f-CB, the improvement in all the studied properties was more substantial. The inclusion of 5 wt% f-CB increased the elastic modulus and UTS by 16 and 22%, respectively, whereas the ILSS was enhanced by 36%, in comparison to the neat GF composite. The scanning electron microscope analysis of fractured ILSS samples revealed better fiber-matrix adhesion and compatibility in f-CB-loaded nanocomposites. At the same filler weight percentage, the storage modulus at 25 °C was ~ 19% higher than that of neat composite. The f-CB inclusion resulted in increment of T _g by ~ 13 °C over the T _g of neat GF/UPE composite (~ 109 °C). These improvements were due to the chemical connection of f-CB to the UPE matrix and GF surface. With such improvements in thermal and mechanical properties, these nanocomposites can replace the conventional GF composites with prominent improvements in performance.     

Investigation of the effect of temperature and layup on the press forming of polyvinyl chloride-based composite laminates and fiber metal laminates

Semi-crystalline thermoplastic-based composite laminates and fiber metal laminates have a narrow forming temperature window, which limits formability of these products. The intention of this study was investigation of non-melting amorphous polyvinyl chloride as a proper matrix to increase the formability and forming temperature window of these products. For this, [45/?45] and [0/90] layups of polyvinyl chloride-based composite laminates and fiber metal laminates were produced using the film-stacking procedure and later press formed into channel sections at six temperatures in the range of 80 to 200 °C. The effects of the layups and forming temperatures on the forming loads and spring back of the formed profiles were measured, and their effects on the fiber buckling, wrinkling, and delamination of the profiles were evaluated using optical microscope images. The effects of layups and forming temperatures on the deformation mechanisms were also analyzed using the grid strain analysis method. Of the fiber metal laminates, 160 °C was found as the minimum forming temperature, and for the composite laminates, 120 and 160 °C were found as the minimum proper forming temperatures of [45/?45] and [0/90] layups, respectively. Finally, the forming temperature windows and formability of polyvinyl chloride matrix composite laminates and fiber metal laminates were found higher than semi-crystalline matrices.     

Comparative Study of Tocopherol Contents and Fatty Acids Composition in Twenty Almond Cultivars of Afghanistan

Afghanistan is the fourth largest producer of almonds in the world producing 78 native and 6 imported cultivars. However, till date, there have been no comprehensive data on nutrient profiles of the native cultivars. Thus, in the present investigation, tocopherol contents and fatty acid composition from the kernels of 20 selected native almond cultivars of Afghanistan were analyzed. The ranges of variability for the studied nutrients were similar to those already reported for almonds grown in other countries, such as 47.8–66.1% of total lipids (fresh weight basis), 62.54–81.57% of oleic acid in the total lipids, and 139.1–355.0 μg/g α-tocopherol in kernels. With respect to cultivars, significantly (p < 0.05) high content of total lipids were recorded in ‘Belabai’ and ‘Sattarbai’ (Afghan grade), oleic acid in ‘Khairodini’ and of α-tocopherol in ‘Khairodini-161 Samangan’ and ‘Belabai’ cultivars. Kernels from these cultivars can be used for nutrient dense food formulations. Daily consumption of 50 g almonds is sufficient to meet the RDA of α-tocopherol (15 mg/day), considering the average 300 μg/g of α-tocopherol in Afghan almonds. Also, these nutrient rich cultivars can be used in almond breeding programs globally, to focus on improving kernel oil composition and nutrient contents.     

Measurement of natural radioactivity and dose rate assessment of terrestrial gamma radiation in the soil of southern Punjab, Pakistan

Activity concentrations of (226)Ra, (232)Th, (40)K and (137)Cs in soil samples collected from the most populous area of southern Punjab of Pakistan have been measured by gamma-ray spectrometry. The measured activity concentrations for these radionuclides are compared with the reported data from different other countries and it is found that measured activity concentrations are comparable with the worldwide measured average values reported by the UNSCEAR. Subsequently assessed radiological effects show that the mean radium equivalent activity (Ra(eq)) is 96.7 +/- 15.2 Bq kg(-1) and air absorbed dose rate (D) is 46.1 +/- 7.3 nGy h(-1). The values of internal and external radiation hazard indices are found to be less than unity. The annual effective radiation dose is calculated to be 0.28 +/- 0.05 mSv, which is well below the limit of 1.0 mSv y(-1) recommended by the International Commission on Radiological Protection, for the general public.     

Synthesis of nanocrystalline materials through reverse micelles: A versatile methodology for synthesis of complex metal oxides

We have been successful in obtaining monophasic nanosized oxides with varying chemical compositions using the reverse micellar method. Here we describe our methodology to obtain important metal oxides like ceria, zirconia and zinc oxide. The oxalate of cerium, zirconium and zinc were synthesized using the reverse micellar route. While nanorods of zinc oxalate with dimension, 120 nm in diameter and 600 nm in length, could be obtained, whereas spherical particles of size, 4–6 nm, were obtained for cerium oxalate. These precursors were heated to form their respective oxides. Mixture of nanorods and nanoparticles of cerium oxide was obtained. ZrO₂ nanoparticles of 3–4 nm size were obtained by the thermal decomposition of zirconium oxalate precursor. ZnO nanoparticles (55 nm) were obtained by the decomposition of zinc oxalate nanorods. Photoluminescence (PL) studies at 20 K shows the presence of three peaks corresponding to free excitonic emission, free to bound and donor-acceptor transitions. We also synthesized nanoparticles corresponding to Ba_1−x Pb _x ZrO₃ using the reverse micellar route. The dielectric constant and loss were stable with frequency and temperature for the solid solution.