The pumping performances of the turbomoleculae pump simulated by direct simulation monte carlo method

Turbomolecular pumps (TMPs) are used extensively in several highly important areas of industry and research. The performances of TMP are evaluated by maximum throughput and maximum pressure ratio. In this paper, they are investigated by DSMC method. A 3D analysis in a rotating reference frame is proposed to simulate this flow field. Considering the Coriolis and centrifugal accelerations, the equations about the molecular velocities and position are deduced. The VSS model and NTC collision schemes are used to calculate the intermolecular collisions. The diffuse reflection is employed on the molecular reflection from the surfaces of boundary. The procedures for establishment of the correct collision rate are based on the cells, while individual collision pairs are chosen from the sub-cells. The pump performances of one stage TMP under the different kinds of gas, different heights, and different blade angles are simulated and the results are analyzed. Numerical results agree well with the existing experiment data.     

Reduction of defects and improvement in the performance of blue phosphor for thick‐dielectric electroluminescent displays using Color‐by‐Blue

Abstract— Defect‐free large‐area inorganic thick‐dielectric EL (TDEL) displays using Color by Blue (CBB) technology have been successfully developed. We have achieved the world's highest blue‐phosphor luminance of 900 cd/m² for a single‐pixel device by using CBB and by optimizing the e‐beam gun configuration and the flow rate of H₂S in the vacuum chamber. By analyzing the defects on panels with triple‐pattern phosphors and CBB panels, we also found that the number of defects on CBB panels can be drastically reduced compared with those on triple‐pattern panels. The defect‐free 17‐in. VGA CBB panels show better characteristics, a high peak luminance of 600 cd/m² and a high contrast ratio of 1000:1, compared with those of triple‐pattern panels.     

A two-degree-of-freedom motor-powered gait orthosis for spinal cord injury patients

A number of orthoses have been developed to restore stance and walking in paraplegic subjects. Compliance, however, has been limited, mainly owing to walking effort. Use of the forces produced by actuators is an effective way to solve the problem of the considerable effort required for orthotic gait, namely high muscular effort and high energy expenditure. The purpose of the present study was to investigate the effects of assistance by external actuators on the orthotic gait of spinal cord injury (SCI) patients. Two kinds of linear actuator were developed by using direct current (d.c.) motors for assisting the knee and hip joint of a gait orthosis. They were mounted on the knee and hip joint of a commercial advanced reciprocating gait orthosis (ARGO), and a new two-degree-of-freedom externally powered gait orthosis was thus developed. The orthosis was assessed through inter-subject experiments on five male adult complete SCI patients. Owing to the short training period available for the assisted gait, simultaneous operation of both joint actuators was not conducted: either the knee actuation or the hip actuation was executed only. Thus, the knee actuator and the hip actuator were assessed with a T12 subject and with subjects for T5, T8, T11, and T12 respectively. The motions of the gaits, assisted by the linear actuators, were measured by a Vicon 370 system, and the general gait parameters and compensatory motions were evaluated. Results demonstrated that (a) all subjects could walk without falling, assisted either by the knee or the hip actuator; (b) both the knee and hip joint actuator increased the gait speed and the step length; (c) the knee flexion produced by the orthosis improved the dynamic cosmesis of walking; and (d) lateral compensatory motions as well as vertical ones tended to decrease when the hip joint was assisted, which could contribute to a reduction in walking effort.     

Microstructure and mechanical properties of hot extruded Mg–Al–Mn–Ca alloy produced by rapid solidification powder metallurgy

The microstructure and mechanical properties of hot extruded Mg–Al–Mn–Ca alloy was investigated. Both rapid solidified powders and cast billets were extruded at 573, 623 and 673 K to optimize the processing conditions for obtaining better mechanical response. Powder was consolidated to prepare the extrusion billets using both cold compaction and Spark Plasma Sintering at 473 K. The tensile properties of the extruded alloy were then evaluated and correlated to the observed microstructure. The results show that the use of rapid solidified powder could lead to effective grain refinement, which in turn resulted in the improved mechanical response, especially compared to the extruded conventional cast material.     

