Studies on the formation of poly(ethylene terephthalate): 2. Rate of transesterification of dimethyl terephthalate with ethylene glycol

The transesterification of dimethyl terephthalate (DMT) with ethylene glycol (EG) was kinetically investigated in the presence of various catalysts at 197°C. The reaction was followed by the measurement of the quantity of methanol which distilled from the reaction vessel. This distillation made corrections of reactant and catalyst concentrations necessary. The transesterification was assumed to obey first-order kinetics with respect to DMT and EG, and a rate equation was derived. The reaction was found to be first order in catalyst concentration as well and when this finding was incorporated in the rate equation, excellent agreement between the observed and calculated values was recognized throughout the reaction. The first-order dependence on the catalyst concentration is valid below a critical concentration which was found to be dependent on the catalyst type. Above this concentration a lower reaction order was observed.     

Compositional analysis of deasphalted oil before and after hydrocracking over zeolite catalyst by Fourier transform ion cyclotron resonance mass spectrometry

Elemental compositions of components in feed and catalytically processed deasphalted oils were characterized by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). The processed oils which were hydrocracked over a zeolite catalyst at three different reaction temperatures (370, 380, and 390 °C) were analyzed. Species of the deasphalted oils were ionized either by electrospray ionization (ESI) or by in-beam electron ionization (EI). The ESI mass spectra were obtained from every feed and processed deasphalted oil. Over 550 chemically different compounds were observed in the feed oil mass spectra. Molecular formulas for the detected peaks were calculated by using accurate mass. The compounds with one N atom as well as one N and S atoms were detected as major and minor component, respectively, in every mass spectrum. The number of the detected species in processed deasphalted oil decreases as the reaction temperature increases. However, the carbon distribution of NS-containing species shifts to high number as the reaction temperature increases. Molecular formulas distribution against Z-value (Z-value is defined as C_nH_2n + ZN_mS_sO_o) and C-number were investigated for the ESI mass spectra. Z-value distribution of the peaks assigned to N-compounds was convergent in its compounds with Z = − 25 as increasing the reaction temperature. Detailed mass spectrum analysis reveals that compounds which were not detected in the feed oil were observed in the mass spectra of processed oils; N, S, and O-containing compounds. For the in-beam EI only the processed oil at 390 °C yields approximately 700 resolved peaks at adopted probe temperature (300 °C) of EI. Molecular formula analysis for the observed peaks was conducted as well as ESI. It reveals that the molecular formulas having Z-value (− 30 < Z < 2) and carbon number ranged from 8 to 31 except for (− 18 < Z < − 12, 15 < C-number < 22) were contained in the processed deasphalted oil. Using complementary ionization techniques to characterize the feed and catalytic reacted deasphalted oils provide better understanding of fuel processing conditions.     

Ageing and work-hardening behaviour of a commercial AA7108 aluminium alloy

In the 7xxx aluminium alloying system several mechanisms influence the hardening behaviour of the alloys, e.g. particle size and distribution, dislocation density and alloying elements in solid solution. This work is an experimental study of ageing and work-hardening considering a commercial AA7108 alloy in the as-cast and homogenized condition. Tensile specimens have been exposed to a solution heat treatment and a two-step age-hardening treatment with varying time at the final temperature. The tensile data for the different tempers have been evaluated in elucidation of already existing models based on a one-parameter framework. The precipitate size and distribution have been further investigated in the transmission electron microscope for a selection of tempers, and the influence of these parameters on the work-hardening behaviour has been discussed.     

Chemical Quality of Raw Milk Retentate processed by Ultra‐filtration or Reverse Osmosis at the Dairy Farm

Concentrating raw milk at the dairy farms – rather than at the dairy – reduces energy consumption and CO₂ emission, due to less road transportation of the milk. This study demonstrates whether it is possible to use either reverse osmosis or ultra‐filtration for milk concentration at the farm without harming the milk quality, regarding lipolysis and proteolysis. Filtration at low temperature (4 °C) secures a good milk quality. Despite reverse osmosis operating at much higher feed pressures, the effect on lipolysis is small, which makes this technology the most applicable, as lactose is withhold in retentate.     

Completion of IFMIF/EVEDA lithium test loop construction

The EVEDA Li test loop (ELTL) successfully completed its construction and installation of a total of 2.5-ton Li in the frame work of the IFMIF/EVEDA as one of the ITER-BA. Design for the ELTL had been done from March 2009 to December 2009 in large part, and then the construction was started on November 2009 in the O-arai site of the Japan Atomic Energy Agency and completed on the middle of November 2010 after passing an authority inspection by a fire department in O-arai town. Subsequently, the 2.5-ton Li was installed to the ELTL by using a glove box in the form of ingots which is 240 mm long and 125 mm in diameter. The nitrogen concentration in the 2.5-ton Li was found to be 127 wppm. During the installation, the oxygen concentration and the humidity in the glove box were almost kept less than 20 wppm, and any large contamination by air was prevented during the handling of Li.     