Multi-objective genetic algorithm for solving N-version program design problem

N-version programming (NVP) is a programming approach for constructing fault tolerant software systems. Generally, an optimization model utilized in NVP selects the optimal set of versions for each module to maximize the system reliability and to constrain the total cost to remain within a given budget. In such a model, while the number of versions included in the obtained solution is generally reduced, the budget restriction may be so rigid that it may fail to find the optimal solution. In order to ameliorate this problem, this paper proposes a novel bi-objective optimization model that maximizes the system reliability and minimizes the system total cost for designing N-version software systems. When solving multi-objective optimization problem, it is crucial to find Pareto solutions. It is, however, not easy to obtain them. In this paper, we propose a novel bi-objective optimization model that obtains many Pareto solutions efficiently.We formulate the optimal design problem of NVP as a bi-objective 0–1 nonlinear integer programming problem. In order to overcome this problem, we propose a Multi-objective genetic algorithm (MOGA), which is a powerful, though time-consuming, method to solve multi-objective optimization problems. When implementing genetic algorithm (GA), the use of an appropriate genetic representation scheme is one of the most important issues to obtain good performance. We employ random-key representation in our MOGA to find many Pareto solutions spaced as evenly as possible along the Pareto frontier. To pursue improve further performance, we introduce elitism, the Pareto-insertion and the Pareto-deletion operations based on distance between Pareto solutions in the selection process.The proposed MOGA obtains many Pareto solutions along the Pareto frontier evenly. The user of the MOGA can select the best compromise solution among the candidates by controlling the balance between the system reliability and the total cost.     

Balanced Scheduling toward Loss-Free Packet Queuing and Delay Fairness

In current networks, packet losses can occur if routers do not provide sufficiently large buffers. This paper studies how many buffers should be provided in a router to eliminate packet losses. We assume a network router has m incoming queues, each corresponding to a single traffic stream, and must schedule at any time on-line from which queue to take the next packet to send out. To exclude packet losses with a small amount of buffers, the maximum queue length must be kept low over the entire scheduling period. We call this new on-line problem the balanced scheduling problem (BSP). By competitive analysis, we measure the power of on-line scheduling algorithms to prevent packet losses. We show that a simple greedy algorithm is Θ(log m)-competitive which is asymptotically optimal, while Round-Robin scheduling is not better than m-competitive, as actually is any deterministic on-line algorithm for BSP. We also give a polynomial time algorithm for solving off-line BSP optimally. We also study another on-line balancing problem that tries to balance the delay among the m traffic streams.     

Current steel forgings and their properties for steam generator of nuclear power plant

Current steel forgings used for the construction of steam generators (SGs) for a nuclear power plant (NPP) were introduced from the following three (3) features. (1) Integral type steel forgings such as (i) primary head integrated with nozzles, manways and supports, (ii) steam drum head integrated with nozzle and handhole, (iii) conical shell integrated with cylindrical sections and handholes, have been developed to enhance the structural integrity of the component and to make fabrication and inspection including in-service inspection easier. (2) The high strength steel such as SA508 Cl.3a has been adopted to decrease the weight of components, resulting in enhancement of aseismatic properties of SG. (3) Low Si SA508 Cl.3 steel with the addition of Al was investigated and was applied to a heavy thick tube sheet forging, to minimize the macro- and micro-segregations in the ingot.     

Total-reflection active-mirror amplifier for high pulse energy and high average power by using a composite ceramic

A total-reflection active-mirror (TRAM) amplifier is functionally designed by using a composite ceramic for high pulse energy and high average power. A chirped-pulse regenerative amplifier with a cryogenic TRAM has been successfully demonstrated as a feasibility study. A 3.5 mJ pulse energy is obtained at a repetition rate of 100 Hz. The corresponding energy fluence on the TRAM is as high as 1.5 J/cm² for 0.46 ns short pulses. The M²-factor is below 1.1 and no significant beam distortion is observed.     

Robust and accurate prediction of thermal error of machining centers under operations with cutting fluid supply

A novel temperature measuring system named LATSIS was proposed to realize a robust and accurate prediction of the thermal deformation of machining centers, even under external disturbances such as cutting fluid supply. LATSIS enables a drastic increase in the number of sensors employed for measuring the temperature of the machine tool. Thus, the entire temperature distribution can be obtained by interpolating the measured temperature 3-dimensionally without calculating the heat conduction. A set of experiments was conducted in which the LATSIS was employed to predict the TCP error. A total of 284 sensors were placed on the machining center, and the TCP error was predicted based on the measured temperature for the situation with/without the cutting fluid supply. The results of the prediction showed good agreement with the measured TCP error even during the initial transient temperature change as well as in the cooling phase after the machine halt. The TCP error with the cutting fluid supply is accurately predicted. LATSIS was proven to be a robust and accurate method for predicting the thermal deformation of machine tools, and is a promising technology for future manufacturing systems.