Evaluation of hilar pulmonary vessels using magnetic resonance angiography (MRA)

OBJECTIVE: To assess the relationship between ethnicity and decision-makers expressing healthcare wishes in a group of frail older persons enrolled in the Program of All-inclusive Care for the Elderly (PACE). DESIGN: A retrospective chart review of 1193 participants in the PACE program. SETTING: Program of All-inclusive Care for the Elderly, a comprehensive managed care demonstration program serving frail older participants at 10 sites across the nation. PARTICIPANTS: A total of 1193 older adults, all of whom met state criteria for nursing home level of care. Three hundred were non-Hispanic whites, 364 were black, 156 were Hispanic, and 288 were Asian. MEASUREMENTS: Demographic characteristics of the patients and the presence or absence of an alternative decision-maker; the characteristics of alternative decision-makers included the relationship to the participant as recorded in the patient's medical record. RESULTS: Ninety-one percent of white patients expressed their own healthcare wishes in contrast to only 85% of Hispanic, 83% of Asian, and 67% of black patients. An alternative decision-maker was identified for about 15% of Asians and Hispanics and for one-third of blacks, but only about 8% of whites had an alternative decision-maker. Black and Hispanic patients were most likely to have a daughter as an alternative decision-maker, Asians were most likely to have a son, and whites patients were most likely to have a spouse as an alternative decision-maker. Blacks, particularly black men, were the most likely to have a relative other than a spouse or child as an alternative decision-maker. CONCLUSIONS: In this population, we found significant ethnic variation in the person identified to be the decision-maker in a group of frail older people. Ethnic variation reflected sociodemographic as well as cultural differences. However, there are important limitations to this study, and caution should be used in extrapolating the results to other populations or in attributing the results to ethnicity alone. An awareness of cross-cultural patterns in identified or de facto decision-makers can be significant for healthcare workers when they approach patients and their families about issues surrounding end of life decisions.     

Analysis of polarization bistability of phase-shifted DFB laser dueto TM light injection

As a method of high-bit-rate optical processing, the TM light injection-induced optical polarization bistability using Fabry-Perot type laser diodes has been experimentally demonstrated and theoretically analyzed. In these studies, although switching times less than 1 ns both for switch-up and switch-down have been reported, both of the TE and TM outputs exhibit longitudinal multimode spectra. In practical processing systems, a dynamically stable operation of the polarization switching is considered to be essential. It is the purpose of this paper to present an analytical study of the TM light injection-induced polarization bistability using a λ/4-shifted distributed feedback (DFB) laser model and to describe the detailed picture of the mechanism     

Ultrasound bath-assisted enzymatic hydrolysis procedures as sample pretreatment for the multielement determination in mussels by inductively coupled plasma atomic emission spectrometry

Ultrasound energy has been applied to speed up enzymatic hydrolysis processes of mussel tissue in order to determine trace and ultratrace elements (As, Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn). The element releases, by action of three proteases (pepsin, pancreatin, trypsin), lipase, and alpha-amylase, have been evaluated by inductively coupled plasma atomic emission spectrometry. Different variables such as pH, sonication temperature, ionic strength, hydrolysis time, ultrasound frequency, extracting volume, and enzyme mass were simultaneously studied by applying an experimental design approach (Plackett-Burman design and central composite design). Results showed that the hydrolysis time was statistically nonsignificant (confidence interval of 95%) for most of the elements and enzymes, meaning that the hydrolysis procedure can be finished within a 30-60-min range. These hydrolysis times are far shorter than those obtained when using thermostatic cameras, between 12 and 24 h. Statistically significant factors were the ultrasound frequency (the highest metals releasing at high-ultrasound frequency), pH, sonication temperature, and ionic strength. All metals can be extracted using the same operating conditions (pH of 1.0 and sodium chloride at 1.0% for pepsin; pH of 7.5, temperature at 37 degrees C, and 0.4 M potassium dihydrogen phosphate/potassium hydrogen phosphate buffer for amylase; pH of 8.0 and 0.5 M potassium dihydrogen phosphate/potassium hydrogen phosphate buffer for pancreatin; pH of 5.0 and 0.5 M potassium dihydrogen phosphate/potassium hydrogen phosphate buffer for lipase; pH of 8.0 and 0.2 M potassium dihydrogen phosphate/potassium hydrogen phosphate buffer for trypsin). Analytical performances, such as limits of detection and quantification, repeatability of the overall procedure, and accuracy, by analyzing DORM-1, DORM-2, and TORT-1 certified reference materials, were finally assessed for each enzyme.